Oleksandr Yaichuk
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Oleksandr Yaichuk has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Viktor Povorotnii
Ukrainian State University of Science and Technologies
3 shared publications H. I. Tolstikov
1 shared publicationI. H. Tolstikov
1 shared publicationIryna Shcherbyna
Dnipro State Agrarian and Economic University
1 shared publication- Nataliia Karyachenko
Ukrainian State University of Science and Technologies
1 shared publication - Nina Diachenko
Dnipro State Agrarian and Economic University
1 shared publication
Latest Publications
- Open Access
- 3 April 2025
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 2 (1(82)) , 13-18
Perturbation of the first form of oscillations of liquid metallurgical slag in the slag car bowl in transient operating modes
The object of this research is the process of oscillation of liquid metallurgical slag in a slag bowl under the influence of acceleration. The work considers the oscillation processes in bowls used on railway and road slug cars, which differ in design and operating conditions. One of the key problems associated with the transportation of liquid slag is the dynamic instability of the melt, which leads to oscillations and splashing, which can pose a safety threat and reduce the efficiency of the transportation process. In this regard, the study of the dynamics of liquid slag in bowls of various designs is an urgent task aimed at optimizing transportation parameters and developing measures to reduce the risk of slag splashing. Based on the results of numerical modeling, it was established that the nature of the oscillations of liquid slag in the bowl significantly depends on the magnitude of the acceleration, the type of slag and the design of the bowl. In particular, the acceleration ranges at which different oscillation modes are observed, from minor surface disturbances to intensive slag splashing, have been determined. At the same time, the differences in the nature of oscillations for different types of slag and bowl designs lie within the limits determined by their physicochemical properties and geometric parameters. The results obtained allow to conclude that it is possible to develop measures for the operation of slag bowls, as well as their designs, in the direction of reducing the amplitude of liquid slag oscillations, which, in turn, contributes to increasing transportation safety and reducing dynamic loads on the bowl walls. The obtained data can be used in the design of new bowl designs to optimize their shape and internal elements in order to minimize slag oscillations. In addition, the information provided can be useful for metallurgical enterprises to develop effective methods for controlling and monitoring slag stability during transportation.
- 3 April 2025
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 2 (1(82)) , 13-18
Open AccessPerturbation of the first form of oscillations of liquid metallurgical slag in the slag car bowl in transient operating modes
The object of this research is the process of oscillation of liquid metallurgical slag in a slag bowl under the influence of acceleration. The work considers the oscillation processes in bowls used on railway and road slug cars, which differ in design and operating conditions. One of the key problems associated with the transportation of liquid slag is the dynamic instability of the melt, which leads to oscillations and splashing, which can pose a safety threat and reduce the efficiency of the transportation process. In this regard, the study of the dynamics of liquid slag in bowls of various designs is an urgent task aimed at optimizing transportation parameters and developing measures to reduce the risk of slag splashing. Based on the results of numerical modeling, it was established that the nature of the oscillations of liquid slag in the bowl significantly depends on the magnitude of the acceleration, the type of slag and the design of the bowl. In particular, the acceleration ranges at which different oscillation modes are observed, from minor surface disturbances to intensive slag splashing, have been determined. At the same time, the differences in the nature of oscillations for different types of slag and bowl designs lie within the limits determined by their physicochemical properties and geometric parameters. The results obtained allow to conclude that it is possible to develop measures for the operation of slag bowls, as well as their designs, in the direction of reducing the amplitude of liquid slag oscillations, which, in turn, contributes to increasing transportation safety and reducing dynamic loads on the bowl walls. The obtained data can be used in the design of new bowl designs to optimize their shape and internal elements in order to minimize slag oscillations. In addition, the information provided can be useful for metallurgical enterprises to develop effective methods for controlling and monitoring slag stability during transportation.
