A. Zakharov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
A. Zakharov has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Evgeniia M. Khairullina
Institute of Automation and Control Processes, Far Eastern Branch, Russian Academy of Sciences, 5 Radio St., Vladivostok 690041, Russia
5 shared publications - Alexander Shmalko
Institute of Chemistry, St. Petersburg State University, St. Petersburg, Russia
4 shared publications - Aleksandra Levshakova
Institute of Chemistry, St. Petersburg State University, St. Petersburg, Russia
3 shared publications - Alina Anvyarovna Manshina
St. Petersburg State University, St. Petersburg, Russia
3 shared publications - Maria Vitalyevna Kaneva
Institute of Chemistry, St. Petersburg State University, St. Petersburg, Russia
3 shared publications - Dmitrii M. Nikolaev
Institute of chemistry, Saint Petersburg State University, 7/9 Universitetskaya Emb., Saint Petersburg 199034, Russia
2 shared publications
Latest Publications
- Open Access
Laser-Induced Fabrication of Binder-Free Hierarchical Ru-Ir Bimetallic Microstructures for Sensitive Dual-Range Non-Enzymatic Glucose Detection
Developing efficient, non-enzymatic glucose sensors is crucial for overcoming the stability and environmental limitations of conventional enzymatic devices. In this work, a series of ruthenium-based bimetallic microstructures (Ru–Ir, Ru–Pt, Ru–Au DMF, and Ru–Au NPs) were successfully fabricated on glass substrates using a mask-free, two-stage laser-induced chemical liquid-phase deposition (LCLD) technique. Among the prepared materials, the binder-free Ru–Ir electrode exhibited the highest electrocatalytic activity toward glucose oxidation in an alkaline medium. Characterization by SEM, EDX, and XRD revealed a highly developed hierarchical surface morphology with distinct metallic phases. Chronoamperometric measurements performed at an operating potential of 0.45 V (vs. Ag/AgCl) demonstrated that the Ru–Ir sensor possesses a dual-range linear calibration—0.5–3000 μM and 3000–12,500 μM—with sensitivities of 0.027 and 0.014 μA μM−1 cm−2, respectively. The limit of detection was determined to be 58.1 nM. This improved performance and dual-range linearity are highly likely attributed to the abundance of electroactive sites provided by the hierarchical architecture and a synergetic effect between Ru and Ir that accelerates surface-controlled glucose dehydrogenation. Furthermore, the Ru–Ir sensor demonstrated negligible cross-sensitivity toward common interferents, an electrode-to-electrode RSD of 2.33% (n = 5), and remarkable long-term stability, retaining over 85% of its initial response after 30 days. Overall, the two-stage LCLD procedure provides a mask-free, binder-free, and direct-write route for fabricating bimetallic electrodes under ambient conditions.
Open AccessLaser-Induced Fabrication of Binder-Free Hierarchical Ru-Ir Bimetallic Microstructures for Sensitive Dual-Range Non-Enzymatic Glucose Detection
Developing efficient, non-enzymatic glucose sensors is crucial for overcoming the stability and environmental limitations of conventional enzymatic devices. In this work, a series of ruthenium-based bimetallic microstructures (Ru–Ir, Ru–Pt, Ru–Au DMF, and Ru–Au NPs) were successfully fabricated on glass substrates using a mask-free, two-stage laser-induced chemical liquid-phase deposition (LCLD) technique. Among the prepared materials, the binder-free Ru–Ir electrode exhibited the highest electrocatalytic activity toward glucose oxidation in an alkaline medium. Characterization by SEM, EDX, and XRD revealed a highly developed hierarchical surface morphology with distinct metallic phases. Chronoamperometric measurements performed at an operating potential of 0.45 V (vs. Ag/AgCl) demonstrated that the Ru–Ir sensor possesses a dual-range linear calibration—0.5–3000 μM and 3000–12,500 μM—with sensitivities of 0.027 and 0.014 μA μM−1 cm−2, respectively. The limit of detection was determined to be 58.1 nM. This improved performance and dual-range linearity are highly likely attributed to the abundance of electroactive sites provided by the hierarchical architecture and a synergetic effect between Ru and Ir that accelerates surface-controlled glucose dehydrogenation. Furthermore, the Ru–Ir sensor demonstrated negligible cross-sensitivity toward common interferents, an electrode-to-electrode RSD of 2.33% (n = 5), and remarkable long-term stability, retaining over 85% of its initial response after 30 days. Overall, the two-stage LCLD procedure provides a mask-free, binder-free, and direct-write route for fabricating bimetallic electrodes under ambient conditions.
