ZZZhong Zheng

Zhong Zheng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Zhong Zheng has a total of 43 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Contact and Non-Contact Ultrasound-Assisted Metal Additive Manufacturing: Recent Progress in Melt-Pool Control

    by Nuo Xu, Bo Yuan, Zhong Zheng, Wenting Ouyang, Bowen Gong, Likun Wang, Sainan Ma, Zhanxing Chen, Xinfang Zhang, Qiuwei Xing, et al.

    Ultrasound-assisted metal additive manufacturing (U-FAAM) has emerged as a promising in situ melt-pool regulation strategy for addressing the challenges of conventional metal additive manufacturing, including process instability, defect formation, and microstructural anisotropy. This review systematically summarizes recent progress in contact and non-contact ultrasound-assisted metal additive manufacturing from the perspective of acoustic energy delivery pathways. The interactions between ultrasonic excitation and melt-pool behavior, thermal transport, solidification-front evolution, defect formation, microstructural transformation, and mechanical performance are comprehensively discussed. Contact ultrasound approaches transmit acoustic energy through solid media. Cavitation can occur only when the melt-side acoustic pressure reaches the required threshold; under such conditions, cavitation-associated effects may act with acoustic streaming and inertial melt flow to enhance mixing, grain refinement, and defect mitigation. Non-contact ultrasound approaches provide improved geometric adaptability and mainly influence melt-pool evolution through acoustic streaming and cyclic pressure fluctuations. The relationships among ultrasonic input conditions, melt-side responses, solidification behavior, and final properties are critically analyzed. Furthermore, current limitations associated with acoustic energy attenuation, coupling efficiency, process scalability, and quantitative characterization of ultrasonic effects within the melt pool are highlighted. This review synthesizes current evidence for ultrasound-driven melt-pool control in the investigated fusion-based AM systems, particularly DED/LDED and WAAM, while recognizing the limited evidence for LPBF.

  • Open Access

    Induction Heating-Assisted Directed Energy Deposition: Enhancing Static Passivity and Degrading Dynamic Tribocorrosion Resistance of FeCrNiNb0.4Mo0.1 High-Entropy Alloy

    by Zhongsheng Chen, Yingping Ji, Rui Zeng, Baohua Nie, Fangjun Liu, Dongchu Chen, Zhong Zheng, Zhongqiang Liu, Daishu Qian

    In this study, FeCrNiNb0.4Mo0.1 eutectic high-entropy alloy coatings were fabricated by conventional directed energy deposition (DED) and induction heating-assisted directed energy deposition (IHS-DED). The effects of induction heating on microstructural evolution, mechanical properties, static corrosion behavior, and dynamic tribocorrosion response in 3.5 wt.% NaCl solution were systematically investigated. The introduction of induction heating reduced the cooling rate and prolonged the thermal cycle, promoting microstructural and compositional homogenization. As a result, the IHS-DED alloy exhibited improved static corrosion resistance, as reflected by lower corrosion current density, higher charge-transfer resistance, and reduced passive-film donor density. However, under sliding tribocorrosion conditions, the conventional DED alloy showed better damage resistance. This behavior was associated with its finer lamellar eutectic structure, higher hardness, and stronger resistance to mechanically induced deformation and material removal. OCP monitoring further revealed distinct dynamic electrochemical responses: the DED alloy showed a more stable OCP response with a positive shift during sliding, whereas the IHS-DED alloy displayed a negative shift accompanied by repeated fluctuations, suggesting more frequent depassivation-repassivation events. These results indicate that static corrosion resistance cannot be directly extrapolated to dynamic tribocorrosion performance. The tribocorrosion behavior of FeCrNiNb0.4Mo0.1 eutectic high-entropy alloy coatings is governed by the combined effects of passive-film stability, microstructural refinement, hardness, and dynamic electrochemical response.

  • Open Access

    Microstructure and mechanical properties of CoNiV reinforced aluminum matrix composites: correlation between tensile fracture behavior and core-shell interface

    by Rui Zeng, Yingping Ji, Zhongsheng Chen, Baohua Nie, Fangjun Liu, Zhong Zheng, Bin-Qing Shi, Dongchu Chen, Xiangpeng Gong, Yucheng Ji, et al.

    In this study, CoNiV-reinforced AMCs were fabricated by spark plasma sintering at 475°C and 500°C. The results show that, at 475°C, only a thin Al(Co, Ni, V) solid solution forms at the interface, whereas at 500°C, a continuous Al₃(Co, Ni, V) intermetallic layer with a thickness of 5–8 μm is formed. This intermetallic phase endows the composite with excellent strength–ductility synergy, resulting in increases of approximately 155% in ultimate tensile strength and 167% in elongation to fracture. In the 475°C sample, cracks preferentially initiate at interfacial defects and propagate along the interface between the Al matrix and CoNiV particles, exhibiting a distinct crack path. In contrast, in the 500°C sample, cracks tend to nucleate at the interface between the core-shell structure and the Al matrix, propagating along weakly bonded regions, which results in a more tortuous crack path. On this basis, a comparison between the MD-based core-shell model and the shell-free model reveals that the core-shell model is more prone to the formation of voids and micro-cracks during tensile deformation. However, intermetallic phases enhance the material's performance by impeding void growth and crack coalescence; they achieve this by increasing the tortuosity of crack paths, hindering dislocation motion, and promoting stress transfer across interfaces. These findings providing guidance for interfacial design and property optimization.

  • Enhanced mechanical properties of GNPs/Al composites with a screw shell-like fracture surface

    by Zhong Zheng, Huiyao Huang, Siqi Chen, Dongchu Chen, Baohua Nie, Yulu Yang, Binqing Shi, Bo Yuan, Xiang Gao


  • Open Access

    Numerical Investigation on Effect of Chamfering on Mechanical Behaviors in Continuous Network Composite

    by Tao Li, Tianzi Wang, Jianchao Li, Cheng Liu, Bowen Gong, Wenting Ouyang, Likun Wang, Sainan Ma, Zhong Zheng, Bo Yuan, et al.

    The network architecture has demonstrated considerable potential for enhancing the strength–ductility synergy in metal matrix composites (MMCs). Intuitively, the intersections of network layers are expected to induce a stress concentration, leading to premature brittle fractures. Introducing chamfers to round the network cells may mitigate the local stress concentration and thereby improve elongation. Here, a numerical simulation framework was developed to investigate the effect of chamfering on the mechanical behavior of a three-dimensional (3D) continuous SiC3D/Al composite with a network architecture. A Voronoi tessellation algorithm was employed to generate the continuous network structural SiC phase. By inducing ductile and brittle damage criterions in the matrix and reinforcement elements, respectively, the mechanical behavior can be predicted via the finite element method (FEM). The predicted mechanical properties reveal an unexpected trend: chamfering results in a simultaneous reduction in both strength (from 367 MPa to 312 MPa) and elongation (from 4.1% to 2.0%). With chamfering, the enlarged intersection of the network layer bears a lower load, whereas the narrower network plates exhibit higher stress concentrations. As a result, the overall load-bearing capacity of the SiC3D reinforcement decreases monotonically with an increasing chamfer size f. Furthermore, the non-uniform stress distribution promotes the premature fracture of the SiC3D, which reduces elongation. Additionally, the crack deflection behavior is suppressed in the chamfered models, leading to decreasing energy dissipation. This unanticipated outcome highlights an important architectural design principle: maintaining uniform geometric dimensions is critical for achieving optimal composite performance.