Haorui Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Haorui Liu has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Nana Yang
School of Materials Engineering, Longdong University, Qingyang 745000, China
4 shared publications - Chenchen Feng
State Key Laboratory of Advanced Processing and Recycling of Non-Ferrous Metals, School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou 730050, China
3 shared publications Nana Yang
School of Materials Engineering, Longdong University, Qingyang 745000, China
3 shared publicationsNing Mi
School of Materials Engineering, Longdong University, Qingyang, 745000, China
3 shared publications- Qi Zhou
State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Lanzhou University of Technology, Lanzhou, 730050, Gansu, China
3 shared publications Dekai Ouyang
School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou, 730050, Gansu, China
2 shared publications
Latest Publications
- Open Access
- 17 June 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (12) , 761
Co-Doped Nanoporous Fe3P Self-Supported Electrodes for Enhanced Alkaline Hydrogen Evolution
Transition-metal phosphides are promising non-noble-metal electrocatalysts for alkaline hydrogen evolution, yet further improving their performance remains challenging. In this work, a Co-doped nanoporous Fe3P self-supported electrode was fabricated by vacuum high-frequency induction and melt spinning of Fe75Co5P20 precursor alloys, followed by electrochemical dealloying. Nanoporous Fe3P prepared from Fe80P20 was used as the reference. Structural analyses show that dealloying selectively removes the α-Fe phase while preserving the Fe3P framework, resulting in a three-dimensional nanoporous architecture. XPS results further confirm successful Co incorporation and reveal that Co doping modifies the local chemical environment of Fe and P. Benefiting from the combined effects of Co incorporation and the nanoporous structure, np-Co-Fe3P exhibits significantly improved HER performance in 1.0 M KOH, requiring only 70 mV to reach 10 mA cm−2, much lower than that of np-Fe3P (199 mV). In addition, np-Co-Fe3P shows a smaller Tafel slope of 94 mV dec−1, lower charge-transfer resistance, and a larger double-layer capacitance of 109.4 mF cm−2. This work demonstrates an effective strategy for enhancing the alkaline HER performance of Fe-based phosphides through the combination of Co incorporation and dealloying-derived nanoporous architecture.
- 17 June 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (12) , 761
Open AccessCo-Doped Nanoporous Fe3P Self-Supported Electrodes for Enhanced Alkaline Hydrogen Evolution
Transition-metal phosphides are promising non-noble-metal electrocatalysts for alkaline hydrogen evolution, yet further improving their performance remains challenging. In this work, a Co-doped nanoporous Fe3P self-supported electrode was fabricated by vacuum high-frequency induction and melt spinning of Fe75Co5P20 precursor alloys, followed by electrochemical dealloying. Nanoporous Fe3P prepared from Fe80P20 was used as the reference. Structural analyses show that dealloying selectively removes the α-Fe phase while preserving the Fe3P framework, resulting in a three-dimensional nanoporous architecture. XPS results further confirm successful Co incorporation and reveal that Co doping modifies the local chemical environment of Fe and P. Benefiting from the combined effects of Co incorporation and the nanoporous structure, np-Co-Fe3P exhibits significantly improved HER performance in 1.0 M KOH, requiring only 70 mV to reach 10 mA cm−2, much lower than that of np-Fe3P (199 mV). In addition, np-Co-Fe3P shows a smaller Tafel slope of 94 mV dec−1, lower charge-transfer resistance, and a larger double-layer capacitance of 109.4 mF cm−2. This work demonstrates an effective strategy for enhancing the alkaline HER performance of Fe-based phosphides through the combination of Co incorporation and dealloying-derived nanoporous architecture.