- 1 December 2024
- Published by Pleiades Publishing Ltd in Bulletin of the Russian Academy of Sciences: Physics
- Vol. 88 (S3) , S461-S466
Direct Laser Synthesis of Flexible Plasmonic Sensors for SERS and Self-Powered Nanosensors
This study presents the successful synthesis of plasmonic silver nanoparticles (Ag NPs) using laser-induced deposition (LID) on both rigid glass and flexible polydimethylsiloxane (PDMS) substrates. The resulting nanostructures are characterized using scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) analysis, demonstrating uniform arrays of Ag nanoparticles with high deposition density and particle sizes ranging from 40 to 90 nm. Silver nanoparticles deposited on PDMS exhibit strong adhesion and maintain structural integrity under mechanical deformations, such as bending and stretching, making them ideal for flexible sensor applications. Surface-enhanced Raman spectroscopy (SERS) measurements using Rhodamine 6G (R6G) as a model analyte reveal that silver nanostructures on PDMS produce a signal comparable to those on glass, with a detection limit of 10–8 g/L for R6G. This study highlights the potential of PDMS as a flexible substrate for SERS-active sensors in biomedical and environmental applications, providing a scalable and efficient approach for detecting analytes, including disease markers and toxic substances.
- 1 December 2024
- Published by Pleiades Publishing Ltd in Bulletin of the Russian Academy of Sciences: Physics
- Vol. 88 (S3) , S461-S466
Direct Laser Synthesis of Flexible Plasmonic Sensors for SERS and Self-Powered Nanosensors
This study presents the successful synthesis of plasmonic silver nanoparticles (Ag NPs) using laser-induced deposition (LID) on both rigid glass and flexible polydimethylsiloxane (PDMS) substrates. The resulting nanostructures are characterized using scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) analysis, demonstrating uniform arrays of Ag nanoparticles with high deposition density and particle sizes ranging from 40 to 90 nm. Silver nanoparticles deposited on PDMS exhibit strong adhesion and maintain structural integrity under mechanical deformations, such as bending and stretching, making them ideal for flexible sensor applications. Surface-enhanced Raman spectroscopy (SERS) measurements using Rhodamine 6G (R6G) as a model analyte reveal that silver nanostructures on PDMS produce a signal comparable to those on glass, with a detection limit of 10–8 g/L for R6G. This study highlights the potential of PDMS as a flexible substrate for SERS-active sensors in biomedical and environmental applications, providing a scalable and efficient approach for detecting analytes, including disease markers and toxic substances.
- 1 December 2024
- Published by Pleiades Publishing Ltd in Bulletin of the Russian Academy of Sciences: Physics
- Vol. 88 (S3) , S352-S356
Flexible Copper-Based Electrode Modified with Zinc Hexacyanoferrate as Cathode for Hybrid Supercapacitors
The integration of laser-assisted in-situ synthesis and successive ionic layer adsorption and reaction (SILAR) for the fabrication of supercapacitors on lightweight, flexible substrates is investigated. The focus was placed on the modification of laser-fabricated copper electrodes with zinc hexacyanoferrate (ZnHCF), a Prussian Blue analog known for its exceptional electrochemical properties. The electrochemical performance of the modified electrodes is characterized by cyclic voltammetry and charge-discharge tests, demonstrating the effectiveness of the ZnHCF modification in improving the charge transfer kinetics. The synthesized ZnHCF/Cu composite electrodes exhibit high specific capacitance of 182.3 mF/cm2 at a current density of 1 mA/cm2 and excellent cycling stability.
- 1 December 2024
- Published by Pleiades Publishing Ltd in Bulletin of the Russian Academy of Sciences: Physics
- Vol. 88 (S3) , S352-S356
Flexible Copper-Based Electrode Modified with Zinc Hexacyanoferrate as Cathode for Hybrid Supercapacitors
The integration of laser-assisted in-situ synthesis and successive ionic layer adsorption and reaction (SILAR) for the fabrication of supercapacitors on lightweight, flexible substrates is investigated. The focus was placed on the modification of laser-fabricated copper electrodes with zinc hexacyanoferrate (ZnHCF), a Prussian Blue analog known for its exceptional electrochemical properties. The electrochemical performance of the modified electrodes is characterized by cyclic voltammetry and charge-discharge tests, demonstrating the effectiveness of the ZnHCF modification in improving the charge transfer kinetics. The synthesized ZnHCF/Cu composite electrodes exhibit high specific capacitance of 182.3 mF/cm2 at a current density of 1 mA/cm2 and excellent cycling stability.
