JDJunyi Duan

Junyi Duan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Junyi Duan has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Hybrid Experimental–Numerical Framework for Monitoring Bottom-Up Reflective Cracking in Asphalt-Overlaid PCC Pavements Using OFDR-Based Distributed Fiber Optic Sensing

    by Yasir Mahmood, Luyang Xu, Dawei Zhang, Ying Huang, Pan Lu, Kathryn Quenette, Nof Yasir, Rouzbeh Ghabchi, Muhammad Ilyas, Junyi Duan, et al.

    Reflective cracking is one of the primary causes of premature deterioration in asphalt-overlaid Portland cement concrete (PCC) pavements, reducing service life and increasing maintenance costs. Since crack initiation begins within the underlying PCC layer before becoming visible at the pavement surface, conventional inspection methods have limited capability for early damage detection and continuous monitoring. This study presents a hybrid experimental–numerical framework for monitoring and interpreting bottom-up reflective cracking by integrating Optical Frequency Domain Reflectometry (OFDR)-based Distributed Fiber-Optic Sensing (DFOS), laboratory-scale three-point bending tests, and finite element (ABAQUS) modeling. Rectangular and semi-cylindrical asphalt-overlaid PCC specimens were instrumented with surface-bonded distributed optical fibers arranged in a serpentine sensing layout with approximately 20 mm spacing to continuously monitor strain evolution during flexural loading. In both tested specimen configurations, the three-point bending tests produced bottom-up crack initiation at the predefined notch within the PCC layer, followed by crack propagation toward the asphalt overlay. Crack-width measurements showed that the maximum crack opening occurred near the notch and progressively decreased toward the asphalt overlay, consistent with the expected flexural stress distribution. The OFDR-based DFOS system successfully identified localized strain concentrations associated with crack initiation and propagation, demonstrating its capability for continuous distributed monitoring of fracture evolution. Finite-element simulations identified tensile stress and strain-localization patterns that showed good qualitative spatial correspondence with the experimentally observed cracking region and distributed strain measurements. The combined experimental, sensing, and numerical results demonstrate the proposed framework’s capability to monitor and interpret bottom-up reflective cracking and highlight the potential of OFDR-based distributed fiber-optic sensing for structural health monitoring, condition assessment, and future field-scale monitoring of rehabilitated concrete pavements.

  • An intelligent design of distributed sensor networks for digital twin-based infrastructure monitoring

    by Huaixiao Yan, Xingyu Wang, Junyi Duan, Sike Wang, Ying Huang, Chengcheng Tao

    Efficient deployment of distributed fiber optic sensors (DFOS) is critical for capturing complex strain behavior in structural health monitoring, especially in scenarios involving non-uniform deformation such as buckling. This study presents an intelligent design framework that integrates experimental testing, finite element analysis (FEA), and advanced data-driven techniques to improve strain field reconstruction and guide sensor deployment. A buckling test on a steel plate instrumented with DFOS was conducted to generate high-resolution strain data, which was used to validate a corresponding FEA model. Four interpolation methods, including bilinear, cubic, inverse distance weighting, and radial basis function (RBF), were selected as benchmarks across various sensor counts. Results indicate that the RBF method provides the most accurate reconstruction performance, particularly under sparse sensor configurations. Moreover, multiple placement strategies were investigated to enhance sensor layout efficiency, including weighted K -means clustering, high-gradient hotspot selection, and density-based spatial clustering of applications with noise. An integrated strategy combining these methods was developed to achieve balanced spatial coverage while capturing key deformation zones. The findings demonstrate that data-informed deployment strategies can significantly improve monitoring accuracy while reducing sensor redundancy. Finally, several deployment methods for the DFOS were evaluated by six metrics, offering quantitative insights into trade-offs between sensing accuracy and deployment feasibility. While the case study is based on a specific buckling scenario, the proposed methodology is generalizable to other structural conditions. Specifically, for large-scale infrastructure, the framework can be employed to capture strains at critical nodes and to reconstruct full-field strain distributions for digital-twin-based infrastructure monitoring. Overall, this framework provides a flexible and scalable reference for optimizing DFOS installation in high-strain-gradient environments.


  • Open Access

    Digital Twin-Enabled Composite Liner System for Automatic Dent Detection with iFEM-based Deformation Visualization and Performance Prediction in Pipelines

    by Xingyu Wang, Jiannan Ding, Austin Knight, Junyi Duan, Yongfei Li, Yizhou Lin, Chengcheng Tao, Long Jiang, Ying Huang

    This study develops a smart composite liner system and a dedicated digital twin framework integrated with the liner to enable internal protection, continuous deformation monitoring, and predictive assessment of dented pipelines. The composite liner integrates distributed strain sensing, where localized indentation generates strain signatures that are converted into digital twin representations of the dented pipe. Digital twin generation is enabled by two specialized algorithms developed for discrete fiber-path measurements and cylindrical pipeline geometry. First, a machine-learning-enhanced Thin Plate Spline (ML-TPS) approach reconstructs full-field circumferential strain distributions from sparse measurements while retaining sharp strain gradients near the dent. The ML-TPS framework uses feature-engineered strain–depth curves and ensemble learning to predict dent depth and circumferential offset, then applies ML-assisted spline reconstruction to predict strain at irregular circumferential positions. Second, a developed strip-based KLPT iFEM formulation converts the reconstructed strain field into three-dimensional dent geometry. The pipe circumference is partitioned into angular strips aligned with the pipe axis for curvature-based reconstruction, and the strip solutions are merged into a continuous cylindrical surface to recover the full geometry of the dented pipeline. Two practical sensor layouts integrated into the liner, 4-path and 3-path, are evaluated to balance reconstruction fidelity and deployment cost. Displacement-controlled indentation tests with 3D scanning validation demonstrate reliable dent depth reconstruction from 1 mm to 24 mm, corresponding to 12% of pipe outer diameter. The reconstructed geometry supports FEA-based structural capacity assessment, CFD-based flow performance evaluation, and remaining useful life estimation for predictive maintenance.