- Open Access
- 26 December 2024
- Published by SHEI Pryazovskyi State Technical University in Reporter of the Priazovskyi State Technical University. Section: Technical sciences
- Vol. 1 (49) , 127-142
Constructional features and advanced technologies of journal bearings in modern industry
The article is a review and focuses on the analysis of modern materials, designs, and lubrication technologies for plain bearings, which are essential components in mechanical engineering and are used in various industrial equipment, such as turbines, pumps, generators, and compressors. The reliability and longevity of journal bearings are critical issues in modern industry, as their failure can lead to complete equipment shutdown, causing significant economic losses. Depending on operating conditions, journal bearings face challenges related to wear, high temperatures, vibration, and unstable lubrication, necessitating the use of innovative materials, structures, and lubrication methods. This review aims to analyse contemporary materials, bearing designs, and lubrication technologies used in the manufacture of journal bearings. Special attention is given to the use of polymer materials for friction pairs and the effectiveness of low-viscosity lubricants, which enable journal bearings to be used in specialised, high-tech equipment. The review incorporates findings from numerous studies that examine various types of bearings, such as hydrostatic and hydrodynamic, using water and other fluids as lubricants. The practical significance of this review lies in its potential to inform the development of optimised journal bearing designs suited to complex applications that demand high precision, reliability, and operational efficiency. The key findings suggest that the integration of innovative materials, such as polymers, and advanced lubrication methods can significantly enhance wear resistance and operational stability. Furthermore, the implementation of new bearing designs with improved lubrication efficiency and heat dissipation offers promising improvements for the productivity of modern rotating equipment. Research in this area is crucial for advancing more reliable and efficient bearing systems in industry
- 26 December 2024
- Published by SHEI Pryazovskyi State Technical University in Reporter of the Priazovskyi State Technical University. Section: Technical sciences
- Vol. 1 (49) , 127-142
Open AccessConstructional features and advanced technologies of journal bearings in modern industry
The article is a review and focuses on the analysis of modern materials, designs, and lubrication technologies for plain bearings, which are essential components in mechanical engineering and are used in various industrial equipment, such as turbines, pumps, generators, and compressors. The reliability and longevity of journal bearings are critical issues in modern industry, as their failure can lead to complete equipment shutdown, causing significant economic losses. Depending on operating conditions, journal bearings face challenges related to wear, high temperatures, vibration, and unstable lubrication, necessitating the use of innovative materials, structures, and lubrication methods. This review aims to analyse contemporary materials, bearing designs, and lubrication technologies used in the manufacture of journal bearings. Special attention is given to the use of polymer materials for friction pairs and the effectiveness of low-viscosity lubricants, which enable journal bearings to be used in specialised, high-tech equipment. The review incorporates findings from numerous studies that examine various types of bearings, such as hydrostatic and hydrodynamic, using water and other fluids as lubricants. The practical significance of this review lies in its potential to inform the development of optimised journal bearing designs suited to complex applications that demand high precision, reliability, and operational efficiency. The key findings suggest that the integration of innovative materials, such as polymers, and advanced lubrication methods can significantly enhance wear resistance and operational stability. Furthermore, the implementation of new bearing designs with improved lubrication efficiency and heat dissipation offers promising improvements for the productivity of modern rotating equipment. Research in this area is crucial for advancing more reliable and efficient bearing systems in industry
- 1 January 2024
- Published by Institute of Ferrous Metallurgy Z.I. Nekrasova of the National Academy of Sciences of Ukraine in Fundamental and applied problems of ferrous metallurgy
- No. 38
Some features of modeling the research process thermo-stressed bowl for liquid slag transportation
As is known, in metallurgical shops of blast furnace and steelmaking processes, slag carriers are used to drain slag and transport it. The main and most expensive part of a slag carrier is the bowl, which is a steel casting in the form of a thick-walled shell of various configurations. Currently, in blast furnace shops, the most widely used bowls are 16 m3 in volume, based on frames with carriages and moved by biaxial railway-type undercarriages. At the same time, automobile-type slag carriers carrying one bowl began to be introduced at metallurgical enterprises. The average service life of the bowls is insignificant and on average it is 500-1000 fillings, depending on the chemical composition of the slag, its temperature and a number of other factors. The main reasons for the failure of slag bowls are changes in their shape during operation, expressed in the formation of an annular or local narrowing in the area of the support ring, as well as the appearance of longitudinal and transverse cracks in the walls. Automotive-type bowls last much less due to the frequent failure of the axles, by means of which the axle is mounted on the body of the slag carrier. The above defects appear as a result of cyclic thermal effects caused by natural technological processes in the operation of slag carriers. In a solid body, uneven thermal expansion cannot occur freely and causes thermal stresses, which, in combination with mechanical ones from external forces, can cause significant plastic deformations, leading to complete or progressive destruction of the structure. Knowledge of the magnitude and nature of the distribution of thermal stresses is necessary for a comprehensive analysis of the strength of the structure, and in-depth studies of the thermally stressed state of bowls during their operation will make it possible to develop and adopt engineering solutions to increase their service life.
- 1 January 2024
- Published by Institute of Ferrous Metallurgy Z.I. Nekrasova of the National Academy of Sciences of Ukraine in Fundamental and applied problems of ferrous metallurgy
- No. 38
Some features of modeling the research process thermo-stressed bowl for liquid slag transportation
As is known, in metallurgical shops of blast furnace and steelmaking processes, slag carriers are used to drain slag and transport it. The main and most expensive part of a slag carrier is the bowl, which is a steel casting in the form of a thick-walled shell of various configurations. Currently, in blast furnace shops, the most widely used bowls are 16 m3 in volume, based on frames with carriages and moved by biaxial railway-type undercarriages. At the same time, automobile-type slag carriers carrying one bowl began to be introduced at metallurgical enterprises. The average service life of the bowls is insignificant and on average it is 500-1000 fillings, depending on the chemical composition of the slag, its temperature and a number of other factors. The main reasons for the failure of slag bowls are changes in their shape during operation, expressed in the formation of an annular or local narrowing in the area of the support ring, as well as the appearance of longitudinal and transverse cracks in the walls. Automotive-type bowls last much less due to the frequent failure of the axles, by means of which the axle is mounted on the body of the slag carrier. The above defects appear as a result of cyclic thermal effects caused by natural technological processes in the operation of slag carriers. In a solid body, uneven thermal expansion cannot occur freely and causes thermal stresses, which, in combination with mechanical ones from external forces, can cause significant plastic deformations, leading to complete or progressive destruction of the structure. Knowledge of the magnitude and nature of the distribution of thermal stresses is necessary for a comprehensive analysis of the strength of the structure, and in-depth studies of the thermally stressed state of bowls during their operation will make it possible to develop and adopt engineering solutions to increase their service life.