- 16 June 2026
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 50 (27) , 11430-11437
Three-dimensional assemblies of nitrogen-rich polymeric carbon nitride microrods for enhanced photocatalytic hydrogen generation
Supramolecular self-assembly is a typical non-template strategy for fabricating carbon nitride photocatalysts with tailored microstructures and optimized properties. However, current research in this field is predominantly confined to triazine-based molecules such as melamine-cyanuric acid supramolecular aggregates, which severely restricts the structural diversity and functional tunability of carbon nitride photocatalysts. Herein, we report a novel approach to synthesize nitrogen-rich polymeric carbon nitride microrods (NPCNm) via supramolecular assembly of intermediates derived from melamine and 3-amino-1,2,4triazole respectively. Owing to their high structural similarity, the two kinds of intermediates can form a longrange ordered microrod-like morphology through hydrogen bonding interactions between the nitrogen and hydrogen atoms at the edges of their molecular frameworks. This well-defined microrod architecture is robustly preserved throughout the subsequent hydrothermal treatment, freeze-drying, and calcination steps, ultimately remaining intact in the final NPCNm product. Benefiting from the synergistic effects of the microrodlike morphology and triazole-induced asymmetric structure modification, including enhanced visible light absorption and efficient charge carriers separation, NPCNm achieves a superior H2 evolution rate of 3085 μmol g -1 h -1 under visible light (λ > 420 nm), which is 23.4-fold and 11.6-fold higher than those of the carbon nitride counterparts derived from one-step calcination of melamine and 3-amino-1,2,4-triazole, respectively. This work expands the scope of supramolecular assembly for carbon nitride synthesis using atypical monomers to develop highly efficient solar-to-chemical conversion catalysts.
- 16 June 2026
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 50 (27) , 11430-11437
Three-dimensional assemblies of nitrogen-rich polymeric carbon nitride microrods for enhanced photocatalytic hydrogen generation
Supramolecular self-assembly is a typical non-template strategy for fabricating carbon nitride photocatalysts with tailored microstructures and optimized properties. However, current research in this field is predominantly confined to triazine-based molecules such as melamine-cyanuric acid supramolecular aggregates, which severely restricts the structural diversity and functional tunability of carbon nitride photocatalysts. Herein, we report a novel approach to synthesize nitrogen-rich polymeric carbon nitride microrods (NPCNm) via supramolecular assembly of intermediates derived from melamine and 3-amino-1,2,4triazole respectively. Owing to their high structural similarity, the two kinds of intermediates can form a longrange ordered microrod-like morphology through hydrogen bonding interactions between the nitrogen and hydrogen atoms at the edges of their molecular frameworks. This well-defined microrod architecture is robustly preserved throughout the subsequent hydrothermal treatment, freeze-drying, and calcination steps, ultimately remaining intact in the final NPCNm product. Benefiting from the synergistic effects of the microrodlike morphology and triazole-induced asymmetric structure modification, including enhanced visible light absorption and efficient charge carriers separation, NPCNm achieves a superior H2 evolution rate of 3085 μmol g -1 h -1 under visible light (λ > 420 nm), which is 23.4-fold and 11.6-fold higher than those of the carbon nitride counterparts derived from one-step calcination of melamine and 3-amino-1,2,4-triazole, respectively. This work expands the scope of supramolecular assembly for carbon nitride synthesis using atypical monomers to develop highly efficient solar-to-chemical conversion catalysts.
- Open Access
Self-Supported Nanoporous High-Entropy Alloy Electrodes with W-Modulated Surface Reconstruction for Alkaline Hydrogen Evolution
Efficient and durable non-noble catalysts are crucial for alkaline hydrogen evolution (HER), and high-entropy alloys (HEAs) offer a promising platform due to their multicomponent synergy and tunable surface chemistry. Herein, self-supported nanoporous high-entropy alloy electrodes, Fe35Co25Ni30Mo10 and Fe35Co25Ni30Mo7W3, were prepared by arc melting followed by electrochemical dealloying in 1 M HCl. XRD results show that both alloys retain an FCC framework after dealloying, whereas SEM reveals that W promotes a more continuous sponge-like nanoporous structure. In 1 M KOH, dealloyed Fe35Co25Ni30Mo7W3 shows enhanced HER activity, requiring an overpotential of 178 mV at 10 mA cm−2, which is lower than that of dealloyed Fe35Co25Ni30Mo10 and the precursors. Dealloyed Fe35Co25Ni30Mo7W3 also exhibits faster kinetics (Tafel slope 98.5 mV dec−1; Rct 3.33 Ω) and a larger Cdl (19.2 mF cm−2) than dealloyed Fe35Co25Ni30Mo10. These results highlight W-enabled dealloying-induced reconstruction as an effective route to robust nanoporous HEA electrodes for alkaline HER.
