Snežana Jovanović
Research Subjects
Latest Publications
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. 3. Section,p. 121-126
Practical approaches to quality testing of pioneer machines
Pioneer machines, such as diggers, are particularly challenging to test, especially under real operating conditions. This paper presents a practical approach to quality testing of pioneer machines, using a digger as a representative case study, based on procedures applied at the Technical Test Center. The study in this manuscript focuses on the implementation of testing procedures required to verify compliance with specified technical characteristics and manufacturer requirements for a digger as a representative machine for the case study. Emphasis is placed on practical testing methods used at the Technical Test Center, including measurement techniques and testing conditions that ensure reliable and repeatable results in real operating environments. The results obtained were based on precise measurements within different testing frameworks and were evaluated against relevant standards and regulatory requirements. Following the completion of all testing procedures, an overall assessment of the level of compliance with the required characteristics was conducted. In addition, the usability and future potential of the machine were evaluated from the perspective of its design and the analyzed performance characteristics.
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. 3. Section,p. 121-126
Practical approaches to quality testing of pioneer machines
Pioneer machines, such as diggers, are particularly challenging to test, especially under real operating conditions. This paper presents a practical approach to quality testing of pioneer machines, using a digger as a representative case study, based on procedures applied at the Technical Test Center. The study in this manuscript focuses on the implementation of testing procedures required to verify compliance with specified technical characteristics and manufacturer requirements for a digger as a representative machine for the case study. Emphasis is placed on practical testing methods used at the Technical Test Center, including measurement techniques and testing conditions that ensure reliable and repeatable results in real operating environments. The results obtained were based on precise measurements within different testing frameworks and were evaluated against relevant standards and regulatory requirements. Following the completion of all testing procedures, an overall assessment of the level of compliance with the required characteristics was conducted. In addition, the usability and future potential of the machine were evaluated from the perspective of its design and the analyzed performance characteristics.
- Open Access
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Vojnotehnicki glasnik
- Vol. 74 (2) , 519-530
Experimental assessment of acoustic effects of cannon fire on crew
Introduction/purpose: The noise generated by artillery firing can have an extremely harmful effect on the people using it, namely the crew. The subject of this paper is the measurement and analysis of noise levels on artillery weapons used in the Serbian Army. Methods: The analysis and comparison of the results were carried out during operation of weapons of different calibers. Also, the aspect of impact and risk on the crew exposed to the mentioned physical phenomena was considered. Results: The results of the examination of the acoustic parameters in relation to the available criteria show that the crew on certain vehicles is exposed to a higher level of noise than allowed. Conclusion: It is concluded that all measured noise levels exceed the prescribed limit value. Based on the obtained results, further work can be done on reducing negative physical phenomena, as well as providing adequate equipment for the protection of the crew.
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Vojnotehnicki glasnik
- Vol. 74 (2) , 519-530
Open AccessExperimental assessment of acoustic effects of cannon fire on crew
Introduction/purpose: The noise generated by artillery firing can have an extremely harmful effect on the people using it, namely the crew. The subject of this paper is the measurement and analysis of noise levels on artillery weapons used in the Serbian Army. Methods: The analysis and comparison of the results were carried out during operation of weapons of different calibers. Also, the aspect of impact and risk on the crew exposed to the mentioned physical phenomena was considered. Results: The results of the examination of the acoustic parameters in relation to the available criteria show that the crew on certain vehicles is exposed to a higher level of noise than allowed. Conclusion: It is concluded that all measured noise levels exceed the prescribed limit value. Based on the obtained results, further work can be done on reducing negative physical phenomena, as well as providing adequate equipment for the protection of the crew.
- 30 November 2025
- Published by Society for Structural Integrity and Life "Prof. dr Stojan Sedmak" in Structural Integrity and Life
- Vol. 25 (2) , 221-226
Some remarks on the basic principles of ultrasonic welding of conductors in the automotive industry
The application of ultrasonic welding has increased over the last decade due to the rapid technological development and its availability at lower cost. In this paper ultrasonic welding of conductors is presented as one of the most important manufacturing processes in the automotive industry. Using this method of welding, conductor joints are created that represent a crucial part of any electrical installation such as wiring harnesses for vehicles. Additionally, connections between conductors and components, such as metal terminals, can also be achieved using the same welding process. These conductor joints or connections between conductors and terminals must provide high electrical conductivity and satisfying mechanical properties in order to create a safe and reliable product. The conclusions of this study provide some advantages of ultrasonic welding application, particularly in the automotive industry, and further trends in this field.
- 30 November 2025
- Published by Society for Structural Integrity and Life "Prof. dr Stojan Sedmak" in Structural Integrity and Life
- Vol. 25 (2) , 221-226
Some remarks on the basic principles of ultrasonic welding of conductors in the automotive industry
The application of ultrasonic welding has increased over the last decade due to the rapid technological development and its availability at lower cost. In this paper ultrasonic welding of conductors is presented as one of the most important manufacturing processes in the automotive industry. Using this method of welding, conductor joints are created that represent a crucial part of any electrical installation such as wiring harnesses for vehicles. Additionally, connections between conductors and components, such as metal terminals, can also be achieved using the same welding process. These conductor joints or connections between conductors and terminals must provide high electrical conductivity and satisfying mechanical properties in order to create a safe and reliable product. The conclusions of this study provide some advantages of ultrasonic welding application, particularly in the automotive industry, and further trends in this field.
- 20 January 2025
- Published by University of Nis in Facta Universitatis, Series: Working and Living Environmental Protection
- p. 341-349
RECONNAISSANCE DRONE NOISE REVIEW
The paper analyzes the sound of drones, both as environmental noise and as a parameter for their detection. The reasons for the psychoacoustic character of the noise and the conditions for effective acoustic detection are examined. Comparative results of sound measurements are provided for three types of reconnaissance drones individually, while hovering at different altitudes.
- 20 January 2025
- Published by University of Nis in Facta Universitatis, Series: Working and Living Environmental Protection
- p. 341-349
RECONNAISSANCE DRONE NOISE REVIEW
The paper analyzes the sound of drones, both as environmental noise and as a parameter for their detection. The reasons for the psychoacoustic character of the noise and the conditions for effective acoustic detection are examined. Comparative results of sound measurements are provided for three types of reconnaissance drones individually, while hovering at different altitudes.
- 20 January 2025
- Published by University of Nis in Facta Universitatis, Series: Working and Living Environmental Protection
- p. 455-463
APPLICATION OF ULTRASOUND FOR DIFFERENT PURPOSES WITH EXAMPLES
In the last decade application of ultrasound has been increasing. The reason for this is that a wide range of frequencies can be utilized for various purposes. Different scientific fields describe ultrasound in their own way, and from an engineering point of view, the use of ultrasound is quite interesting. The purpose of this paper is to provide an overview of how ultrasound can be applied in diagnostics and welding, including practical examples. Also, during this research dependency between the measured echo of ultrasound wave and depth of founded irregularity is given.
- 20 January 2025
- Published by University of Nis in Facta Universitatis, Series: Working and Living Environmental Protection
- p. 455-463
APPLICATION OF ULTRASOUND FOR DIFFERENT PURPOSES WITH EXAMPLES
In the last decade application of ultrasound has been increasing. The reason for this is that a wide range of frequencies can be utilized for various purposes. Different scientific fields describe ultrasound in their own way, and from an engineering point of view, the use of ultrasound is quite interesting. The purpose of this paper is to provide an overview of how ultrasound can be applied in diagnostics and welding, including practical examples. Also, during this research dependency between the measured echo of ultrasound wave and depth of founded irregularity is given.