Hyginus Chidiebere Onyekachi Unegbu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hyginus Chidiebere Onyekachi Unegbu has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
B. Dan-Asabe
Department of Mechanical Engineering, Ahmadu Bello University, Zaria, Nigeria
15 shared publicationsA. A. Alabi
Department of Mechanical Engineering, Ahmadu Bello University, Zaria, Nigeria
13 shared publicationsD. S. Yawas
Department of Mechanical Engineering, Ahmadu Bello University, Zaria, Nigeria
13 shared publicationsBashar Dan-Asabe
Department of Mechanical Engineering, Faculty of Engineering, Ahmadu Bello University, Nigeria
9 shared publicationsAbdulmumin Akoredeley Alabi
Department of Mechanical Engineering, Faculty of Engineering, Ahmadu Bello University, Nigeria
8 shared publicationsDanjuma Yawas
Department of Mechanical Engineering Ahmadu Bello University Zaria Nigeria
6 shared publications
Latest Publications
- Open Access
- 20 July 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Modeling the enablers and barriers to circular economy integration in Nigeria’s construction industry: a structural equation approach
- 20 July 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessModeling the enablers and barriers to circular economy integration in Nigeria’s construction industry: a structural equation approach
- Open Access
- 19 December 2025
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Evaluating the effectiveness of green roofs and walls in Nigeria’s urban centers: a mixed-methods approach
This study evaluated the effectiveness of green roofs and walls in Nigerian urban centers, focusing on their environmental, economic, and social benefits. Utilizing a mixed-method research approach, the research integrated quantitative surveys and qualitative interviews to provide a comprehensive analysis. The quantitative strand involved a survey of 1000 residents from Lagos, Abuja, and Port Harcourt, while the qualitative strand included in-depth interviews with 30 urban planners, architects, and environmental scientists. Data were analyzed using descriptive statistics, t-tests, ANOVA, and multiple regression analyses for the quantitative data, and thematic analysis for the qualitative data. The findings reveal significant environmental benefits, including reduced urban heat island effects and improved air quality. Economically, green roofs and walls contribute to energy savings and increased property values, although high installation costs and maintenance challenges were noted as barriers. Socially, these infrastructures enhance mental well-being and community engagement, though the degree of support varied. Despite these barriers, the positive perceptions and reported benefits suggest a strong potential for green roofs and walls to contribute to sustainable urban development in Nigeria. Comparative analysis with global case studies revealed that the benefits observed in Nigerian cities are consistent with international findings. The study underscores the need for targeted policy interventions, financial incentives, and public awareness campaigns to overcome the identified barriers. Addressing these challenges can harness the full potential of green roofs and walls, contributing to more sustainable and livable urban environments in Nigerian cities.
- 19 December 2025
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessEvaluating the effectiveness of green roofs and walls in Nigeria’s urban centers: a mixed-methods approach
This study evaluated the effectiveness of green roofs and walls in Nigerian urban centers, focusing on their environmental, economic, and social benefits. Utilizing a mixed-method research approach, the research integrated quantitative surveys and qualitative interviews to provide a comprehensive analysis. The quantitative strand involved a survey of 1000 residents from Lagos, Abuja, and Port Harcourt, while the qualitative strand included in-depth interviews with 30 urban planners, architects, and environmental scientists. Data were analyzed using descriptive statistics, t-tests, ANOVA, and multiple regression analyses for the quantitative data, and thematic analysis for the qualitative data. The findings reveal significant environmental benefits, including reduced urban heat island effects and improved air quality. Economically, green roofs and walls contribute to energy savings and increased property values, although high installation costs and maintenance challenges were noted as barriers. Socially, these infrastructures enhance mental well-being and community engagement, though the degree of support varied. Despite these barriers, the positive perceptions and reported benefits suggest a strong potential for green roofs and walls to contribute to sustainable urban development in Nigeria. Comparative analysis with global case studies revealed that the benefits observed in Nigerian cities are consistent with international findings. The study underscores the need for targeted policy interventions, financial incentives, and public awareness campaigns to overcome the identified barriers. Addressing these challenges can harness the full potential of green roofs and walls, contributing to more sustainable and livable urban environments in Nigerian cities.
