Yingming Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yingming Wang has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
Kejun Hu
Jiangsu University of Technology
2 shared publicationsLiuyang Duan
Jiangsu University of Technology
2 shared publicationsWenqin Han
School of Materials Engineering Jiangsu University of Technology Changzhou China
2 shared publicationsBin Hu
School of Materials Engineering Jiangsu University of Technology Changzhou China
1 shared publication- Kejun Hu
School of Materials Engineering Jiangsu University of Technology Changzhou Jiangsu China
1 shared publication Kuishang Bu
Jiangsu University of Technology
1 shared publication
Latest Publications
- 28 June 2026
- Published by SAGE Publications in Journal of Composite Materials
Exploring low-velocity impact-induced damage evolution and failure mechanism in composite laminates: Acoustic emission monitoring and finite element simulation
This work combines acoustic emission (AE) testing and finite element (FE) simulation to explore damage evolution and failure mechanisms of carbon/glass interlayer hybrid laminates under low-velocity impact (LVI). In the experimental part, variational mode decomposition (VMD) were adopted to process the AE signals during the impact process, which preliminarily assigned to and identified the AE characteristics corresponding to four typical damage modes (matrix cracking, fiber-matrix debonding, delamination and fiber fracture), and further analyzed their evolutionary sequence and synergistic effect in the impact process. In the numerical part, a refined three-dimensional FE model integrated with the progressive damage model and cohesive elements was established to simulate the damage initiation and propagation behavior under impact load. At 40J and 60J impact energies, matrix cracking initiates first and dominates damage; fiber/matrix debonding and delamination follow sequentially, and fiber fracture appears last. The increase in impact energy significantly aggravates the propagation of delamination damage. The results of numerical simulation and AE analysis mutually verify each other, revealing the core mechanism of low-energy impact damage: the initiation and propagation of intralaminar damage dominated by fiber/matrix in the early stage further induce and dominate the macroscopic failure process dominated by delamination in the later stage.
- 28 June 2026
- Published by SAGE Publications in Journal of Composite Materials
Exploring low-velocity impact-induced damage evolution and failure mechanism in composite laminates: Acoustic emission monitoring and finite element simulation
This work combines acoustic emission (AE) testing and finite element (FE) simulation to explore damage evolution and failure mechanisms of carbon/glass interlayer hybrid laminates under low-velocity impact (LVI). In the experimental part, variational mode decomposition (VMD) were adopted to process the AE signals during the impact process, which preliminarily assigned to and identified the AE characteristics corresponding to four typical damage modes (matrix cracking, fiber-matrix debonding, delamination and fiber fracture), and further analyzed their evolutionary sequence and synergistic effect in the impact process. In the numerical part, a refined three-dimensional FE model integrated with the progressive damage model and cohesive elements was established to simulate the damage initiation and propagation behavior under impact load. At 40J and 60J impact energies, matrix cracking initiates first and dominates damage; fiber/matrix debonding and delamination follow sequentially, and fiber fracture appears last. The increase in impact energy significantly aggravates the propagation of delamination damage. The results of numerical simulation and AE analysis mutually verify each other, revealing the core mechanism of low-energy impact damage: the initiation and propagation of intralaminar damage dominated by fiber/matrix in the early stage further induce and dominate the macroscopic failure process dominated by delamination in the later stage.
- 29 March 2025
- Published by Wiley in Polymer Composites
- Vol. 46 (S2)
Study on the toughening of epoxy resin modified by multi‐component fillers of carbon nanofibers/nano‐silica/short carbon fibers
The present study investigates the effects of carbon nanofibers (CNF), nano‐silica (SiO 2 ) and short carbon fibers (SCF) on the tensile strength and fracture toughness of cured epoxy resins. The damage patterns exhibited by the modified epoxy resin specimens were analyzed using the acoustic emission (AE) technique during fracture toughness tests. The digital image correlation (DIC) technique was employed to monitor the evolution of the strain field on the specimen surface. Scanning electron microscopy (SEM) was used to observe the fractured surface of the specimens to analyze the toughening mechanism. The experimental findings demonstrated that the tensile strength of the epoxy resin attained its maximum when blended with two fillers, 1.0 wt.% CNF and 0.5 wt.% SiO 2 , resulting in an enhancement of 11.71%. The elongation of the material was maximized when blending epoxy resin with three fillers: 1 wt.% CNF, 0.5 wt.% SiO 2 , and 0.5 wt.% SCF, resulting in a 6.6% increase in tensile strength. In the single edge notched tensile (SENT) test, the critical strain energy release rate ( G IC ) exhibited a 24.41% increase, representing the most substantial increase observed. In the single edge notched bending (SENB) test, the G IC was significantly increased by 51.51%, indicating its excellent mechanical properties and fracture toughness. Highlights: Research on the synergistic toughening of epoxy resin by multi‐scale fillers: CNF, SiO2, and SCF. AE and DIC were used to analyze the damage evolution of the epoxy resins/composites during the fracture toughness test. SEM was used to analyze the toughening mechanism of the epoxy resins/composites.
