Ruize Xu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ruize Xu has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Yi Li
Xidian University
8 shared publications - Zheng Xiang
State Key Laboratory of Integrated Services Networks, Xidian University, Xian, China
8 shared publications - Peng Ren
State Key Laboratory of Integrated Services Networks, Xidian University, Xian, China
6 shared publications - Baoyi Xu
State Key Laboratory of Integrated Services Networks, Xidian University, Xian, China
4 shared publications - Chao Gu
Queen’s University Belfast
2 shared publications - Keqing Chen
State Key Laboratory of Integrated Services Networks, Xidian University , Xi'an 710071
2 shared publications
Latest Publications
- 17 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (7) , 6383-6395
Design of Multiband Dual-Polarized AFSS With Flexibly Controllable Passbands for Wireless Systems
This paper proposes a varactor-diode-based active frequency selective surface (AFSS) with flexibly controllable passbands. The design enables independent tuning of three distinct passbands, as well as dynamic control over the number of active passbands. Such capabilities are particularly advantageous for addressing the requirements of multi-band transmission and dynamic reconfiguration in 5G/6G wireless communication networks. Starting from the design of a single-band tunable AFSS model and based on equivalent circuit model (ECM) theory, the structure is progressively upgraded to multi-band independently tunable AFSS. The proposed design features a top layer comprising metallic periodic patterns and symmetrically arranged varactor diodes, while the bottom layer incorporates three sets of independent bias networks and choke inductors. A theoretical analysis of the proposed AFSS has been carried out, and simulation results demonstrate that the design exhibits three passbands with independent tunability and the ability to dynamically switch the number of passbands. Moreover, the AFSS achieves excellent polarization insensitivity and angular stability. Finally, the bias network is engineered and a prototype is fabricated for measurement. The tested results show good agreement with simulation data, confirming the AFSS’s superior reconfigurability and scalability. This work offers a versatile framework for realizing multi-standard, multi-band communication systems with flexible passband engineering and reconfigurable operating modes.
- 17 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (7) , 6383-6395
Design of Multiband Dual-Polarized AFSS With Flexibly Controllable Passbands for Wireless Systems
This paper proposes a varactor-diode-based active frequency selective surface (AFSS) with flexibly controllable passbands. The design enables independent tuning of three distinct passbands, as well as dynamic control over the number of active passbands. Such capabilities are particularly advantageous for addressing the requirements of multi-band transmission and dynamic reconfiguration in 5G/6G wireless communication networks. Starting from the design of a single-band tunable AFSS model and based on equivalent circuit model (ECM) theory, the structure is progressively upgraded to multi-band independently tunable AFSS. The proposed design features a top layer comprising metallic periodic patterns and symmetrically arranged varactor diodes, while the bottom layer incorporates three sets of independent bias networks and choke inductors. A theoretical analysis of the proposed AFSS has been carried out, and simulation results demonstrate that the design exhibits three passbands with independent tunability and the ability to dynamically switch the number of passbands. Moreover, the AFSS achieves excellent polarization insensitivity and angular stability. Finally, the bias network is engineered and a prototype is fabricated for measurement. The tested results show good agreement with simulation data, confirming the AFSS’s superior reconfigurability and scalability. This work offers a versatile framework for realizing multi-standard, multi-band communication systems with flexible passband engineering and reconfigurable operating modes.
- 7 April 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (8) , 13865
Dual-polarized angle-selective surface with ultra-narrow angular selectivity and broadband characteristics
This paper designs an angle-selective surface (ASS) composed of two identical layers of frequency-selective surfaces (FSS) with regular hexagonal structures. By leveraging the equivalent circuit model (ECM) theory and the modal interaction poles (MIPs) principle, the interlayer height is optimized to modulate electromagnetic coupling between layers, thereby achieving angular selectivity. The structure exhibits excellent ultra-narrow angular domain transmission characteristics, with the width of the transmission angle domain where | S 21 | > −1dB is less than 0.1° under TE polarization and only 0.7° under TM polarization. Yet also has the characteristic of a narrow transition angular domain, where the widths of the transition angle domains on both sides, where 1dB ≤ | S 21 | ≤ ~ − 20dB, are both 2.6° under TE polarization, and 16° and 9.3° under TM polarization. Meanwhile, the proposed structure also exhibits angular selectivity with broadband characteristics that it maintains angular selectivity over a 4.1 GHz bandwidth from 17.6GHz to 21.7GHz under TE polarization, and the angular selectivity spans a 5.4 GHz bandwidth from 17.6GHz to 23GHz under TM polarization. Finally, a prototype of this structure was fabricated, and the actual measurement results are in good agreement with the simulation results. This paper is the first to propose the concept of broadband characteristics for ASS, and the structure integrates the three advantages of narrow-angle domain transition, ultra-narrow-angle domain transmission, and dual polarization. With superior angle-selective performance compared to existing solutions, this structure offers important application potential, especially for applications in the front end of telescope imaging systems, optical coupling in AR waveguides, enhancing the signal-to-noise ratio (SNR) of signal detection in optical communications, and offering privacy protection for transmitters.
