Minji Jung
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Minji Jung has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Youngwoo Ji
Hanbat National University
2 shared publications - Hyunwoo Son
School of Electronic Engineering, Engineering Research Institute (ERI), Gyeongsang National University, Jinju-si, South Korea
1 shared publication - Kyeongmin Min
Department of Electronic Engineering, Hanbat National University, Daejeon 34158, Republic of Korea
1 shared publication
Latest Publications
- Open Access
A CMOS Voltage Reference with PTAT Current Using DIBL Compensation for Low Line Sensitivity
This paper presents a low-power CMOS voltage reference with low supply sensitivity, designed and verified in a 180 nm standard CMOS technology. A DIBL-based line-sensitivity (LS) compensation path is incorporated into the conventional PTAT generation circuit to simultaneously provide a reference voltage and a bias current with improved LS. The proposed circuit achieves LS values of 0.01%/V for the voltage reference and 0.07%/V for the bias current reference over a supply voltage range of 1.4 V to 2 V. It generates a reference voltage of 538 mV and a PTAT current of 38 nA, consuming 68 nW. The simulated temperature coefficient is 58 ppm/ from −40 °C to 130 °C, and the power supply rejection ratio is −59 dB at 100 Hz.Open AccessA CMOS Voltage Reference with PTAT Current Using DIBL Compensation for Low Line Sensitivity
This paper presents a low-power CMOS voltage reference with low supply sensitivity, designed and verified in a 180 nm standard CMOS technology. A DIBL-based line-sensitivity (LS) compensation path is incorporated into the conventional PTAT generation circuit to simultaneously provide a reference voltage and a bias current with improved LS. The proposed circuit achieves LS values of 0.01%/V for the voltage reference and 0.07%/V for the bias current reference over a supply voltage range of 1.4 V to 2 V. It generates a reference voltage of 538 mV and a PTAT current of 38 nA, consuming 68 nW. The simulated temperature coefficient is 58 ppm/ from −40 °C to 130 °C, and the power supply rejection ratio is −59 dB at 100 Hz. - Open Access
- 1 February 2025
- Published by MDPI AG in Electronics
- Vol. 14 (3) , 588
A 5-Transistor CMOS Voltage Reference with Double Supply-Regulation
This paper presents an ultra-low-power CMOS voltage reference designed and verified in an 180 nm standard CMOS technology. To achieve DC and AC supply sensitivity under 0.01%/V and −100 dB, it employs a single transistor and two 2-T cores to improve supply immunity with minimal overhead, adding only one drain-to-source voltage for the total supply voltage. The proposed design achieves a line sensitivity of 0.0027%/V in a supply voltage range of 0.5 V to 2 V and consumes 630 pW with a supply voltage of 0.5 V. The simulated temperature coefficient is 12 ppm/°C in a temperature range of −40 °C to 150 °C, and the simulated power supply rejection ratio is −100.5 dB at 100 Hz without requiring any output decoupling capacitor.
- 1 February 2025
- Published by MDPI AG in Electronics
- Vol. 14 (3) , 588
Open AccessA 5-Transistor CMOS Voltage Reference with Double Supply-Regulation
This paper presents an ultra-low-power CMOS voltage reference designed and verified in an 180 nm standard CMOS technology. To achieve DC and AC supply sensitivity under 0.01%/V and −100 dB, it employs a single transistor and two 2-T cores to improve supply immunity with minimal overhead, adding only one drain-to-source voltage for the total supply voltage. The proposed design achieves a line sensitivity of 0.0027%/V in a supply voltage range of 0.5 V to 2 V and consumes 630 pW with a supply voltage of 0.5 V. The simulated temperature coefficient is 12 ppm/°C in a temperature range of −40 °C to 150 °C, and the simulated power supply rejection ratio is −100.5 dB at 100 Hz without requiring any output decoupling capacitor.