- 29 March 2025
- Published by Wiley in Polymer Composites
- Vol. 46 (S2)
Study on the toughening of epoxy resin modified by multi‐component fillers of carbon nanofibers/nano‐silica/short carbon fibers
The present study investigates the effects of carbon nanofibers (CNF), nano‐silica (SiO 2 ) and short carbon fibers (SCF) on the tensile strength and fracture toughness of cured epoxy resins. The damage patterns exhibited by the modified epoxy resin specimens were analyzed using the acoustic emission (AE) technique during fracture toughness tests. The digital image correlation (DIC) technique was employed to monitor the evolution of the strain field on the specimen surface. Scanning electron microscopy (SEM) was used to observe the fractured surface of the specimens to analyze the toughening mechanism. The experimental findings demonstrated that the tensile strength of the epoxy resin attained its maximum when blended with two fillers, 1.0 wt.% CNF and 0.5 wt.% SiO 2 , resulting in an enhancement of 11.71%. The elongation of the material was maximized when blending epoxy resin with three fillers: 1 wt.% CNF, 0.5 wt.% SiO 2 , and 0.5 wt.% SCF, resulting in a 6.6% increase in tensile strength. In the single edge notched tensile (SENT) test, the critical strain energy release rate ( G IC ) exhibited a 24.41% increase, representing the most substantial increase observed. In the single edge notched bending (SENB) test, the G IC was significantly increased by 51.51%, indicating its excellent mechanical properties and fracture toughness. Highlights: Research on the synergistic toughening of epoxy resin by multi‐scale fillers: CNF, SiO2, and SCF. AE and DIC were used to analyze the damage evolution of the epoxy resins/composites during the fracture toughness test. SEM was used to analyze the toughening mechanism of the epoxy resins/composites.
- 22 January 2025
- Published by Wiley in Polymer Composites
- Vol. 46 (9) , 8556-8574
Experimental investigation on the impact resistance and damage mechanism of carbon/glass unidirectional and woven hybrid laminates
The mechanical properties of hybrid fiber composite laminates are affected by the hybrid ratio as well as the stacking sequences, to investigate the effect. In this paper, the effects of the hybrid ratio and stacking sequences on the impact resistance and residual compression properties of carbon/glass unidirectional and woven hybrid laminates are investigated. The use of acoustic emission technology enables the real‐time monitoring of the impact and compression damage processes of carbon/glass composite laminates with varying hybrid ratios and stacking sequences, thereby facilitating the elucidation of the underlying failure mechanisms and the evolution of the laminates. The findings indicated that laminates with symmetrical stacking demonstrated superior impact resistance, resilience, and residual compression properties compared to those with asymmetrical stacking when subjected to high‐energy impact. Sandwich stackings demonstrate superior energy absorption properties relative to alternate‐stacking laminates, although they exhibit diminished residual compression properties. The impact resistance of laminates with a high carbon content under a sandwich stacking sequence is poor. In the context of alternating symmetric stacking, the impact resistance of the laminate is not significantly influenced by the carbon content. The results of the acoustic emission analysis indicate that the damage is minimized when the stacking sequence is alternating symmetry and the impact side is a woven material.Highlights: Enhancing impact resistance of composites through hybrid structure research. Report the optimal parameters of the effects on the impact resistance of the composite. The VMD method is used to determine the percentage of damage types in the laminate.
- 22 January 2025
- Published by Wiley in Polymer Composites
- Vol. 46 (9) , 8556-8574
Experimental investigation on the impact resistance and damage mechanism of carbon/glass unidirectional and woven hybrid laminates
The mechanical properties of hybrid fiber composite laminates are affected by the hybrid ratio as well as the stacking sequences, to investigate the effect. In this paper, the effects of the hybrid ratio and stacking sequences on the impact resistance and residual compression properties of carbon/glass unidirectional and woven hybrid laminates are investigated. The use of acoustic emission technology enables the real‐time monitoring of the impact and compression damage processes of carbon/glass composite laminates with varying hybrid ratios and stacking sequences, thereby facilitating the elucidation of the underlying failure mechanisms and the evolution of the laminates. The findings indicated that laminates with symmetrical stacking demonstrated superior impact resistance, resilience, and residual compression properties compared to those with asymmetrical stacking when subjected to high‐energy impact. Sandwich stackings demonstrate superior energy absorption properties relative to alternate‐stacking laminates, although they exhibit diminished residual compression properties. The impact resistance of laminates with a high carbon content under a sandwich stacking sequence is poor. In the context of alternating symmetric stacking, the impact resistance of the laminate is not significantly influenced by the carbon content. The results of the acoustic emission analysis indicate that the damage is minimized when the stacking sequence is alternating symmetry and the impact side is a woven material.Highlights: Enhancing impact resistance of composites through hybrid structure research. Report the optimal parameters of the effects on the impact resistance of the composite. The VMD method is used to determine the percentage of damage types in the laminate.