- Open Access
- 4 December 2025
- Published by Lembaga Penelitian dan Pengabdian kepada Masyarakat Universitas Lampung in Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering)
- Vol. 14 (6) , 2297-2315
Ergonomic Redesign of Farm Tools to Reduce Musculoskeletal Disorders among Nigerian Farmers
The persistent prevalence of musculoskeletal disorders (MSDs) among Nigerian smallholder farmers remains a critical occupational health challenge, largely due to the prolonged use of poorly designed manual farm tools. This study investigated the ergonomic redesign of traditional hoes and cutlasses using a simulation-augmented, mixed-method experimental design aimed at reducing biomechanical stress and enhancing task efficiency. A total of 220 farmers (aged 18–65, with gender-balanced representation) from southwestern Nigeria participated in the study, ensuring population diversity and practical relevance. Redesign was guided by computer-aided design (CAD) modelling, finite element analysis (FEA), and field-collected anthropometric datasets. Key ergonomic indicators included Rapid Entire Body Assessment (REBA) for postural risk, surface electromyography (EMG) for muscle fatigue, task completion time, and the Borg Rating of Perceived Exertion (RPE) for perceived effort. Results showed statistically significant improvements (p < 0.01) across all performance metrics. REBA scores decreased from high to moderate/low risk categories, EMG activity reduced by over 30%, and task completion time improved by 33–36%. RPE scores were halved, indicating increased user comfort. Effect sizes (Cohen’s d > 1.2) confirmed the strong practical impact of the redesigned tools. While limited by short-term field exposure and a regional study scope, the research offers a replicable model for ergonomic tool development in informal agricultural systems. The findings support actionable interventions such as standardised tool design guidelines, local manufacturing protocols, and farmer training programmes. This study demonstrates that ergonomic simulation using CAD and biomechanical tools can lead to meaningful reductions in MSD risk, improved task performance, and higher usability in resource-limited farming environments.
- 4 December 2025
- Published by Lembaga Penelitian dan Pengabdian kepada Masyarakat Universitas Lampung in Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering)
- Vol. 14 (6) , 2297-2315
Open AccessErgonomic Redesign of Farm Tools to Reduce Musculoskeletal Disorders among Nigerian Farmers
The persistent prevalence of musculoskeletal disorders (MSDs) among Nigerian smallholder farmers remains a critical occupational health challenge, largely due to the prolonged use of poorly designed manual farm tools. This study investigated the ergonomic redesign of traditional hoes and cutlasses using a simulation-augmented, mixed-method experimental design aimed at reducing biomechanical stress and enhancing task efficiency. A total of 220 farmers (aged 18–65, with gender-balanced representation) from southwestern Nigeria participated in the study, ensuring population diversity and practical relevance. Redesign was guided by computer-aided design (CAD) modelling, finite element analysis (FEA), and field-collected anthropometric datasets. Key ergonomic indicators included Rapid Entire Body Assessment (REBA) for postural risk, surface electromyography (EMG) for muscle fatigue, task completion time, and the Borg Rating of Perceived Exertion (RPE) for perceived effort. Results showed statistically significant improvements (p < 0.01) across all performance metrics. REBA scores decreased from high to moderate/low risk categories, EMG activity reduced by over 30%, and task completion time improved by 33–36%. RPE scores were halved, indicating increased user comfort. Effect sizes (Cohen’s d > 1.2) confirmed the strong practical impact of the redesigned tools. While limited by short-term field exposure and a regional study scope, the research offers a replicable model for ergonomic tool development in informal agricultural systems. The findings support actionable interventions such as standardised tool design guidelines, local manufacturing protocols, and farmer training programmes. This study demonstrates that ergonomic simulation using CAD and biomechanical tools can lead to meaningful reductions in MSD risk, improved task performance, and higher usability in resource-limited farming environments.
