PLPaul Leroy

Paul Leroy

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Paul Leroy has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Reply on RC1

    by Ron Nativ, Dimitri Lague, Paul Leroy, Laure Guerit, Thomas Bernard, Mathilde Letard, Daniel Girardeau-Montaut, Vincent Godard, Rodolphe Cattin, Olivier Payrastre, et al.

    We present a comprehensive workflow for processing a large-scale airborne Topo-Bathymetric LiDAR (TBL) dataset acquired over the 28 km Ardèche River Gorges in France during October 2021. To address limited depth penetration, low signal-to-noise ratio, and complex topography, we integrate onboard discrete returns, a full-waveform (FWF) re-analysis, and an orthorectified full-waveform synthesis (OrthoFWF). Depth penetration, evaluated by D99 (99th percentile of retrieved water depth, D), increases from 2.88 m (discrete) to 3.70 m (FWF) and 4.48 m (OrthoFWF). Area coverage increases from 70.1 % to 79.5 % to 85.6 % of the submerged area with bathymetric data available, while the length-based coverage (the percentage of river length composed of reaches with ≥95 % bathymetric coverage) improves from 31.8 % to 54.7 % to 86.9 %. A new unsupervised classification method, using a kernel-density–derived intensity threshold, was applied to 1.3 million points, enhancing the separation of bed returns from noise within the OrthoFWF domain and improving depth extraction. The workflow includes internal flight-line geometric correction, precision benchmarking against France’s national LiDAR HD dataset, bathymetric classification with a random-forest classifier, and a targeted supplementary sonar survey to constrain the deepest reaches. To produce the final Digital Elevation Model from incomplete coverage, we compare three interpolation approaches and demonstrate that Poisson surface reconstruction yields the most morphologically realistic surfaces, particularly when constrained by sonar-derived depths. This integrated workflow substantially improves the accuracy and completeness of river bathymetry, supporting high-fidelity hydrodynamic modeling and advancing TBL applications in fluvial geomorphology.

  • Open Access

    Reply on RC2

    by Ron Nativ, Dimitri Lague, Paul Leroy, Laure Guerit, Thomas Bernard, Mathilde Letard, Daniel Girardeau-Montaut, Vincent Godard, Rodolphe Cattin, Olivier Payrastre, et al.

    We present a comprehensive workflow for processing a large-scale airborne Topo-Bathymetric LiDAR (TBL) dataset acquired over the 28 km Ardèche River Gorges in France during October 2021. To address limited depth penetration, low signal-to-noise ratio, and complex topography, we integrate onboard discrete returns, a full-waveform (FWF) re-analysis, and an orthorectified full-waveform synthesis (OrthoFWF). Depth penetration, evaluated by D99 (99th percentile of retrieved water depth, D), increases from 2.88 m (discrete) to 3.70 m (FWF) and 4.48 m (OrthoFWF). Area coverage increases from 70.1 % to 79.5 % to 85.6 % of the submerged area with bathymetric data available, while the length-based coverage (the percentage of river length composed of reaches with ≥95 % bathymetric coverage) improves from 31.8 % to 54.7 % to 86.9 %. A new unsupervised classification method, using a kernel-density–derived intensity threshold, was applied to 1.3 million points, enhancing the separation of bed returns from noise within the OrthoFWF domain and improving depth extraction. The workflow includes internal flight-line geometric correction, precision benchmarking against France’s national LiDAR HD dataset, bathymetric classification with a random-forest classifier, and a targeted supplementary sonar survey to constrain the deepest reaches. To produce the final Digital Elevation Model from incomplete coverage, we compare three interpolation approaches and demonstrate that Poisson surface reconstruction yields the most morphologically realistic surfaces, particularly when constrained by sonar-derived depths. This integrated workflow substantially improves the accuracy and completeness of river bathymetry, supporting high-fidelity hydrodynamic modeling and advancing TBL applications in fluvial geomorphology.