- 7 April 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (8) , 13865
Dual-polarized angle-selective surface with ultra-narrow angular selectivity and broadband characteristics
This paper designs an angle-selective surface (ASS) composed of two identical layers of frequency-selective surfaces (FSS) with regular hexagonal structures. By leveraging the equivalent circuit model (ECM) theory and the modal interaction poles (MIPs) principle, the interlayer height is optimized to modulate electromagnetic coupling between layers, thereby achieving angular selectivity. The structure exhibits excellent ultra-narrow angular domain transmission characteristics, with the width of the transmission angle domain where | S 21 | > −1dB is less than 0.1° under TE polarization and only 0.7° under TM polarization. Yet also has the characteristic of a narrow transition angular domain, where the widths of the transition angle domains on both sides, where 1dB ≤ | S 21 | ≤ ~ − 20dB, are both 2.6° under TE polarization, and 16° and 9.3° under TM polarization. Meanwhile, the proposed structure also exhibits angular selectivity with broadband characteristics that it maintains angular selectivity over a 4.1 GHz bandwidth from 17.6GHz to 21.7GHz under TE polarization, and the angular selectivity spans a 5.4 GHz bandwidth from 17.6GHz to 23GHz under TM polarization. Finally, a prototype of this structure was fabricated, and the actual measurement results are in good agreement with the simulation results. This paper is the first to propose the concept of broadband characteristics for ASS, and the structure integrates the three advantages of narrow-angle domain transition, ultra-narrow-angle domain transmission, and dual polarization. With superior angle-selective performance compared to existing solutions, this structure offers important application potential, especially for applications in the front end of telescope imaging systems, optical coupling in AR waveguides, enhancing the signal-to-noise ratio (SNR) of signal detection in optical communications, and offering privacy protection for transmitters.
- 2 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (5) , 2005-2009
Design of Angle-Selective Surface With Multifrequency Angular Disparity and Sharp Roll-Off Transmission Characteristics
This letter proposes a design of angle-selective surface (ASS) with multi-frequency angular disparity and sharp roll-off transmission characteristics. The design is implemented using a single-layer frequency-selective surface (FSS), in which the upper angular bound increases continuously from 30${}^{\circ }$ to 82${}^{\circ }$ as the frequency decreases. An equivalent circuit model (ECM) is used to analyze the structure, revealing the variation of the circuit parameters at different incident angles. The simulated results demonstrate that, under TE polarization, the designed ASS exhibits passbands (${S_{21}} \geq -1 \rm{ dB}$) in the angle ranges of 0${}^{\circ }$-30${}^{\circ }$, 0${}^{\circ }$-44${}^{\circ }$, 0${}^{\circ }$-60${}^{\circ }$, and 0${}^{\circ }$-82${}^{\circ }$ at 8.4 GHz, 7.5 GHz, 6.8 GHz, and 6.3 GHz, respectively. The corresponding transition angle ranges are 12${}^{\circ }$, 16${}^{\circ }$, 20${}^{\circ }$, and 6${}^{\circ }$. Subsequently, a prototype of the ASS was fabricated and measured. The measured results exhibit excellent agreement with the simulated results, confirming the angular filtering characteristics of the designed ASS.