- 1 December 2025
- Published by Faculty of Technical Sciences in Journal of Production Engineering
- Vol. 28 (2) , 32-41
Impact behavior of kevlar-epoxy composites: the effect of aluminium oxynitride reinforcement
This study investigates the impact performance of Kevlar–epoxy composites reinforced with aluminium oxynitride (AlON) nanoparticles, aiming to optimize energy absorption and damage resistance. To address gaps in current research, composites with AlON concentrations of 0%, 2%, 5%, and 10% were fabricated using vacuum-assisted resin transfer molding (VARTM). Impact tests conducted in accordance with ASTM D7136 standards evaluated the composites’ response to high-energy impacts. The results demonstrated that the inclusion of AlON significantly enhanced the impact resistance of the composites, with the 5% AlON variant showing a 39% improvement in absorbed energy compared to the unreinforced baseline. This increase in toughness was primarily attributed to crack deflection and bridging mechanisms provided by the well-dispersed AlON particles. However, at 10% AlON, particle agglomeration introduced stress concentrations, leading to reduced performance gains. Comprehensive analysis using scanning electron microscopy (SEM) and ultrasonic C-scan imaging revealed reduced delamination areas, minimized matrix cracking, and improved homogeneity of AlON dispersion in the 5% composite. These findings included a 35% reduction in delamination area compared to the control, underscoring the effectiveness of the 5% AlON reinforcement. Response surface methodology (RSM) further validated that 5% AlON was the optimal reinforcement level, offering the best balance between impact resistance and material stability. Overall, AlON-reinforced Kevlar–epoxy composites—particularly those containing 5% AlON—exhibit strong potential for lightweight, high-impact applications. Future research should investigate their environmental durability under extreme conditions, including thermal cycling and moisture exposure, to ensure long-term performance.
- 1 December 2025
- Published by Faculty of Technical Sciences in Journal of Production Engineering
- Vol. 28 (2) , 32-41
Impact behavior of kevlar-epoxy composites: the effect of aluminium oxynitride reinforcement
This study investigates the impact performance of Kevlar–epoxy composites reinforced with aluminium oxynitride (AlON) nanoparticles, aiming to optimize energy absorption and damage resistance. To address gaps in current research, composites with AlON concentrations of 0%, 2%, 5%, and 10% were fabricated using vacuum-assisted resin transfer molding (VARTM). Impact tests conducted in accordance with ASTM D7136 standards evaluated the composites’ response to high-energy impacts. The results demonstrated that the inclusion of AlON significantly enhanced the impact resistance of the composites, with the 5% AlON variant showing a 39% improvement in absorbed energy compared to the unreinforced baseline. This increase in toughness was primarily attributed to crack deflection and bridging mechanisms provided by the well-dispersed AlON particles. However, at 10% AlON, particle agglomeration introduced stress concentrations, leading to reduced performance gains. Comprehensive analysis using scanning electron microscopy (SEM) and ultrasonic C-scan imaging revealed reduced delamination areas, minimized matrix cracking, and improved homogeneity of AlON dispersion in the 5% composite. These findings included a 35% reduction in delamination area compared to the control, underscoring the effectiveness of the 5% AlON reinforcement. Response surface methodology (RSM) further validated that 5% AlON was the optimal reinforcement level, offering the best balance between impact resistance and material stability. Overall, AlON-reinforced Kevlar–epoxy composites—particularly those containing 5% AlON—exhibit strong potential for lightweight, high-impact applications. Future research should investigate their environmental durability under extreme conditions, including thermal cycling and moisture exposure, to ensure long-term performance.
- Open Access
- 17 November 2025
- Published by Penerbit UTM Press in Jurnal Mekanikal
- p. 1-17
EVALUATING SUCCESS IN NIGERIAN CONSTRUCTION PROJECTS: A COMPREHENSIVE LITERATURE REVIEW ON CRITERIA AND METHODS
This study aims to develop a comprehensive framework for evaluating construction project success in Nigeria by identifying key success criteria, reviewing evaluation methods, and examining their relevance within the Nigerian context. Using a mixed-methods research approach, the study integrates quantitative techniques, such as performance metrics and schedule variance analysis, with qualitative methods, including stakeholder interviews and feedback collection. The findings reveal that traditional success criteria—time, cost, and quality—remain essential but insufficient for capturing the full scope of project success. The study highlights the growing significance of modern criteria, including sustainability, stakeholder satisfaction, and worker safety, underscoring the need for a holistic evaluation framework. A major contribution of this study is the development of a context-specific project success framework tailored to Nigeria’s unique socio-economic and regulatory environment. This framework addresses industry-specific challenges, such as the integration of sustainability metrics, the enhancement of stakeholder engagement, and the adoption of mixed-methods evaluation practices. By promoting the systematic assessment of project outcomes, the study provides practical guidance for industry stakeholders, policymakers, and construction firms. The recommendations emphasize the importance of regulatory reforms, capacity-building initiatives, and the development of sustainable construction practices. This contribution advances the understanding of project success in developing countries and provides a model that can be adapted for similar contexts, supporting industry growth and improving project performance in Nigeria’s construction sector.