  • Open Access

    Time-Adaptive Change Analysis through Extension of the M3C2 Algorithm using Multi-Modal Laser Scanning Data in a Salt Marsh Environment

    by Xiaoyu Huang, Mathilde Letard, Dimitri Lague, Bernhard Höfle, Ronald Tabernig, Paul Leroy, Katharina Anders

    Quantifying topographic dynamics from 3D time series is essential for a broad range of geoscientific applications. However, data acquired by laser scanning often vary between epochs, e.g. in point density and coverage. These heterogeneities present a challenge for change detection, particularly across multi-temporal and multi-modal data. We propose a new approach that enhances the analysis of spatiotemporally irregular point clouds, particularly when the sampling frequency exceeds the analysis time scale. In particular, our method extends the Multiscale Model to Model Cloud Comparison (M3C2) algorithm through adaptive temporal aggregation. Driven by a local point density requirement, our method employs both a spatial neighborhood (as in standard M3C2) and a temporal neighborhood for each core point within the point cloud time series. If the neighborhood of a core point is too sparse for surface estimation, an iterative temporal search incorporates data from adjacent epochs until either the density requirement or a maximum temporal window is reached. This adaptive process ensures sufficient local point density while preventing globally fixed temporal aggregation. We evaluate our method on a multi-modal laser scanning dataset from Mont-Saint-Michel Bay, France, comprising 38 epochs spanning a decade at daily to seasonal intervals. Results demonstrate that our method increases change detection completeness by more than 13% compared to standard M3C2 and increases accuracy by 31% compared to commonly used fixed-window averaging. Our approach thereby enhances 3D change detection in complex real-world 4D datasets, enabling higher accuracy and completeness in the analysis of surface dynamics at variable spatiotemporal scales.

  • Open Access

    Comment on egusphere-2026-724

    by Ron Nativ, Dimitri Lague, Paul Leroy, Laure Guerit, Thomas Bernard, Mathilde Letard, Daniel Girardeau-Montaut, Vincent Godard, Rodolphe Cattin, Olivier Payrastre, et al.

    We present a comprehensive workflow for processing a large-scale airborne Topo-Bathymetric LiDAR (TBL) dataset acquired over the 28 km Ardèche River Gorges in France during October 2021. To address limited depth penetration, low signal-to-noise ratio, and complex topography, we integrate onboard discrete returns, a full-waveform (FWF) re-analysis, and an orthorectified full-waveform synthesis (OrthoFWF). Depth penetration, evaluated by D99 (99th percentile of retrieved water depth, D), increases from 2.88 m (discrete) to 3.70 m (FWF) and 4.48 m (OrthoFWF). Area coverage increases from 70.1 % to 79.5 % to 85.6 % of the submerged area with bathymetric data available, while the length-based coverage (the percentage of river length composed of reaches with ≥95 % bathymetric coverage) improves from 31.8 % to 54.7 % to 86.9 %. A new unsupervised classification method, using a kernel-density–derived intensity threshold, was applied to 1.3 million points, enhancing the separation of bed returns from noise within the OrthoFWF domain and improving depth extraction. The workflow includes internal flight-line geometric correction, precision benchmarking against France’s national LiDAR HD dataset, bathymetric classification with a random-forest classifier, and a targeted supplementary sonar survey to constrain the deepest reaches. To produce the final Digital Elevation Model from incomplete coverage, we compare three interpolation approaches and demonstrate that Poisson surface reconstruction yields the most morphologically realistic surfaces, particularly when constrained by sonar-derived depths. This integrated workflow substantially improves the accuracy and completeness of river bathymetry, supporting high-fidelity hydrodynamic modeling and advancing TBL applications in fluvial geomorphology.

  • Open Access

    From point cloud to digital elevation model: Airborne topo-bathymetric LiDAR processing over the 28 km Ardèche River Gorges

    by Ron Nativ, Dimitri Lague, Paul Leroy, Laure Guerit, Thomas Bernard, Mathilde Letard, Daniel Girardeau-Montaut, Vincent Godard, Rodolphe Cattin, Olivier Payrastre, et al.

