Sion Jin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sion Jin has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Byoung-Kwon Ahn
Chungnam National University
4 shared publications - Rafat Ivan Ahamed Simanto
Department of Autonomous Vehicle System Engineering, Chungnam National University , Daejeon 34134
4 shared publications - Ji-Woo Hong
Chungnam National University
1 shared publication
Latest Publications
- 1 June 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (6)
Investigation of vortex flow fields around a circular cylinder using particle image velocimetry. II: Influence of strake cross-sectional geometry
Building on Paper I, which demonstrates that three-start semi-elliptical (D-type) helical strakes fundamentally suppress the Kármán vortex street and reduce near-wake turbulence by approximately 30%–40% at high Reynolds numbers (Re), the present study extends the analysis to compare wake modification and turbulence-suppression performance among semi-elliptical (D-), square (S-), and triangular (T-type) strakes at Re ≈ 1.32 × 105. All strake configurations fragment the dominant counter-rotating vortex system and restore wake symmetry without periodic vortex shedding. Geometry-specific effects are evident: sharper-edged S- and T-type strakes induce earlier separation and stronger streamwise vorticity, producing more aggressive wake disruption than the smoother D-type configuration. Therefore, triangular strakes yield the most diffuse wakes, with square strakes performing comparably effectively, whereas semi-elliptical strakes leave slightly more organized residual structures. Particle image velocimetry (PIV) measurements confirm these trends, showing that peak Reynolds shear stress decreases by 40%–60%, while the dominant in-plane turbulent kinetic energy (TKEip) in the principal wake region is reduced by approximately 50%–70%, with the local reduction varying depending on measurement location; the Q-criterion analysis further indicates that the organized rotational wake structures are weakened and redistributed by the strakes. At specific planes, triangular strakes reduce peak TKEip to one-third of the bare-cylinder value, with square strakes producing nearly equivalent results and semi-elliptical strakes exhibiting slightly higher but still markedly reduced residuals. Proper orthogonal decomposition of the PIV velocity fields is performed to gain a deeper understanding of the wake dynamics. This reveals the evolution of dominant energetic modes with varying strake geometries and illustrates how coherent structures are progressively fragmented along the span. The decisive mechanism, early three-dimensional and spanwise-decorrelated separation driven by the helical strakes, is common to all cases, breaking coherent rollers into smaller eddies and redistributing turbulence away from the centerline. Although sharper strake geometries accelerate wake breakdown (T ≳ S > D), the dominant mechanism for vortex-induced vibration suppression resides in the helical strake-induced, three-dimensional wake disruption, providing clear physical insight and practical guidance for optimizing passive flow-induced vibration control.
- 1 June 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (6)
Investigation of vortex flow fields around a circular cylinder using particle image velocimetry. II: Influence of strake cross-sectional geometry
Building on Paper I, which demonstrates that three-start semi-elliptical (D-type) helical strakes fundamentally suppress the Kármán vortex street and reduce near-wake turbulence by approximately 30%–40% at high Reynolds numbers (Re), the present study extends the analysis to compare wake modification and turbulence-suppression performance among semi-elliptical (D-), square (S-), and triangular (T-type) strakes at Re ≈ 1.32 × 105. All strake configurations fragment the dominant counter-rotating vortex system and restore wake symmetry without periodic vortex shedding. Geometry-specific effects are evident: sharper-edged S- and T-type strakes induce earlier separation and stronger streamwise vorticity, producing more aggressive wake disruption than the smoother D-type configuration. Therefore, triangular strakes yield the most diffuse wakes, with square strakes performing comparably effectively, whereas semi-elliptical strakes leave slightly more organized residual structures. Particle image velocimetry (PIV) measurements confirm these trends, showing that peak Reynolds shear stress decreases by 40%–60%, while the dominant in-plane turbulent kinetic energy (TKEip) in the principal wake region is reduced by approximately 50%–70%, with the local reduction varying depending on measurement location; the Q-criterion analysis further indicates that the organized rotational wake structures are weakened and redistributed by the strakes. At specific planes, triangular strakes reduce peak TKEip to one-third of the bare-cylinder value, with square strakes producing nearly equivalent results and semi-elliptical strakes exhibiting slightly higher but still markedly reduced residuals. Proper orthogonal decomposition of the PIV velocity fields is performed to gain a deeper understanding of the wake dynamics. This reveals the evolution of dominant energetic modes with varying strake geometries and illustrates how coherent structures are progressively fragmented along the span. The decisive mechanism, early three-dimensional and spanwise-decorrelated separation driven by the helical strakes, is common to all cases, breaking coherent rollers into smaller eddies and redistributing turbulence away from the centerline. Although sharper strake geometries accelerate wake breakdown (T ≳ S > D), the dominant mechanism for vortex-induced vibration suppression resides in the helical strake-induced, three-dimensional wake disruption, providing clear physical insight and practical guidance for optimizing passive flow-induced vibration control.