  • Top Cited Papers

    A digital twin framework for damage detection and localization of self-sensed cured-in-place underground pipelines

    by Junyi Duan, Xingyu Wang, Huaixiao Yan, Sike Wang, Ying Huang, Chengcheng Tao


  • Open Access

    UNet-based Buckling Deformation Reconstruction from Strain Distributions and Knowledge Distillation

    by Sike Wang, Xingyu Wang, Junyi Duan, Huaixiao Yan, Ying Huang, Chengcheng Tao

    This paper presents a novel framework for reconstructing structural buckling deformation from strain distribution. The reconstruction was based on UNet, a convolutional neural network (CNN) that inputs the strain field of the buckling structure to predict the deformation. Two neural network architectures UNet and UNet++ were trained to reconstruct buckling deformation. A new knowledge distillation approach was designed to transfer features of layers from the larger teacher model (UNet++) to the smaller student model (UNet). This approach can improve the accuracy of the student model without increasing model size. To improve knowledge distillation, we replaced uniform weights for feature transformation with adaptive weights. The developed method was validated on a mixed strain-deformation dataset from the finite element analysis and distributed strain measurement, which provided a real-world implication with diverse information. The trained UNet and UNet++ achieved Mean Absolute Percentage Errors (MAPE) of 2.90% and 1.52%, respectively. According to the training results, the best UNet model trained with the proposed knowledge distillation method achieved a MAPE of 1.71%, demonstrating a 41.01% accuracy improvement. A parametric study was conducted to investigate the effect of transferring weights in the proposed framework. In addition, the effect of the framework for deformation reconstruction under varying conditions was evaluated, which indicated a general improvement ability. This study provides a powerful tool to advance the capability of identifying structural buckling by leveraging CNN, smart sensing, numerical modeling, and knowledge distillation, which contributes to health monitoring and anomaly detection of structures.

  • Dual-Purpose smart liner system for oil and gas pipelines: Digital twin-enabled rapid monitoring during strike events

    by Xingyu Wang, Junyi Duan, Xinyi Yang, Huaixiao Yan, Sike Wang, Chengcheng Tao, Ying Huang, Benjamin Verwey


  • Open Access

    Integration of Finite Element Analysis and Machine Learning for Assessing the Spatial-Temporal Conditions of Reinforced Concrete

    by Junyi Duan, Huaixiao Yan, Chengcheng Tao, Xingyu Wang, Shanyue Guan, Yuxin Zhang

    Composite reinforcements are attracting attention in the reinforced concrete (RC) field for their high corrosion resistance, low thermal conductivity, and low electromagnetic interference behavior. However, compared to metallic reinforcements, composites are less ductile and may lead to brittle failure. Three-point flexural tests provide information on the mechanical behavior of metal- and composite-reinforced concrete beams with distinct crack patterns. The structural conditions and failure mechanisms can be defined based on stress change and crack propagation. This study employs finite element analysis (FEA) to simulate the mechanical responses of composite- and metal-reinforced concrete beans under three-point flexural tests and predict the crack propagation in the beams. Machine learning-based algorithms are trained using FEA data to assess the spatial–temporal conditions of the RC beams. The findings indicate that composite rebars provide better reinforcement than metallic rebars in terms of stress fields (30.27% less stress in composite rebars) and crack propagation (fewer cracks in composite RC beams), with the initiation of shear cracks and maximum von Mises stress in rebars being correlated. The findings highlight the effectiveness of the Random Forest Regression (RFR) algorithm (R2=0.96) in assessing RC beam conditions under flexural loads, offering insights for efficient industry applications.


  • Implementing an Advanced Friction Testing Program for Seamless Coverage of INDOT System

    by Chengcheng Tao, Yizhou Lin, Junyi Duan, Cheng Peng, Jieyi Bao, Yi Jiang, Shuo Li

    The interaction between tires and the road surface is crucial for maintaining vehicle stability and safety. The frictional forces at the tire-road interface, along with the coefficient of friction, affect vehicle dynamics, influencing transportation safety. Rapid advancements in transportation technology, infrastructure demands, and safety regulations pose complex transportation challenges, requiring adaptive solutions. The goal of this study is to provide actionable insights for highway agencies, offering improved friction assessment methodologies that support safer and more effective roadway maintenance and design. This study investigates and verify Locked Wheel Skid Tester (LWST) friction measurement on horizontal curves using Sideway-force Coefficient Routine Investigation Machine (SCRIM), pavement friction performance adjustment factor through a numerical approach incorporating thermomechanical finite element analysis (FEA), and advanced pavement marking assessments. The research aims to enhance friction measurement accuracy and improve roadway safety by integrating predictive modeling and field validation. Machine learning algorithms refine the interpretation of friction data, enabling the development of adjustment factors for various road geometries and speeds. Additionally, optimized pavement marking materials, including angular glass beads and ceramic particles, are explored to enhance long-term durability and friction performance.