Open AccessSelf-Supported Nanoporous High-Entropy Alloy Electrodes with W-Modulated Surface Reconstruction for Alkaline Hydrogen Evolution
Efficient and durable non-noble catalysts are crucial for alkaline hydrogen evolution (HER), and high-entropy alloys (HEAs) offer a promising platform due to their multicomponent synergy and tunable surface chemistry. Herein, self-supported nanoporous high-entropy alloy electrodes, Fe35Co25Ni30Mo10 and Fe35Co25Ni30Mo7W3, were prepared by arc melting followed by electrochemical dealloying in 1 M HCl. XRD results show that both alloys retain an FCC framework after dealloying, whereas SEM reveals that W promotes a more continuous sponge-like nanoporous structure. In 1 M KOH, dealloyed Fe35Co25Ni30Mo7W3 shows enhanced HER activity, requiring an overpotential of 178 mV at 10 mA cm−2, which is lower than that of dealloyed Fe35Co25Ni30Mo10 and the precursors. Dealloyed Fe35Co25Ni30Mo7W3 also exhibits faster kinetics (Tafel slope 98.5 mV dec−1; Rct 3.33 Ω) and a larger Cdl (19.2 mF cm−2) than dealloyed Fe35Co25Ni30Mo10. These results highlight W-enabled dealloying-induced reconstruction as an effective route to robust nanoporous HEA electrodes for alkaline HER.
- Open Access
- 26 September 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (43) , 35728-35738
Preparation of a nanoporous CoFe2O4/CoMoO4 composite electrode material and a study on its performance in water electrolysis
A CoFe2O4/CoMoO4 composite was prepared hydrothermally. It showed excellent HER (193 mV@50 mA cm−2) and OER (319 mV) performance. Overall water splitting required 1.55 V@10 mA cm−2 with strong 12h stability.
- 26 September 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (43) , 35728-35738
Open AccessPreparation of a nanoporous CoFe2O4/CoMoO4 composite electrode material and a study on its performance in water electrolysis
A CoFe2O4/CoMoO4 composite was prepared hydrothermally. It showed excellent HER (193 mV@50 mA cm−2) and OER (319 mV) performance. Overall water splitting required 1.55 V@10 mA cm−2 with strong 12h stability.
- Open Access
- 17 September 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (41) , 34600-34608
Tribological behavior of high-entropy alloy FeNiCrMn: a molecular dynamics simulation study
Molecular dynamics simulations reveal that in FeNiCrMn high-entropy alloy, friction coefficient is depth-dependent, yet insensitive to crystallographic orientation and sliding velocity.
- 17 September 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (41) , 34600-34608
Open AccessTribological behavior of high-entropy alloy FeNiCrMn: a molecular dynamics simulation study
Molecular dynamics simulations reveal that in FeNiCrMn high-entropy alloy, friction coefficient is depth-dependent, yet insensitive to crystallographic orientation and sliding velocity.
- 28 August 2025
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 49 (39) , 17056-17061
Triazine-based cationic organic networks with anion-exchange dominance for high-capacity chromate remediation
Two novel triazine-based cationic organic network materials were successfully synthesized via quaternization. Both materials exhibited excellent adsorption performance and remarkable recyclability in the removal of CrO 4 2− .
- 28 August 2025
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 49 (39) , 17056-17061
Triazine-based cationic organic networks with anion-exchange dominance for high-capacity chromate remediation
Two novel triazine-based cationic organic network materials were successfully synthesized via quaternization. Both materials exhibited excellent adsorption performance and remarkable recyclability in the removal of CrO 4 2− .