- 1 June 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (6)
Investigation of vortex flow fields around a circular cylinder using particle image velocimetry. I. Suppression of vortex shedding by helical strakes
The vortex-induced vibrations (VIVs) caused by a fluid flowing over a cylindrical structure present a significant challenge in engineering applications, often leading to structural fatigue and failure. This study investigates the effectiveness of three-start spiral helical strakes in suppressing vortex shedding around a cylindrical body. Flow fields are analyzed for semielliptical strake shapes using particle image velocimetry, and experiments are conducted at Reynolds numbers ranging from 0.97 × 105 to 1.32 × 105 to determine how helical strakes suppress vortex shedding. The analysis focuses on four distinct planes (0°, 30°, 60°, and 90°), corresponding to different alignments of the strake with the cylinder centerline. By comparing the velocity components in both the parallel (X) and transverse (Y) directions, the mechanisms behind vortex-shedding suppression are identified through examinations of the vorticity, averaged streamlines, Q-criterion, and turbulent kinetic energy. The results show that the helical strakes significantly reduce vortex shedding, effectively altering the flow dynamics and improving the efficiency of vortex suppression. The semielliptical helical strakes substantially weaken the von Kármán vortex street, broaden and stabilize the wake, and reduce peak in-plane turbulent kinetic energy by 30%–40% at the highest Reynolds number. These findings provide valuable insights into passive flow-control strategies, offering a practical approach to mitigating sources of VIV in cylindrical structures across various engineering applications. Because the influences of helical strakes and Reynolds-number effects had to be thoroughly established (in Paper I) before geometry-dependent behavior could be meaningfully interpreted (in Paper II), the study was separated into two coordinated parts to present each component with the clarity and depth it requires. Paper I established a physical base for further exploring the role of strake geometry, which is systematically addressed in Paper II.
- 1 June 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (6)
Investigation of vortex flow fields around a circular cylinder using particle image velocimetry. I. Suppression of vortex shedding by helical strakes
The vortex-induced vibrations (VIVs) caused by a fluid flowing over a cylindrical structure present a significant challenge in engineering applications, often leading to structural fatigue and failure. This study investigates the effectiveness of three-start spiral helical strakes in suppressing vortex shedding around a cylindrical body. Flow fields are analyzed for semielliptical strake shapes using particle image velocimetry, and experiments are conducted at Reynolds numbers ranging from 0.97 × 105 to 1.32 × 105 to determine how helical strakes suppress vortex shedding. The analysis focuses on four distinct planes (0°, 30°, 60°, and 90°), corresponding to different alignments of the strake with the cylinder centerline. By comparing the velocity components in both the parallel (X) and transverse (Y) directions, the mechanisms behind vortex-shedding suppression are identified through examinations of the vorticity, averaged streamlines, Q-criterion, and turbulent kinetic energy. The results show that the helical strakes significantly reduce vortex shedding, effectively altering the flow dynamics and improving the efficiency of vortex suppression. The semielliptical helical strakes substantially weaken the von Kármán vortex street, broaden and stabilize the wake, and reduce peak in-plane turbulent kinetic energy by 30%–40% at the highest Reynolds number. These findings provide valuable insights into passive flow-control strategies, offering a practical approach to mitigating sources of VIV in cylindrical structures across various engineering applications. Because the influences of helical strakes and Reynolds-number effects had to be thoroughly established (in Paper I) before geometry-dependent behavior could be meaningfully interpreted (in Paper II), the study was separated into two coordinated parts to present each component with the clarity and depth it requires. Paper I established a physical base for further exploring the role of strake geometry, which is systematically addressed in Paper II.
