Tuo Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tuo Zhang has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Chengyang Li
College of Mechanics and Engineering Science, Hohai University, Nanjing 211100, China
3 shared publications - Jinhai Zhao
College of Mechanics and Engineering Science, Hohai University, Nanjing 211100, China
3 shared publications - Renfei Kuang
College of Mechanics and Engineering Science, Hohai University, Nanjing 211100, China
3 shared publications - Dongju Jiang
College of Mechanics and Engineering Sciences, Hohai University, Nanjing 211100, China
1 shared publication
Latest Publications
- Open Access
- 21 March 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (4) , 629
Research on Parameter Influence of Offshore Wind Turbines Based on Measured Data Analysis
Offshore wind turbines are prone to structural damage over time due to environmental factors, which increases operational costs and the risk of accidents. Early detection of structural damage through monitoring systems can help reduce maintenance costs. However, under complex external conditions and varying structural parameters, existing methods struggle to accurately and quickly detect damage. Understanding the factors that influence structural health is critical for effective long-term monitoring, as these factors directly affect the accuracy and timeliness of damage identification. This study comprehensively analyzed 5 MW offshore wind turbine measurement data, including constructing a digital twin model, establishing a surrogate model, and performing a sensitivity analysis. For monopile-based turbines, sensors in x and y directions were installed at four heights on the pile foundation and tower. Via Bayesian optimization, the finite element model’s structural parameters were updated to align its modal parameters with sensor data analysis results. The update efficiencies of different objective functions and the impacts of neural network hyperparameters on the surrogate model were examined. The sensitivity of the turbine’s structural parameters to modal parameters was studied. The results showed that the modal flexibility matrix is more effective in iteration. A 128-neuron, double-hidden-layer neural network balanced computational efficiency and accuracy well in the surrogate model for modal analysis. Flange damage and soil degradation near the pile mainly impacted the turbine’s health.
- 21 March 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (4) , 629
Open AccessResearch on Parameter Influence of Offshore Wind Turbines Based on Measured Data Analysis
Offshore wind turbines are prone to structural damage over time due to environmental factors, which increases operational costs and the risk of accidents. Early detection of structural damage through monitoring systems can help reduce maintenance costs. However, under complex external conditions and varying structural parameters, existing methods struggle to accurately and quickly detect damage. Understanding the factors that influence structural health is critical for effective long-term monitoring, as these factors directly affect the accuracy and timeliness of damage identification. This study comprehensively analyzed 5 MW offshore wind turbine measurement data, including constructing a digital twin model, establishing a surrogate model, and performing a sensitivity analysis. For monopile-based turbines, sensors in x and y directions were installed at four heights on the pile foundation and tower. Via Bayesian optimization, the finite element model’s structural parameters were updated to align its modal parameters with sensor data analysis results. The update efficiencies of different objective functions and the impacts of neural network hyperparameters on the surrogate model were examined. The sensitivity of the turbine’s structural parameters to modal parameters was studied. The results showed that the modal flexibility matrix is more effective in iteration. A 128-neuron, double-hidden-layer neural network balanced computational efficiency and accuracy well in the surrogate model for modal analysis. Flange damage and soil degradation near the pile mainly impacted the turbine’s health.
- Open Access
Stability Analysis and Support Optimization of Tunnel Surrounding Rock with Weak Interlayer Based on Catastrophe Theory
A tunnel excavation model with weak interlayers is established to analyze the effect of different angles and thicknesses on the displacement of the surrounding rock. Based on catastrophe theory, a stability criterion for surrounding rock displacement is derived, providing a theoretical framework for evaluating tunnel stability through numerical simulations. Finally, to minimize support construction costs, an optimization model is established by integrating the Particle Swarm Optimization (PSO) algorithm and the Radial Basis Function (RBF) neural network. The model is then validated through engineering projects. The results show that the deformation and stability of the surrounding rock are affected by the interlayer angle and thickness. As the angle increases, the maximum deformation of the surrounding rock gradually transitions from horizontal displacement to vertical displacement, while increased thickness amplifies deformation and concentrates it at the interlayer. The stability of the surrounding rock exhibits catastrophic characteristics, with instability often occurring in the middle and rear sections of the tunnel. Calculation costs are reduced by 88% using the PSO-RBF optimization model, and construction costs decreased by 34.96% after optimizing the support parameters. This study provides theoretical support for the stability analysis and construction optimization of tunnels with weak interlayers.