- 2 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (5) , 2005-2009
Design of Angle-Selective Surface With Multifrequency Angular Disparity and Sharp Roll-Off Transmission Characteristics
This letter proposes a design of angle-selective surface (ASS) with multi-frequency angular disparity and sharp roll-off transmission characteristics. The design is implemented using a single-layer frequency-selective surface (FSS), in which the upper angular bound increases continuously from 30${}^{\circ }$ to 82${}^{\circ }$ as the frequency decreases. An equivalent circuit model (ECM) is used to analyze the structure, revealing the variation of the circuit parameters at different incident angles. The simulated results demonstrate that, under TE polarization, the designed ASS exhibits passbands (${S_{21}} \geq -1 \rm{ dB}$) in the angle ranges of 0${}^{\circ }$-30${}^{\circ }$, 0${}^{\circ }$-44${}^{\circ }$, 0${}^{\circ }$-60${}^{\circ }$, and 0${}^{\circ }$-82${}^{\circ }$ at 8.4 GHz, 7.5 GHz, 6.8 GHz, and 6.3 GHz, respectively. The corresponding transition angle ranges are 12${}^{\circ }$, 16${}^{\circ }$, 20${}^{\circ }$, and 6${}^{\circ }$. Subsequently, a prototype of the ASS was fabricated and measured. The measured results exhibit excellent agreement with the simulated results, confirming the angular filtering characteristics of the designed ASS.
- 5 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (2) , 1225-1237
Analysis and Design of SIWC-Based AFSS With Polarization Selectivity and Three Independently Controllable Poles
In this article, an active frequency-selective surface (AFSS) based on substrate integrated waveguide cavity (SIWC) technology with polarization selectivity and three independently tunable poles is realized. First, a well-structured bias network is designed to accommodate three types of varactor diodes on the top layer and choke inductors on the bottom feeding layer. Second, the equivalent circuit model (ECM) guides the design of the fundamental unit cell, which is optimized in two key aspects. The transmission performance is enhanced by introducing the convolutional fractal structure, and the electromagnetic (EM) isolation is improved by incorporating an SIWC-based configuration. Simulation results demonstrate that under TE polarization, the AFSS enables independent tuning of all three passbands across a 0°–60° incidence range. Under TM polarization, similar tunability is maintained with higher passband frequencies, demonstrating strong polarization selectivity. Finally, an engineering-oriented design of the bias network is developed and a prototype controlled by three independent direct current (dc) sources is fabricated. The measurements show good agreement with simulations. This design achieves tri-band independent tuning while maintaining excellent miniaturization and angular stability. Moreover, it also integrates polarization-selective characteristics, making it highly suitable for complex EM environments that require stealth, communication, or multiband, multipolarization compatibility.
- 5 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (2) , 1225-1237
Analysis and Design of SIWC-Based AFSS With Polarization Selectivity and Three Independently Controllable Poles
In this article, an active frequency-selective surface (AFSS) based on substrate integrated waveguide cavity (SIWC) technology with polarization selectivity and three independently tunable poles is realized. First, a well-structured bias network is designed to accommodate three types of varactor diodes on the top layer and choke inductors on the bottom feeding layer. Second, the equivalent circuit model (ECM) guides the design of the fundamental unit cell, which is optimized in two key aspects. The transmission performance is enhanced by introducing the convolutional fractal structure, and the electromagnetic (EM) isolation is improved by incorporating an SIWC-based configuration. Simulation results demonstrate that under TE polarization, the AFSS enables independent tuning of all three passbands across a 0°–60° incidence range. Under TM polarization, similar tunability is maintained with higher passband frequencies, demonstrating strong polarization selectivity. Finally, an engineering-oriented design of the bias network is developed and a prototype controlled by three independent direct current (dc) sources is fabricated. The measurements show good agreement with simulations. This design achieves tri-band independent tuning while maintaining excellent miniaturization and angular stability. Moreover, it also integrates polarization-selective characteristics, making it highly suitable for complex EM environments that require stealth, communication, or multiband, multipolarization compatibility.
