Zhengping Shang
Research Subjects
Zhengping Shang has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Feng Guo
Inner Mongolia University of Technology, School of Material Science and Engineering, Hohhot, Inner Mongolia, 010051, People’s Republic of China
1 shared publication - Huisheng Cai
School of Material Science and Engineering, Inner Mongolia University of Technology, Hohhot 010051, China
1 shared publication - Liang Liu
Inner Mongolia Key Laboratory of New Materials and Surface Engineering, School of Material Science and Engineering, Inner Mongolia University of Technology, Hohhot 010051, China
1 shared publication - Mahmoud Ebrahimi
University of Maragheh
1 shared publication - Qixiang Jia
National Engineering Research Center of Light Alloy Net Forming and State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
1 shared publication - Qudong Wang
National Engineering Research Center of Light Alloy Net Forming, State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
1 shared publication
Latest Publications
- Open Access
Interfacial Shear Fracture Behavior of C18150Cu/1060Al/C18150Cu Trilayered Composite at Different Temperatures
Interfacial shear fracture behavior of C18150Cu/1060Al/C18150Cu trilayered composite at different temperatures, which was fabricated by high-temperature oxygen-free hot rolling technology. The interfacial microstructure, interfacial shear strength, interfacial shear fracture morphology, and microstructure near the shear fracture were systematically investigated. The results reveal that the composite exhibits a metallurgical and mechanical bonding interface, along with mechanical interlocking between the copper and aluminum. As the testing temperature increases, the interfacial shear strength decreases. At temperatures below 150 °C, the strength remains stable, but it sharply decreases at temperatures above 150 °C. Specifically, the interfacial shear strength is 56.8 MPa at room temperature and 20.9 MPa at 350 °C. When the testing temperature is below 100 °C, the interfacial shear fracture predominantly occurs at the interface between the copper alloy and intermetallics. Also, aluminum is attached to the copper surface of the shear fracture, and the size and quantity of attached aluminum increase with the increase in temperature. When the testing temperature exceeds 100 °C, curled aluminum appears on the copper layer, and a large number of intermetallics are attached to the aluminum surface. This indicates that the bonding strength between intermetallics and aluminum is higher than that between intermetallics and copper.
Open AccessInterfacial Shear Fracture Behavior of C18150Cu/1060Al/C18150Cu Trilayered Composite at Different Temperatures
Interfacial shear fracture behavior of C18150Cu/1060Al/C18150Cu trilayered composite at different temperatures, which was fabricated by high-temperature oxygen-free hot rolling technology. The interfacial microstructure, interfacial shear strength, interfacial shear fracture morphology, and microstructure near the shear fracture were systematically investigated. The results reveal that the composite exhibits a metallurgical and mechanical bonding interface, along with mechanical interlocking between the copper and aluminum. As the testing temperature increases, the interfacial shear strength decreases. At temperatures below 150 °C, the strength remains stable, but it sharply decreases at temperatures above 150 °C. Specifically, the interfacial shear strength is 56.8 MPa at room temperature and 20.9 MPa at 350 °C. When the testing temperature is below 100 °C, the interfacial shear fracture predominantly occurs at the interface between the copper alloy and intermetallics. Also, aluminum is attached to the copper surface of the shear fracture, and the size and quantity of attached aluminum increase with the increase in temperature. When the testing temperature exceeds 100 °C, curled aluminum appears on the copper layer, and a large number of intermetallics are attached to the aluminum surface. This indicates that the bonding strength between intermetallics and aluminum is higher than that between intermetallics and copper.