- Open Access
- 18 April 2026
- Published by Elsevier in SSRN Electronic Journal
Flow compartmentalization, localized momentum redistribution, and coherent trailing-edge vortex suppression induced by bio-inspired leading-edge protuberances
This study investigates the physical mechanism by which bio-inspired sinusoidal leading-edge protuberances induce flow compartmentalization and suppress coherent trailing-edge vortex formation in hydrofoil flow. Experiments were conducted in a cavitation tunnel using two-dimensional hydrofoils, including a baseline NACA 0012 and an L-E modified counterpart incorporating sinusoidal leading-edge tubercles. Particle image velocimetry (PIV), high-speed flow visualization, and laser Doppler velocimetry (LDV) were employed to characterize both cavitating and non-cavitating conditions. Under non-cavitating conditions, the baseline hydrofoil exhibits a distinct coherent trailing-edge vortex associated with strong shear-layer roll-up and wake unsteadiness. In contrast, the L-E modified hydrofoil shows a substantially weakened or absent dominant trailing-edge vortex. A combined PIV–LDV analysis near the leading edge, supported by Piecewise Cubic Hermite Interpolating Polynomial (PCHIP) reconstruction, reveals that the sinusoidal leading edge generates localized streamwise acceleration behind the trough regions, accompanied by wall-normal deflection, spanwise momentum redistribution, and a trough-centered counter-rotating vortex pair. These coupled motions reorganize the near-wall flow into compartmentalized three-dimensional structures, weaken the spanwise coherence of the developing boundary layer and shear layer, and thereby suppress coherent trailing-edge vortex formation. Under cavitating conditions, the same mechanism confines vapor structures primarily to the trough regions, inhibits spanwise cavity merging, and fragments large-scale cloud shedding into smaller localized cavities. The results demonstrate that sinusoidal leading-edge protuberances act as an effective passive flow-reorganization mechanism, simultaneously suppressing coherent trailing-edge structures and promoting cavitation compartmentalization through early three-dimensional momentum redistribution.
- 18 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessFlow compartmentalization, localized momentum redistribution, and coherent trailing-edge vortex suppression induced by bio-inspired leading-edge protuberances
This study investigates the physical mechanism by which bio-inspired sinusoidal leading-edge protuberances induce flow compartmentalization and suppress coherent trailing-edge vortex formation in hydrofoil flow. Experiments were conducted in a cavitation tunnel using two-dimensional hydrofoils, including a baseline NACA 0012 and an L-E modified counterpart incorporating sinusoidal leading-edge tubercles. Particle image velocimetry (PIV), high-speed flow visualization, and laser Doppler velocimetry (LDV) were employed to characterize both cavitating and non-cavitating conditions. Under non-cavitating conditions, the baseline hydrofoil exhibits a distinct coherent trailing-edge vortex associated with strong shear-layer roll-up and wake unsteadiness. In contrast, the L-E modified hydrofoil shows a substantially weakened or absent dominant trailing-edge vortex. A combined PIV–LDV analysis near the leading edge, supported by Piecewise Cubic Hermite Interpolating Polynomial (PCHIP) reconstruction, reveals that the sinusoidal leading edge generates localized streamwise acceleration behind the trough regions, accompanied by wall-normal deflection, spanwise momentum redistribution, and a trough-centered counter-rotating vortex pair. These coupled motions reorganize the near-wall flow into compartmentalized three-dimensional structures, weaken the spanwise coherence of the developing boundary layer and shear layer, and thereby suppress coherent trailing-edge vortex formation. Under cavitating conditions, the same mechanism confines vapor structures primarily to the trough regions, inhibits spanwise cavity merging, and fragments large-scale cloud shedding into smaller localized cavities. The results demonstrate that sinusoidal leading-edge protuberances act as an effective passive flow-reorganization mechanism, simultaneously suppressing coherent trailing-edge structures and promoting cavitation compartmentalization through early three-dimensional momentum redistribution.