- 1 December 2024
- Published by Pleiades Publishing Ltd in Bulletin of the Russian Academy of Sciences: Physics
- Vol. 88 (S3) , S385-S389
Direct Laser Metallization from Deep Eutectic Solvents on Polymer Substrates
The task of local metallization of polymer substrates such as PDMS (polydimethylsiloxane) is a challenging and important task for the development of biocompatible flexible electronics. Here we present for the first time the possibility of using the Direct laser metallization (DLM) method for fabrication of copper conducting structures on PDMS. It has been shown that DLM method allows one to obtain conductive structures with low resistivity and a developed surface with minimal thermal impact on the substrate. By optimizing the scanning speed and laser power density, it was possible to minimize the thermal degradation of PDMS and ensure reliable metal adhesion. The DLM method opens up new opportunities for creating flexible electronics, providing precise and cost-effective deposition of copper conductors on flexible substrates.
- 1 December 2024
- Published by Pleiades Publishing Ltd in Bulletin of the Russian Academy of Sciences: Physics
- Vol. 88 (S3) , S385-S389
Direct Laser Metallization from Deep Eutectic Solvents on Polymer Substrates
The task of local metallization of polymer substrates such as PDMS (polydimethylsiloxane) is a challenging and important task for the development of biocompatible flexible electronics. Here we present for the first time the possibility of using the Direct laser metallization (DLM) method for fabrication of copper conducting structures on PDMS. It has been shown that DLM method allows one to obtain conductive structures with low resistivity and a developed surface with minimal thermal impact on the substrate. By optimizing the scanning speed and laser power density, it was possible to minimize the thermal degradation of PDMS and ensure reliable metal adhesion. The DLM method opens up new opportunities for creating flexible electronics, providing precise and cost-effective deposition of copper conductors on flexible substrates.
- Open Access
- 3 December 2022
- Published by MDPI AG in Chemosensors
- Vol. 10 (12) , 513
Au–Ru Composite for Enzyme-Free Epinephrine Sensing
We report the synthesis and investigation of Au–Ru composite with highly developed specific surface area exhibiting excellent electrocatalytic performance suitable for detection of such hydrophobic metabolites as epinephrine in the physiological environment. This electrode material was fabricated using two-stage laser-assisted metal deposition technique. The morphological and structural studies of Au–Ru were performed using methods of scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and X-ray diffraction spectroscopy (XRD). The voltammetric methods, including cyclic voltammetry (CV), differential pulse voltammetry (DPV) and direct amperometry, were used to analyze the composite’s electrochemical properties. The Au–Ru sensor exhibited two linear ranges of the non-enzymatic epinephrine detection: 0.01–10 μM and 10–1000 μM. The calculated sensitivities within these two ranges were 32.8 and 3.3 μA μM cm, whereas the corresponding limits of detection were 9 and 20 nM, respectively. The Au–Ru sensor also revealed good stability and reproducibility, as well as high selectivity towards epinephrine detection in the presence of a number of the interfering species.- 3 December 2022
- Published by MDPI AG in Chemosensors
- Vol. 10 (12) , 513
Open AccessAu–Ru Composite for Enzyme-Free Epinephrine Sensing
We report the synthesis and investigation of Au–Ru composite with highly developed specific surface area exhibiting excellent electrocatalytic performance suitable for detection of such hydrophobic metabolites as epinephrine in the physiological environment. This electrode material was fabricated using two-stage laser-assisted metal deposition technique. The morphological and structural studies of Au–Ru were performed using methods of scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and X-ray diffraction spectroscopy (XRD). The voltammetric methods, including cyclic voltammetry (CV), differential pulse voltammetry (DPV) and direct amperometry, were used to analyze the composite’s electrochemical properties. The Au–Ru sensor exhibited two linear ranges of the non-enzymatic epinephrine detection: 0.01–10 μM and 10–1000 μM. The calculated sensitivities within these two ranges were 32.8 and 3.3 μA μM cm, whereas the corresponding limits of detection were 9 and 20 nM, respectively. The Au–Ru sensor also revealed good stability and reproducibility, as well as high selectivity towards epinephrine detection in the presence of a number of the interfering species.