- 25 July 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (15) , 32862-32880
Design of a multi-passband metasurface with ultra-high angular stability based on complementary frequency selective surfaces
This paper proposes a new design of a multi-passband metasurface with ultra-high angular stability based on complementary frequency selective surfaces (FSSs). The proposed design consists of multiple ring slots coupled with a complementary structure on the opposite side of a single substrate layer. This approach effectively enables the design of multiband band-pass FSSs, ranging from dual-passband to penta-passband, using a simplified design process and achieving an ultra-low thickness of 0.004λ. The equivalent circuit model (ECM) is utilized to analyze the proposed structure, revealing the influence of the number of cascaded ring patch layers on the number of passbands. To demonstrate the validity of our method, a penta-band FSS is synthesized to achieve a signal transmission with an insertion loss less than 1.0 dB at the passband frequency existing between two adjacent reflection bands. The penta-band FSS was fabricated and measured to verify our design concept. The experimental results show excellent agreement with the simulation results. The resultant FSS exhibits polarization insensitivity and maintains a highly stable filter response at incidence angles up to 80∘.
- 25 July 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (15) , 32862-32880
Design of a multi-passband metasurface with ultra-high angular stability based on complementary frequency selective surfaces
This paper proposes a new design of a multi-passband metasurface with ultra-high angular stability based on complementary frequency selective surfaces (FSSs). The proposed design consists of multiple ring slots coupled with a complementary structure on the opposite side of a single substrate layer. This approach effectively enables the design of multiband band-pass FSSs, ranging from dual-passband to penta-passband, using a simplified design process and achieving an ultra-low thickness of 0.004λ. The equivalent circuit model (ECM) is utilized to analyze the proposed structure, revealing the influence of the number of cascaded ring patch layers on the number of passbands. To demonstrate the validity of our method, a penta-band FSS is synthesized to achieve a signal transmission with an insertion loss less than 1.0 dB at the passband frequency existing between two adjacent reflection bands. The penta-band FSS was fabricated and measured to verify our design concept. The experimental results show excellent agreement with the simulation results. The resultant FSS exhibits polarization insensitivity and maintains a highly stable filter response at incidence angles up to 80∘.
- Open Access
- 9 June 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (23)
Dual-polarized dual-band angle-selective surface based on double-layer FSS
This Letter presents a dual-polarized, dual-band angle-selective surface structure based on a double-layer frequency selective surface (FSS), composed of two identical slotted FSS layers. Both FSS layers consist of a metal layer and a dielectric substrate, and they are separated by an air gap. The proposed structure enables distinct angle-selective transmission at two frequency bands while maintaining polarization insensitivity for both TE and TM modes. Specifically, at 8.5 GHz, electromagnetic waves incident within the angular range of 0°–9° exhibit excellent transmission performance (S21 > −1 dB), whereas at 9.6 GHz, the transmission angle is confined to angles between 30° and 31°. Furthermore, the unit cell size and overall thickness of the structure remain relatively compact. To provide theoretical insight, an equivalent circuit model is employed for analysis, and a prototype is fabricated for experimental validation. The measured results demonstrate strong agreement with the simulated results, confirming the effectiveness of the proposed design. When the target signal and the interference signal reside within the same frequency band, the proposed structure efficiently mitigates electromagnetic interference.
- 9 June 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (23)
Open AccessDual-polarized dual-band angle-selective surface based on double-layer FSS
This Letter presents a dual-polarized, dual-band angle-selective surface structure based on a double-layer frequency selective surface (FSS), composed of two identical slotted FSS layers. Both FSS layers consist of a metal layer and a dielectric substrate, and they are separated by an air gap. The proposed structure enables distinct angle-selective transmission at two frequency bands while maintaining polarization insensitivity for both TE and TM modes. Specifically, at 8.5 GHz, electromagnetic waves incident within the angular range of 0°–9° exhibit excellent transmission performance (S21 > −1 dB), whereas at 9.6 GHz, the transmission angle is confined to angles between 30° and 31°. Furthermore, the unit cell size and overall thickness of the structure remain relatively compact. To provide theoretical insight, an equivalent circuit model is employed for analysis, and a prototype is fabricated for experimental validation. The measured results demonstrate strong agreement with the simulated results, confirming the effectiveness of the proposed design. When the target signal and the interference signal reside within the same frequency band, the proposed structure efficiently mitigates electromagnetic interference.