- 17 November 2025
- Published by Penerbit UTM Press in Jurnal Mekanikal
- p. 1-17
Open AccessEVALUATING SUCCESS IN NIGERIAN CONSTRUCTION PROJECTS: A COMPREHENSIVE LITERATURE REVIEW ON CRITERIA AND METHODS
This study aims to develop a comprehensive framework for evaluating construction project success in Nigeria by identifying key success criteria, reviewing evaluation methods, and examining their relevance within the Nigerian context. Using a mixed-methods research approach, the study integrates quantitative techniques, such as performance metrics and schedule variance analysis, with qualitative methods, including stakeholder interviews and feedback collection. The findings reveal that traditional success criteria—time, cost, and quality—remain essential but insufficient for capturing the full scope of project success. The study highlights the growing significance of modern criteria, including sustainability, stakeholder satisfaction, and worker safety, underscoring the need for a holistic evaluation framework. A major contribution of this study is the development of a context-specific project success framework tailored to Nigeria’s unique socio-economic and regulatory environment. This framework addresses industry-specific challenges, such as the integration of sustainability metrics, the enhancement of stakeholder engagement, and the adoption of mixed-methods evaluation practices. By promoting the systematic assessment of project outcomes, the study provides practical guidance for industry stakeholders, policymakers, and construction firms. The recommendations emphasize the importance of regulatory reforms, capacity-building initiatives, and the development of sustainable construction practices. This contribution advances the understanding of project success in developing countries and provides a model that can be adapted for similar contexts, supporting industry growth and improving project performance in Nigeria’s construction sector.
- 8 November 2025
- Published by Universitas Teknokrat Indonesia in JICE (Journal of Infrastructural in Civil Engineering)
- Vol. 7 (01) , 01-16
UTILIZING POWER PLANT WASTE FOR SUSTAINABLE BUILDING MATERIALS: ADVANCING NIGERIA’S CIRCULAR ECONOMY
Power plant waste, including fly ash, slag, bottom ash, and flue gas desulfurization (FGD) gypsum, offers a sustainable solution to address environmental, economic, and resource challenges in construction. This study explores the potential of these byproducts to replace conventional materials in Nigeria’s construction industry, aligning with global sustainability trends. Comprehensive characterization revealed their compatibility with pozzolanic and cementitious applications, meeting chemical and physical requirements. Concrete with fly ash replacement up to 20% achieved comparable compressive strength (32.1 MPa at 28 days) to conventional cement, with enhanced durability through reduced water absorption (6.9%) and minimal freeze-thaw weight loss (1.1%). Life-cycle analysis demonstrated substantial environmental benefits, including reductions in greenhouse gas emissions (up to 28%) and energy consumption (up to 25%). Economic analysis showed cost savings ranging from 11% to 23% at optimal replacement levels. Despite these advantages, challenges such as variability in material properties and inadequate infrastructure highlight the need for standardized preprocessing methods and regulatory support. Recommendations include establishing regulatory frameworks, incentivizing recycling, and investing in infrastructure to enable scalability. The findings emphasize the transformative potential of power plant waste in advancing sustainable construction practices, reducing environmental footprints, and promoting resource efficiency in developing nations. Future research should focus on optimizing higher replacement levels, assessing long-term performance, and evaluating socio-economic impacts to facilitate widespread adoption.
- 8 November 2025
- Published by Universitas Teknokrat Indonesia in JICE (Journal of Infrastructural in Civil Engineering)
- Vol. 7 (01) , 01-16
UTILIZING POWER PLANT WASTE FOR SUSTAINABLE BUILDING MATERIALS: ADVANCING NIGERIA’S CIRCULAR ECONOMY
Power plant waste, including fly ash, slag, bottom ash, and flue gas desulfurization (FGD) gypsum, offers a sustainable solution to address environmental, economic, and resource challenges in construction. This study explores the potential of these byproducts to replace conventional materials in Nigeria’s construction industry, aligning with global sustainability trends. Comprehensive characterization revealed their compatibility with pozzolanic and cementitious applications, meeting chemical and physical requirements. Concrete with fly ash replacement up to 20% achieved comparable compressive strength (32.1 MPa at 28 days) to conventional cement, with enhanced durability through reduced water absorption (6.9%) and minimal freeze-thaw weight loss (1.1%). Life-cycle analysis demonstrated substantial environmental benefits, including reductions in greenhouse gas emissions (up to 28%) and energy consumption (up to 25%). Economic analysis showed cost savings ranging from 11% to 23% at optimal replacement levels. Despite these advantages, challenges such as variability in material properties and inadequate infrastructure highlight the need for standardized preprocessing methods and regulatory support. Recommendations include establishing regulatory frameworks, incentivizing recycling, and investing in infrastructure to enable scalability. The findings emphasize the transformative potential of power plant waste in advancing sustainable construction practices, reducing environmental footprints, and promoting resource efficiency in developing nations. Future research should focus on optimizing higher replacement levels, assessing long-term performance, and evaluating socio-economic impacts to facilitate widespread adoption.