- 20 May 2025
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 49 (24) , 10493-10504
Enhanced charge separation in a CoO x @CdS core–shell heterostructure by photodeposited amorphous CoO x for highly efficient hydrogen production
A CoO x @CdS core–shell hererostructure is constructed by photodeposited CoO x on the CdS for highly efficient photocatalytic hydrogen production. The resultant 2%CoO x @CdS exhibits the highest photocatalytic activity and outstanding photostability.
- 20 May 2025
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 49 (24) , 10493-10504
Enhanced charge separation in a CoO x @CdS core–shell heterostructure by photodeposited amorphous CoO x for highly efficient hydrogen production
A CoO x @CdS core–shell hererostructure is constructed by photodeposited CoO x on the CdS for highly efficient photocatalytic hydrogen production. The resultant 2%CoO x @CdS exhibits the highest photocatalytic activity and outstanding photostability.
- Open Access
- 19 April 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (8) , 624
Molecular Dynamics Simulation of the Dynamic Mechanical Behavior of FeNiCrMn High-Entropy Alloy
High-entropy alloys (HEAs) exhibit excellent properties such as high strength, good ductility, superior corrosion resistance, and thermal stability, making them highly promising for applications in the aerospace, energy, and automotive industries. Among them, the FeNiCrMn HEA demonstrates outstanding corrosion resistance while eliminating the expensive Co element present in the “Cantor” alloy, significantly reducing costs. However, current research on the FeNiCrMn HEA has primarily focused on its corrosion resistance, with relatively limited studies on its mechanical properties. This paper investigated the effects of different crystal orientations, temperatures, and strain rates on the mechanical properties and plastic deformation mechanisms of an equiatomic FeNiCrMn HEA using molecular dynamics simulations. The results revealed that the FeNiCrMn HEA exhibited significant anisotropy under loading along different orientations, with the maximum yield stress observed along the direction. During the elastic stage, all crystals maintained a single FCC structure. As strain increased, yielding occurred, accompanied by a sudden drop in stress, which was attributed to the generation of dislocations. The mechanical properties of the FeNiCrMn HEA were highly sensitive to temperature variations. Elevated temperatures intensify atomic thermal vibrations, making it easier for atoms to deviate from their equilibrium positions and facilitating dislocation nucleation and movement. Consequently, the yield strength and yield strain decreased with increasing temperature. In contrast, the yield strength of the FeNiCrMn HEA was relatively insensitive to strain rate variations. Instead, the strain rate primarily affected the alloy’s flow stress. During tensile loading, higher strain rates led to higher dislocation densities. When the stress stabilized, the flow stress increased with the strain rate. These findings provide a theoretical foundation for the future development of FeNiCrMn HEAs.
- 19 April 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (8) , 624
Open AccessMolecular Dynamics Simulation of the Dynamic Mechanical Behavior of FeNiCrMn High-Entropy Alloy
High-entropy alloys (HEAs) exhibit excellent properties such as high strength, good ductility, superior corrosion resistance, and thermal stability, making them highly promising for applications in the aerospace, energy, and automotive industries. Among them, the FeNiCrMn HEA demonstrates outstanding corrosion resistance while eliminating the expensive Co element present in the “Cantor” alloy, significantly reducing costs. However, current research on the FeNiCrMn HEA has primarily focused on its corrosion resistance, with relatively limited studies on its mechanical properties. This paper investigated the effects of different crystal orientations, temperatures, and strain rates on the mechanical properties and plastic deformation mechanisms of an equiatomic FeNiCrMn HEA using molecular dynamics simulations. The results revealed that the FeNiCrMn HEA exhibited significant anisotropy under loading along different orientations, with the maximum yield stress observed along the direction. During the elastic stage, all crystals maintained a single FCC structure. As strain increased, yielding occurred, accompanied by a sudden drop in stress, which was attributed to the generation of dislocations. The mechanical properties of the FeNiCrMn HEA were highly sensitive to temperature variations. Elevated temperatures intensify atomic thermal vibrations, making it easier for atoms to deviate from their equilibrium positions and facilitating dislocation nucleation and movement. Consequently, the yield strength and yield strain decreased with increasing temperature. In contrast, the yield strength of the FeNiCrMn HEA was relatively insensitive to strain rate variations. Instead, the strain rate primarily affected the alloy’s flow stress. During tensile loading, higher strain rates led to higher dislocation densities. When the stress stabilized, the flow stress increased with the strain rate. These findings provide a theoretical foundation for the future development of FeNiCrMn HEAs.
