Mei Yang

The advantages of torrefaction preheating, including the production of a hydrophobic solid product, improved particle size distribution, enhanced fuel properties with fewer environmental issues, decreased moisture content, and reduced volatile content. In order to meet the technical requirements of biomass oriented value-added and energy saving and emission reduction, pine sawdust (PS) was taken as the research object, and the physicochemical properties of the PS samples preheated at a low temperature were analyzed by synchronous thermal analysis (TG-DSC), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), and organic element analyzer (EA). The effect of preheating at a lower temperature on the physicochemical properties of PS was discussed. The results showed that, under the preheating condition of 200 °C, compared with PS, the water content of PS-200 decreased by 3.23%, the volatile content decreased by 3.69%, the fixed carbon increased by 6.81%, the calorific value increased by 6.90%, the equilibrium water content decreases from 7.06% to 4.46%, and the hydrophobicity increases. This research, based on the improvement of the quality of agricultural and forestry waste and the promotion of the strategy of converting waste into energy, has contributed to the advancement of sustainable energy production.

This work conducts a single-factor experiment to study the effects of biomass types on the relax density, volume expansion, durability, hydrophobicity, and processing energy consumption. We analyze the differences in the quality of the pellets, and optimize the compaction conditions suitable for different biomass types including straw, hardwood, shell, and herbaceous plant. The results indicated that with a compressing force of 60~1500 N, compressing time of 10 s, powder size of less than 0.5 mm, and moisture content of 10%, the relax densities of corn straw, rice straw, selenium-rich rice straw, weigela japonica branches, and camphor leaves range from 360 to 820 kg/m³, with a processing energy consumption of 17,360 to 28,740 J/kg; meanwhile, the relax densities of argy wormwood, forage grass, green grass, and peanut shells range from 340 to 840 kg/m³, with a processing energy consumption of 33,510 to 73,700 J/kg. Therefore, the compaction pretreatment effectively regulates the density of biomass pellets and reduces the processing energy consumption. This study analyzed the differences in the quality of pellets caused by the inherent characteristics of biomass, providing strong support for the directional depolymerization and enhanced pretreatment technology for the scaled production of biomass alcohol fuels.