- 8 November 2025
- Published by Universitas Teknokrat Indonesia in JICE (Journal of Infrastructural in Civil Engineering)
- Vol. 7 (01) , 30-45
INTEGRATING LOCAL SUPPLY CHAIN DYNAMICS TO ENHANCE SUSTAINABILITY AND PERFORMANCE IN NIGERIA’S RESIDENTIAL CONSTRUCTION SECTOR
Nigeria’s residential construction sector faces critical challenges, including fragmented supply chain practices, heavy reliance on imported materials, and limited adoption of advanced technologies. These inefficiencies result in prolonged project timelines, increased costs, and environmental degradation, underscoring the need for systemic reform. This study examines the integration of local supply chain dynamics as a strategy to enhance sustainability and performance within the sector. A mixed-methods approach was adopted, incorporating surveys, interviews, and simulated data analyses. Quantitative data collected from 150 construction professionals revealed that only 27.4% of materials used in the sector are sourced locally, while qualitative insights from 30 stakeholders identified key barriers, such as variability in material quality (82%) and inadequate supplier capacity (76%). The findings highlight that integrating local materials can deliver significant environmental and economic benefits. For example, project costs can be reduced by 22% and carbon emissions by 35% through the use of locally sourced materials. A case study of a housing project in Kaduna State demonstrated that utilizing local materials improved project timelines by 35% and lowered costs by 20%. Simulated scenario analyses further supported these findings, showing that increased reliance on local materials enhances efficiency and reduces logistical challenges. Nevertheless, structural barriers such as insufficient policy support and low digital tool adoption must be addressed through targeted interventions. This study recommends the establishment of standardized certification systems, capacity-building programs, and financial incentives to support local supply chain integration. It also underscores the need for digital transformation to optimize supply chain operations and foster sustainable practices. The findings provide practical recommendations and a replicable framework for stakeholders seeking to enhance construction performance while aligning with global sustainability goals.
- 8 November 2025
- Published by Universitas Teknokrat Indonesia in JICE (Journal of Infrastructural in Civil Engineering)
- Vol. 7 (01) , 30-45
INTEGRATING LOCAL SUPPLY CHAIN DYNAMICS TO ENHANCE SUSTAINABILITY AND PERFORMANCE IN NIGERIA’S RESIDENTIAL CONSTRUCTION SECTOR
Nigeria’s residential construction sector faces critical challenges, including fragmented supply chain practices, heavy reliance on imported materials, and limited adoption of advanced technologies. These inefficiencies result in prolonged project timelines, increased costs, and environmental degradation, underscoring the need for systemic reform. This study examines the integration of local supply chain dynamics as a strategy to enhance sustainability and performance within the sector. A mixed-methods approach was adopted, incorporating surveys, interviews, and simulated data analyses. Quantitative data collected from 150 construction professionals revealed that only 27.4% of materials used in the sector are sourced locally, while qualitative insights from 30 stakeholders identified key barriers, such as variability in material quality (82%) and inadequate supplier capacity (76%). The findings highlight that integrating local materials can deliver significant environmental and economic benefits. For example, project costs can be reduced by 22% and carbon emissions by 35% through the use of locally sourced materials. A case study of a housing project in Kaduna State demonstrated that utilizing local materials improved project timelines by 35% and lowered costs by 20%. Simulated scenario analyses further supported these findings, showing that increased reliance on local materials enhances efficiency and reduces logistical challenges. Nevertheless, structural barriers such as insufficient policy support and low digital tool adoption must be addressed through targeted interventions. This study recommends the establishment of standardized certification systems, capacity-building programs, and financial incentives to support local supply chain integration. It also underscores the need for digital transformation to optimize supply chain operations and foster sustainable practices. The findings provide practical recommendations and a replicable framework for stakeholders seeking to enhance construction performance while aligning with global sustainability goals.