    We present a comprehensive workflow for processing a large-scale airborne Topo-Bathymetric LiDAR (TBL) dataset acquired over the 28 km Ardèche River Gorges in France during October 2021. To address limited depth penetration, low signal-to-noise ratio, and complex topography, we integrate onboard discrete returns, a full-waveform (FWF) re-analysis, and an orthorectified full-waveform synthesis (OrthoFWF). Depth penetration, evaluated by D99 (99th percentile of retrieved water depth, D), increases from 2.88 m (discrete) to 3.70 m (FWF) and 4.48 m (OrthoFWF). Area coverage increases from 70.1 % to 79.5 % to 85.6 % of the submerged area with bathymetric data available, while the length-based coverage (the percentage of river length composed of reaches with ≥95 % bathymetric coverage) improves from 31.8 % to 54.7 % to 86.9 %. A new unsupervised classification method, using a kernel-density–derived intensity threshold, was applied to 1.3 million points, enhancing the separation of bed returns from noise within the OrthoFWF domain and improving depth extraction. The workflow includes internal flight-line geometric correction, precision benchmarking against France’s national LiDAR HD dataset, bathymetric classification with a random-forest classifier, and a targeted supplementary sonar survey to constrain the deepest reaches. To produce the final Digital Elevation Model from incomplete coverage, we compare three interpolation approaches and demonstrate that Poisson surface reconstruction yields the most morphologically realistic surfaces, particularly when constrained by sonar-derived depths. This integrated workflow substantially improves the accuracy and completeness of river bathymetry, supporting high-fidelity hydrodynamic modeling and advancing TBL applications in fluvial geomorphology.

  • Open Access

    Supplementary material to "From point cloud to digital elevation model: Airborne topo-bathymetric LiDAR processing over the 28 km Ardèche River Gorges"

    by Ron Nativ, Dimitri Lague, Paul Leroy, Laure Guerit, Thomas Bernard, Mathilde Letard, Daniel Girardeau-Montaut, Vincent Godard, Rodolphe Cattin, Olivier Payrastre, et al.

  • Open Access

    New experiments to probe the role of fractures in bedrock on river erosion rate and processes

    by Marion Fournereau, Laure Guerit, Philippe Steer, Jean-Jacques Kermarrec, Paul Leroy, Christophe Lanos, Hélène Hivert, Claire Astrié, Dimitri Lague

    River erosion is a fundamental process that impacts, among others, mountain landscape evolution. Mountain rock lithologies often exhibit bedding, joints, and fractures that are thought to alter the incision efficiency of rivers compared to intact, massive rocks. The presence of close enough planar mechanical discontinuities allows the creation and entrainment of large blocks through plucking, a process that adds to abrasion, and potentially macroabrasion, by the transported sediment. Despite preliminary attempts to include shallow fracturing in theoretical models of bedrock incision and a couple of studies that quantified the relative importance of abrasion and plucking processes in situ, we are still lacking ways to systematically probe the role of fractures on bedrock erosion rates and processes. Due to the complex interactions at play, here we investigate this question via an experimental approach, using a new erosion mill designed to erode a fractured concrete disk with a diameter of 17 cm. We simulate vertical or dipping fractures by embedding a 3D-printed plastic mesh in the concrete, using BVOH – a plastic that softens in cold water – creating mechanical weaknesses with a controlled pattern. We explore 10 different geometries and run 4 additional experiments without fractures for control. We record the topographic evolution every 2 min by photogrammetry and derive erosion maps by measuring elevation changes between successive scans. Our results show that fractures influence the morphodynamical evolution of the disks and the relative contributions of abrasion and plucking. However, abrasion systematically remains the dominant erosion mechanism, with plucking contributing at most to 29 % of the total erosion for vertical fractures spaced by 20×20 mm2, 40 % for one specific dip angle (67°), and less than 10 % for most experiments. Average erosion rates show a modest (20 %) increase with the fraction of plucking, but do not show a clear relationship with fracture density and the presence of fractures. We suggest that the rate of erosion by plucking is limited by the depth and slow rate of horizontal fracture propagation between pre-existing vertical fractures, such that in our experimental setup, abrasion is systematically a dominant component. These findings emphasize the critical role of block preparation and loosening for plucking to be an effective process compared to abrasion. This new setup allows abrasion, macroabrasion, and plucking driven by bedload impacts to be studied in controlled situations, albeit with the well-known limits of abrasion mills and without the variety of natural processes that can drive fracture propagation. Further experiments should expand the parameter space of the erosion efficiency problem (i.e., sediment mass, grain size, flow velocity, intact rock mass strength, 3D fracture patterns) to help in developing mechanistic models applicable in natural environments.