- 9 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. PP (15361225) , 1-5
Design of a Dual-Passband Frequency-Selective Rasorber With High Selectivity
A dual-passband frequency-selective rasorber (FSR) with high selectivity is proposed in this letter. By analyzing the equivalent circuit model (ECM), the design approach improving the selectivity of the dual-passband is introduced. The FSR is formed by a lossy layer and two frequency-selective surface (FSS) layers. The lossy layer is composed of two parallel resonance units embedded in a rhombic patch, which is connected with four resistors loaded on the T-shape metal strips. The lossless layer consists of two layers of double square slots to provide highly selective passbands with second-order response. The simulated results show that two transmission bands are achieved at 7.2 and 10.8 GHz with the insertion loss of 0.86 and 0.57 dB, and the fractional bandwidth for |S11| < −10 dB is 94.8%. Both sides of the transmission bands exhibit steep roll-off characteristics, with the coefficient of steep drop (CSD) being 41.18, 77.78, 31.82 and 17.5, respectively. The unit cell size is 0.18λ × 0.18λ × 0.19λ (λ is the wavelength at the lowest operating frequency). A prototype of the proposed FSR was fabricated and measured, the measured results are consistent with the simulation results
- 9 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. PP (15361225) , 1-5
Design of a Dual-Passband Frequency-Selective Rasorber With High Selectivity
A dual-passband frequency-selective rasorber (FSR) with high selectivity is proposed in this letter. By analyzing the equivalent circuit model (ECM), the design approach improving the selectivity of the dual-passband is introduced. The FSR is formed by a lossy layer and two frequency-selective surface (FSS) layers. The lossy layer is composed of two parallel resonance units embedded in a rhombic patch, which is connected with four resistors loaded on the T-shape metal strips. The lossless layer consists of two layers of double square slots to provide highly selective passbands with second-order response. The simulated results show that two transmission bands are achieved at 7.2 and 10.8 GHz with the insertion loss of 0.86 and 0.57 dB, and the fractional bandwidth for |S11| < −10 dB is 94.8%. Both sides of the transmission bands exhibit steep roll-off characteristics, with the coefficient of steep drop (CSD) being 41.18, 77.78, 31.82 and 17.5, respectively. The unit cell size is 0.18λ × 0.18λ × 0.19λ (λ is the wavelength at the lowest operating frequency). A prototype of the proposed FSR was fabricated and measured, the measured results are consistent with the simulation results
- Open Access
- 13 January 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (2)
Design of miniaturized and polarization insensitive frequency selective surface filter with large band ratio
In this paper, a miniaturized and polarization insensitive frequency selective surface filter with large band ratio (BR) is presented. This structure consists of one metal layer and two dielectric layers. The metal layer includes two parts, with the outer square loop providing a lower frequency stopband and the inner pattern providing a higher frequency stopband. The structure has excellent miniaturization characteristics, in particular, the unit size is only 0.054λ0 and the thickness is only 0.014λ0, where λ0 is the wavelength corresponding to the first resonant frequency. Additionally, there is only one layer of metal layer, which greatly reduces the processing complexity and cost. The measurement results show that for TE and TM polarization, the center frequencies of the two stop bands are 2.03 and 18.98 GHz corresponding to a BR of 9.35. It can be used as a spatial dual frequency filter with large frequency band separation. In addition, the proposed structure also possesses advantages such as wideband response, polarization insensitivity, and high angle stability. The simulation results are in good agreement with the measured results.
- 13 January 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (2)
Open AccessDesign of miniaturized and polarization insensitive frequency selective surface filter with large band ratio
In this paper, a miniaturized and polarization insensitive frequency selective surface filter with large band ratio (BR) is presented. This structure consists of one metal layer and two dielectric layers. The metal layer includes two parts, with the outer square loop providing a lower frequency stopband and the inner pattern providing a higher frequency stopband. The structure has excellent miniaturization characteristics, in particular, the unit size is only 0.054λ0 and the thickness is only 0.014λ0, where λ0 is the wavelength corresponding to the first resonant frequency. Additionally, there is only one layer of metal layer, which greatly reduces the processing complexity and cost. The measurement results show that for TE and TM polarization, the center frequencies of the two stop bands are 2.03 and 18.98 GHz corresponding to a BR of 9.35. It can be used as a spatial dual frequency filter with large frequency band separation. In addition, the proposed structure also possesses advantages such as wideband response, polarization insensitivity, and high angle stability. The simulation results are in good agreement with the measured results.