- 8 November 2025
- Published by Universitas Teknokrat Indonesia in JICE (Journal of Infrastructural in Civil Engineering)
- Vol. 7 (01) , 46-60
FROM LANDFILLS TO LIVELIHOODS: SOCIOECONOMIC IMPACTS OF CONSTRUCTION WASTE MANAGEMENT IN NIGERIA
Construction waste management (CWM) is vital for achieving sustainable development, particularly in rapidly urbanizing nations like Nigeria. This study investigates the socioeconomic and environmental implications of CWM practices in Lagos, Abuja, and Kano, utilizing a mixed-methods approach that integrates survey data from 300 respondents, semi-structured interviews, and field observations. Results reveal that informal systems dominate CWM, handling 67% of waste, while advanced practices, such as recycling and reuse, are adopted by only 9% of respondents. Despite these limitations, recycling activities demonstrated significant socioeconomic potential, including strong positive correlations with job creation and livelihood improvement. Environmental modeling indicates that implementing recycling at 30% of construction sites could reduce landfill contributions by 45% and methane emissions by 6,000 tons annually. Key challenges include weak regulatory enforcement, inadequate infrastructure, financial barriers, and limited public awareness. Regional differences were evident: Lagos requires investment in large-scale recycling infrastructure, Abuja needs stricter regulatory enforcement, and Kano would benefit from targeted public awareness campaigns. This study applies the circular economy framework and sustainable livelihoods approach to highlight the potential of integrating informal waste handlers into formal systems, strengthening regulatory frameworks, and scaling public-private partnerships. It also emphasizes the role of innovative technologies, such as artificial intelligence and blockchain, in enhancing waste tracking and management. These findings contribute to global discussions on sustainable waste practices and offer actionable insights for addressing CWM challenges in Nigeria and similar developing economies.
- 8 November 2025
- Published by Universitas Teknokrat Indonesia in JICE (Journal of Infrastructural in Civil Engineering)
- Vol. 7 (01) , 46-60
FROM LANDFILLS TO LIVELIHOODS: SOCIOECONOMIC IMPACTS OF CONSTRUCTION WASTE MANAGEMENT IN NIGERIA
Construction waste management (CWM) is vital for achieving sustainable development, particularly in rapidly urbanizing nations like Nigeria. This study investigates the socioeconomic and environmental implications of CWM practices in Lagos, Abuja, and Kano, utilizing a mixed-methods approach that integrates survey data from 300 respondents, semi-structured interviews, and field observations. Results reveal that informal systems dominate CWM, handling 67% of waste, while advanced practices, such as recycling and reuse, are adopted by only 9% of respondents. Despite these limitations, recycling activities demonstrated significant socioeconomic potential, including strong positive correlations with job creation and livelihood improvement. Environmental modeling indicates that implementing recycling at 30% of construction sites could reduce landfill contributions by 45% and methane emissions by 6,000 tons annually. Key challenges include weak regulatory enforcement, inadequate infrastructure, financial barriers, and limited public awareness. Regional differences were evident: Lagos requires investment in large-scale recycling infrastructure, Abuja needs stricter regulatory enforcement, and Kano would benefit from targeted public awareness campaigns. This study applies the circular economy framework and sustainable livelihoods approach to highlight the potential of integrating informal waste handlers into formal systems, strengthening regulatory frameworks, and scaling public-private partnerships. It also emphasizes the role of innovative technologies, such as artificial intelligence and blockchain, in enhancing waste tracking and management. These findings contribute to global discussions on sustainable waste practices and offer actionable insights for addressing CWM challenges in Nigeria and similar developing economies.
- 8 November 2025
- Published by Universitas Teknokrat Indonesia in JICE (Journal of Infrastructural in Civil Engineering)
- Vol. 7 (01) , 17-29
ANALYZING BARRIERS TO SUSTAINABILITY: A CASE STUDY OF FAILED GREEN BUILDING PROJECTS IN NIGERIA
This study examines the persistent barriers to sustainable construction in Nigeria by analyzing ten green building projects that failed to meet their sustainability objectives. Through a qualitative case study approach, the research identifies economic, technological, regulatory, and socio-cultural challenges as the primary obstacles. Economic barriers, such as significant budget overruns and frequent funding disruptions, underscore the financial risks associated with sustainable construction. Technological barriers, including a shortage of skilled labor and reliance on imported materials, highlight a critical capacity gap in the local construction industry. Regulatory challenges are characterized by ineffective policies and inconsistent enforcement, weakening the framework needed to support green building initiatives. Socio-cultural barriers, including resistance to change and low awareness of the benefits of sustainability, further complicate efforts to engage stakeholders effectively. The study offers strategic recommendations to overcome these barriers, such as enhancing financial incentives, developing targeted training programs, reforming regulatory frameworks, and launching comprehensive awareness campaigns. It also calls for future research, including longitudinal studies to evaluate the long-term impacts of sustainable practices and comparative international research to adapt successful strategies to the Nigerian context.