- 1 January 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (1)
Comparative investigation of cavitating and non-cavitating flows around a two-dimensional hydrofoil using particle image velocimetry
This study presents a thorough comparative analysis of non-cavitating and cavitating flows around a two-dimensional National Advisory Committee for Aeronautics airfoil (NACA) 0012 hydrofoil, focusing on flow behavior at different cavitation numbers while maintaining a constant Reynolds number. The experiments, conducted at Chungnam National University's cavitation tunnel, employ Particle Image Velocimetry to capture and analyze the flow dynamics under both regimes. The Reynolds number ranges from 5.8 × 105 to 7.2 × 105, with cavitation numbers (σ) ranging from 4.2 to 3.1 under cavitating conditions and 8.4 to 6.6 under non-cavitating conditions. The results indicated that cavitation substantially influences flow structures, forming re-entrant jets, intensifying shear zones, and increasing vortex shedding. As the cavitation length expands from 0.05 C to 0.4 C with decreasing σ, regions of heightened shear strain are observed between 0.2 and 0.65 C. The flow under non-cavitating conditions demonstrates smoother, more consistent behavior, with vortices concentrated near the trailing edge beyond 0.5 C. Detailed analyses of vector tracking, Q-criterion, and vorticity further clarify the complex interactions between cavitation and vortex dynamics, providing a comprehensive understanding of cavitating flows' turbulent behaviors and instabilities. This research offers new insights into the impact of cavitation on hydrofoil performance by maintaining a constant velocity while varying cavitation numbers. It contributes to a more profound understanding of cavitation phenomena and their implications for design and performance optimization in marine and industrial applications. These findings are essential for advancing mitigation strategies and enhancing the efficiency of hydrofoil-based systems in environments prone to cavitation.
- 1 January 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (1)
Comparative investigation of cavitating and non-cavitating flows around a two-dimensional hydrofoil using particle image velocimetry
This study presents a thorough comparative analysis of non-cavitating and cavitating flows around a two-dimensional National Advisory Committee for Aeronautics airfoil (NACA) 0012 hydrofoil, focusing on flow behavior at different cavitation numbers while maintaining a constant Reynolds number. The experiments, conducted at Chungnam National University's cavitation tunnel, employ Particle Image Velocimetry to capture and analyze the flow dynamics under both regimes. The Reynolds number ranges from 5.8 × 105 to 7.2 × 105, with cavitation numbers (σ) ranging from 4.2 to 3.1 under cavitating conditions and 8.4 to 6.6 under non-cavitating conditions. The results indicated that cavitation substantially influences flow structures, forming re-entrant jets, intensifying shear zones, and increasing vortex shedding. As the cavitation length expands from 0.05 C to 0.4 C with decreasing σ, regions of heightened shear strain are observed between 0.2 and 0.65 C. The flow under non-cavitating conditions demonstrates smoother, more consistent behavior, with vortices concentrated near the trailing edge beyond 0.5 C. Detailed analyses of vector tracking, Q-criterion, and vorticity further clarify the complex interactions between cavitation and vortex dynamics, providing a comprehensive understanding of cavitating flows' turbulent behaviors and instabilities. This research offers new insights into the impact of cavitation on hydrofoil performance by maintaining a constant velocity while varying cavitation numbers. It contributes to a more profound understanding of cavitation phenomena and their implications for design and performance optimization in marine and industrial applications. These findings are essential for advancing mitigation strategies and enhancing the efficiency of hydrofoil-based systems in environments prone to cavitation.