  • Open Access

    Comment on egusphere-2025-1541

    by Marion Fournereau, Laure Guerit, Philippe Steer, Jean-Jacques Kermarrec, Paul Leroy, Christophe Lanos, Hélène Hivert, Claire Astrié, Dimitri Lague

    River erosion via abrasion and plucking is a fundamental process that impacts, among others, landscape evolution, sediment transport, and hillslope dynamics. It results from complex interactions between climate, tectonics, topography and the erodibility of bedrock. Despite its significant role, bedrock erodibility remains poorly understood as it is thought to aggregate several parameters. Among these, fractures in bedrock are assumed to exert a strong control over erosion and thus, on landscape evolution. However, there is no systematic study of the impact of fracture geometry and density on bedrock river erosion. Due to the complex interactions at play, we investigate this question via an experimental approach. We develop an erosion mill apparatus designed to erode a fractured concrete disk with a diameter of 17 cm. We simulate fractures by embedding a 3D-printed plastic mesh in the concrete, using BVOH—a plastic that softens in cold water—creating mechanical heterogeneities with a controlled pattern. We explore 10 different geometries and run 4 additional experiments without fractures for control. We record the topographic evolution every 2 minutes by photogrammetry and derive erosion maps by measuring elevation changes between successive scans. To our knowledge, this is the first study of its kind. Our results show that while fractures influence the relative contributions of abrasion and plucking, no clear relationship emerges between average erosion rates and fracture density or dip angle. However, we observe that the occurrence of plucking is related to the density and the dip angles of fractures, and is favoured by intermediate density that scales with the size of the impactors, and intermediate dip angle that ease the removal of blocks. We suggest that the main impact of plucking is to change the location of erosion, increasing the eroded surface area rather than accelerating overall erosion rates. However, but as plucking accounts for at most one-third of the total erosion, its occurrence does not significantly affect average erosion rates. These findings emphasize the role of fractures on erosion mode and location rather than erosion rates, and highlight the need to further explore the impact of fractures on riverbed erosion.

  • Open Access

    Comment on egusphere-2025-1541

    by Marion Fournereau, Laure Guerit, Philippe Steer, Jean-Jacques Kermarrec, Paul Leroy, Christophe Lanos, Hélène Hivert, Claire Astrié, Dimitri Lague

    River erosion via abrasion and plucking is a fundamental process that impacts, among others, landscape evolution, sediment transport, and hillslope dynamics. It results from complex interactions between climate, tectonics, topography and the erodibility of bedrock. Despite its significant role, bedrock erodibility remains poorly understood as it is thought to aggregate several parameters. Among these, fractures in bedrock are assumed to exert a strong control over erosion and thus, on landscape evolution. However, there is no systematic study of the impact of fracture geometry and density on bedrock river erosion. Due to the complex interactions at play, we investigate this question via an experimental approach. We develop an erosion mill apparatus designed to erode a fractured concrete disk with a diameter of 17 cm. We simulate fractures by embedding a 3D-printed plastic mesh in the concrete, using BVOH—a plastic that softens in cold water—creating mechanical heterogeneities with a controlled pattern. We explore 10 different geometries and run 4 additional experiments without fractures for control. We record the topographic evolution every 2 minutes by photogrammetry and derive erosion maps by measuring elevation changes between successive scans. To our knowledge, this is the first study of its kind. Our results show that while fractures influence the relative contributions of abrasion and plucking, no clear relationship emerges between average erosion rates and fracture density or dip angle. However, we observe that the occurrence of plucking is related to the density and the dip angles of fractures, and is favoured by intermediate density that scales with the size of the impactors, and intermediate dip angle that ease the removal of blocks. We suggest that the main impact of plucking is to change the location of erosion, increasing the eroded surface area rather than accelerating overall erosion rates. However, but as plucking accounts for at most one-third of the total erosion, its occurrence does not significantly affect average erosion rates. These findings emphasize the role of fractures on erosion mode and location rather than erosion rates, and highlight the need to further explore the impact of fractures on riverbed erosion.

  • Open Access

    Supplementary material to "New experiments to probe the role of fractures in bedrock on river erosion rate and processes"

    by Marion Fournereau, Laure Guerit, Philippe Steer, Jean-Jacques Kermarrec, Paul Leroy, Christophe Lanos, Hélène Hivert, Claire Astrié, Dimitri Lague