- 8 November 2025
- Published by Universitas Teknokrat Indonesia in JICE (Journal of Infrastructural in Civil Engineering)
- Vol. 7 (01) , 17-29
ANALYZING BARRIERS TO SUSTAINABILITY: A CASE STUDY OF FAILED GREEN BUILDING PROJECTS IN NIGERIA
This study examines the persistent barriers to sustainable construction in Nigeria by analyzing ten green building projects that failed to meet their sustainability objectives. Through a qualitative case study approach, the research identifies economic, technological, regulatory, and socio-cultural challenges as the primary obstacles. Economic barriers, such as significant budget overruns and frequent funding disruptions, underscore the financial risks associated with sustainable construction. Technological barriers, including a shortage of skilled labor and reliance on imported materials, highlight a critical capacity gap in the local construction industry. Regulatory challenges are characterized by ineffective policies and inconsistent enforcement, weakening the framework needed to support green building initiatives. Socio-cultural barriers, including resistance to change and low awareness of the benefits of sustainability, further complicate efforts to engage stakeholders effectively. The study offers strategic recommendations to overcome these barriers, such as enhancing financial incentives, developing targeted training programs, reforming regulatory frameworks, and launching comprehensive awareness campaigns. It also calls for future research, including longitudinal studies to evaluate the long-term impacts of sustainable practices and comparative international research to adapt successful strategies to the Nigerian context.
- Open Access
- 31 October 2025
- Published by LPPM UNPAR in Journal of Sustainable Construction
- Vol. 5 (1) , 1-18
Analysing Sustainable Construction Practices in Developing Countries: Success Stories and Challenges
This study explores the adoption and implementation of sustainable construction practices in developing countries, focusing on key success factors, challenges, and potential solutions. Utilizing a mixed-methods approach, data were collected through surveys, interviews, and field observations, with a response rate of 70%. The findings revealed that while awareness of sustainable construction practices is relatively high (75% of respondents), their implementation remains limited (45% of projects). The major challenges identified include financial constraints (68% of respondents), lack of awareness, inadequate regulatory frameworks, and technical barriers. Critical success factors for sustainable projects include robust government support, effective stakeholder collaboration, access to innovative financing, and comprehensive capacity-building programs. The study contributes to both academic and practical understanding by providing empirical evidence and actionable insights to enhance the adoption of sustainable construction practices. Recommendations for policymakers, construction professionals, and stakeholders include developing comprehensive sustainability policies, providing financial incentives, strengthening regulatory frameworks, promoting public-private partnerships, and investing in continuous capacity building.
- 31 October 2025
- Published by LPPM UNPAR in Journal of Sustainable Construction
- Vol. 5 (1) , 1-18
Open AccessAnalysing Sustainable Construction Practices in Developing Countries: Success Stories and Challenges
This study explores the adoption and implementation of sustainable construction practices in developing countries, focusing on key success factors, challenges, and potential solutions. Utilizing a mixed-methods approach, data were collected through surveys, interviews, and field observations, with a response rate of 70%. The findings revealed that while awareness of sustainable construction practices is relatively high (75% of respondents), their implementation remains limited (45% of projects). The major challenges identified include financial constraints (68% of respondents), lack of awareness, inadequate regulatory frameworks, and technical barriers. Critical success factors for sustainable projects include robust government support, effective stakeholder collaboration, access to innovative financing, and comprehensive capacity-building programs. The study contributes to both academic and practical understanding by providing empirical evidence and actionable insights to enhance the adoption of sustainable construction practices. Recommendations for policymakers, construction professionals, and stakeholders include developing comprehensive sustainability policies, providing financial incentives, strengthening regulatory frameworks, promoting public-private partnerships, and investing in continuous capacity building.