ZWZhen Wang

Zhen Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Zhen Wang has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Wearable Broadband Circularly Polarized Antenna With Characteristic Mode Analysis for Wireless Body Area Network Applications

    by Zhen Wang, Heng Luo, Jian Dong, Meng Wang, Jinchao Tong, Chengwang Xiao, Jinfei Zheng, Rigeng Wu

    This letter presents a flexible, wearable, broadband circularly polarized antenna. A novel polarized conversion metasurface is loaded onto the flexible antenna, greatly expanding impedance and axial ratio bandwidths with the size of 52.6 mm × 49.6 mm × 6.325 mm (0.91 λ0 × 0.86 λ0 × 0.11 λ0, λ0 = 5.2 GHz). Besides, Characteristic Mode Analysis is applied to reveal the working mechanism of the antenna. Experimental results indicate that an impedance bandwidth of 4.48-8.39 GHz (60.8%) and a 3 dB axial ratio bandwidth of 4.43-6.52 GHz (38.2%) could be achieved. Additionally, when the human tissue is 10 g, the peak specific absorption rate (SAR) is 0.3800 W/kg, which is far below the limits of 2.0 W/kg under the 10 g average. The conducted robustness analysis demonstrates the antenna's exceptional stability under various operational conditions, making it a promising candidate for integration into wearable sensor systems.


  • Open Access

    The effect of Fe content on crystal phase and mechanical properties of 6061 aluminium alloy

    by Zhen Wang, Shiwen Jiang, Tianze Liu, Chunyan Ban

    In order to eliminate the adverse effects of impurity element Fe in aluminium alloy, the effects of Fe content on the microstructures and mechanical properties of 6061 aluminium alloy were studied utilizing scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and tensile testing machine. The results show that Fe exists mainly in α-AlFeSi and β-AlFeSi phases. Elemental Fe promotes the generation of fishbone shaped α-AlFeSi phase, while the percentage of needle shaped β-AlFeSi phase gradually decreases. After homogenizing annealing, the Mg2Si phase has been redissolved, and a large amount of Si element exists in the aluminium matrix. With the increase of Fe and Si content, β→α phase transition has been completed, and the fishbone α-AlFeSi phase accumulates at the grain boundary. After the extrusion forming process, the morphology of the α-Al12(MnFe)3Si phase changes from fishbone to granular, and the bulk deposition of α-Al12(MnFe)3Si improves the strength of 6061 aluminium alloy.