- 18 January 2025
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 49 (8) , 3119-3127
Heterostructure MoS 2 /NiS supported on 3D nano-porous Ni as a highly efficient electrocatalyst for overall water splitting
A three-dimensional nano-porous Ni-supported heterostructure MoS 2 /NiS was prepared using one-pot hydrothermal method combined with dealloying as an efficient electrocatalyst for integral water decomposition.
- 18 January 2025
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 49 (8) , 3119-3127
Heterostructure MoS 2 /NiS supported on 3D nano-porous Ni as a highly efficient electrocatalyst for overall water splitting
A three-dimensional nano-porous Ni-supported heterostructure MoS 2 /NiS was prepared using one-pot hydrothermal method combined with dealloying as an efficient electrocatalyst for integral water decomposition.
- Open Access
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Successional Heterostructure Mos2-Ni3s2 Nanospheres Based on 3d Nano-Porous Ni: An Efficient Electrocatalyst for Overall Water Splitting
A rich reserve, low-cost electrocatalyst with high-efficiency catalytic activity is supposed to be a promising substitute for Pt-based noble metal electrocatalysts. Herein, we produced a heterostructure MoS2-Ni3S2 nanosphere on 3D nano-porous Ni through a novel synthetic strategy. Benefiting from the unique nanospherical heterostructure MoS2-Ni3S2 catalyst exhibits relatively low overpotentials of η10 = 109 mV and Tafel slope of 81 mV dec-1 for HER, η10 = 130 mV and 91 mV dec-1 for OER. Using heterostructure MoS2-Ni3S2 as bifunctional electrocatalysts, a low cell voltage of 1.49 V was required to reach a current density of 10 mA cm-2. The outstanding performance of heterostructure MoS2-Ni3S2 is attributed to the fast charge transfer channel offered by the interface between MoS2 and Ni3S2 as well as the large surface area provided by the nanospherical structure. This work elaborates a feasible measure to realize the non-noble and high-efficiency electrocatalysts and is instructive for the design of interface engineering and nanostructures.
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Open AccessSuccessional Heterostructure Mos2-Ni3s2 Nanospheres Based on 3d Nano-Porous Ni: An Efficient Electrocatalyst for Overall Water Splitting
A rich reserve, low-cost electrocatalyst with high-efficiency catalytic activity is supposed to be a promising substitute for Pt-based noble metal electrocatalysts. Herein, we produced a heterostructure MoS2-Ni3S2 nanosphere on 3D nano-porous Ni through a novel synthetic strategy. Benefiting from the unique nanospherical heterostructure MoS2-Ni3S2 catalyst exhibits relatively low overpotentials of η10 = 109 mV and Tafel slope of 81 mV dec-1 for HER, η10 = 130 mV and 91 mV dec-1 for OER. Using heterostructure MoS2-Ni3S2 as bifunctional electrocatalysts, a low cell voltage of 1.49 V was required to reach a current density of 10 mA cm-2. The outstanding performance of heterostructure MoS2-Ni3S2 is attributed to the fast charge transfer channel offered by the interface between MoS2 and Ni3S2 as well as the large surface area provided by the nanospherical structure. This work elaborates a feasible measure to realize the non-noble and high-efficiency electrocatalysts and is instructive for the design of interface engineering and nanostructures.