Open AccessStability Analysis and Support Optimization of Tunnel Surrounding Rock with Weak Interlayer Based on Catastrophe Theory
A tunnel excavation model with weak interlayers is established to analyze the effect of different angles and thicknesses on the displacement of the surrounding rock. Based on catastrophe theory, a stability criterion for surrounding rock displacement is derived, providing a theoretical framework for evaluating tunnel stability through numerical simulations. Finally, to minimize support construction costs, an optimization model is established by integrating the Particle Swarm Optimization (PSO) algorithm and the Radial Basis Function (RBF) neural network. The model is then validated through engineering projects. The results show that the deformation and stability of the surrounding rock are affected by the interlayer angle and thickness. As the angle increases, the maximum deformation of the surrounding rock gradually transitions from horizontal displacement to vertical displacement, while increased thickness amplifies deformation and concentrates it at the interlayer. The stability of the surrounding rock exhibits catastrophic characteristics, with instability often occurring in the middle and rear sections of the tunnel. Calculation costs are reduced by 88% using the PSO-RBF optimization model, and construction costs decreased by 34.96% after optimizing the support parameters. This study provides theoretical support for the stability analysis and construction optimization of tunnels with weak interlayers.
- Open Access
Dynamic Responses and Crack Propagation of Rock with Crossed Viscoelastic Joints Under Blasting Loads
To investigate the propagation of stress waves in viscoelastic joints under blasting loads, and their impact on crack propagation and dynamic response in rock masses, a numerical model incorporating intersecting viscoelastic joints was developed using LS-DYNA. This study focuses on the influence of various joint geometric parameters, including thickness and angle, on stress wave propagation and damage patterns in rock. The Riedel–Hiermaier–Thoma (RHT) model was employed to simulate the dynamic behavior of rock, while the Poynting–Thomson model was used to describe the viscoelastic properties of the joint fillings. The simulation results provide detailed insights into the principal stress, displacement, and particle vibration velocity around the joints. Based on the stress wave propagation theory, the velocity transmission coefficients were calculated to quantify the attenuation of stress waves across the joints. The findings demonstrate that viscoelastic joint properties significantly affect the damage patterns in the rock mass. Specifically, the area of the crushed zone and the width of cracks on the blasting side are proportional to joint thickness, while crack propagation at the joint tips is governed by differences in principal stress. Moreover, the propagation of vibration velocity is notably weakened at the second joint, highlighting the critical role played by joint characteristics in stress wave dynamics. These results underscore the complex interaction between joint properties and stress wave behavior in rock masses, providing valuable insights for optimizing blasting designs and improving the safety of underground engineering projects.
Open AccessDynamic Responses and Crack Propagation of Rock with Crossed Viscoelastic Joints Under Blasting Loads
To investigate the propagation of stress waves in viscoelastic joints under blasting loads, and their impact on crack propagation and dynamic response in rock masses, a numerical model incorporating intersecting viscoelastic joints was developed using LS-DYNA. This study focuses on the influence of various joint geometric parameters, including thickness and angle, on stress wave propagation and damage patterns in rock. The Riedel–Hiermaier–Thoma (RHT) model was employed to simulate the dynamic behavior of rock, while the Poynting–Thomson model was used to describe the viscoelastic properties of the joint fillings. The simulation results provide detailed insights into the principal stress, displacement, and particle vibration velocity around the joints. Based on the stress wave propagation theory, the velocity transmission coefficients were calculated to quantify the attenuation of stress waves across the joints. The findings demonstrate that viscoelastic joint properties significantly affect the damage patterns in the rock mass. Specifically, the area of the crushed zone and the width of cracks on the blasting side are proportional to joint thickness, while crack propagation at the joint tips is governed by differences in principal stress. Moreover, the propagation of vibration velocity is notably weakened at the second joint, highlighting the critical role played by joint characteristics in stress wave dynamics. These results underscore the complex interaction between joint properties and stress wave behavior in rock masses, providing valuable insights for optimizing blasting designs and improving the safety of underground engineering projects.