Tom David Müller
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tom David Müller has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Kyowon Jeong
University of Tubingen Faculty of Science
5 shared publications - Timo Sachsenberg
University of Tübingen
5 shared publications Axel Walter
Applied Bioinformatics, Department for Computer Science University of Tübingen Tübingen Germany
4 shared publicationsOliver Kohlbacher
Applied Bioinformatics, Department of Computer Science University of Tübingen Tübingen Germany
4 shared publications- Ayesha Feroz
University of Tübingen
3 shared publications - Oliver Kohlbacher
University of Tübingen
3 shared publications
Latest Publications
- Open Access
Decoupling Quantification and Identification for Label-Free Top-Down Proteomics Improves Proteome Coverage
Quantifying proteoforms is essential for understanding biological processes. The most widely used quantification approach in top-down proteomics (TDP) is label-free quantification (LFQ), where quantification and identification compete for acquisition time. We identified missing values, insufficient fragmentation, and undersampling of low-abundance proteoforms as major factors limiting conventional TDP-LFQ workflows. Our proposed workflow decouples quantification and identification through MS1-only quantification followed by targeted data-dependent MS2 identification. The MS1-only acquisition more than doubled the number of mass features quantified reliably and improved quantification precision. Focusing targeted MS2 acquisition on significantly differentially abundant features enables optimization of MS2 parameters and increases identification coverage by 50%. The workflow was validated across different chromatographic conditions, MS acquisition setups, and sample preparation strategies. In Escherichia coli grown on glucose or acetate, the increased depth enabled by this workflow revealed biological insights inaccessible to a previously published bottom-up proteomics dataset. Overall, decoupling quantification and identification improves quantitative depth and proteoform coverage in TDP-LFQ and provides a flexible strategy for high-sensitivity and high-throughput proteoform quantification. TOC:
Open AccessDecoupling Quantification and Identification for Label-Free Top-Down Proteomics Improves Proteome Coverage
Quantifying proteoforms is essential for understanding biological processes. The most widely used quantification approach in top-down proteomics (TDP) is label-free quantification (LFQ), where quantification and identification compete for acquisition time. We identified missing values, insufficient fragmentation, and undersampling of low-abundance proteoforms as major factors limiting conventional TDP-LFQ workflows. Our proposed workflow decouples quantification and identification through MS1-only quantification followed by targeted data-dependent MS2 identification. The MS1-only acquisition more than doubled the number of mass features quantified reliably and improved quantification precision. Focusing targeted MS2 acquisition on significantly differentially abundant features enables optimization of MS2 parameters and increases identification coverage by 50%. The workflow was validated across different chromatographic conditions, MS acquisition setups, and sample preparation strategies. In Escherichia coli grown on glucose or acetate, the increased depth enabled by this workflow revealed biological insights inaccessible to a previously published bottom-up proteomics dataset. Overall, decoupling quantification and identification improves quantitative depth and proteoform coverage in TDP-LFQ and provides a flexible strategy for high-sensitivity and high-throughput proteoform quantification. TOC:
- Open Access
- 15 October 2026
- Published by Wiley in Protein Science
- Vol. 35 (11) , e70820
NuXLApp : Interactive data analysis and visualization for protein‐nucleic acid crosslinking mass spectrometry
Protein‐nucleic acid (protein‐Nu) interactions are crucial for many cellular processes and biological functions. Crosslinking mass spectrometry (XL‐MS) has emerged as a powerful method for identifying these interactions. However, the analysis of protein‐Nu XL‐MS data requires an integrated workflow from raw data processing to results inspection and validation. Existing workflows for protein‐Nu XL‐MS often require switching between tools and considerable manual processing. Here, we introduce NuXLApp, an interactive web‐based application for data processing and results visualization in protein‐Nu XL‐MS studies. NuXLApp integrates the protein‐Nu crosslink search engine “NuXL,” machine‐learning models for peptide property prediction, and interactive result visualization within a reproducible workflow. It enables rapid validation of false discovery rate‐controlled crosslink spectrum match‐level identifications and facilitates collaboration and intuitive exploration of experimental results. In addition, NuXLApp generates a spectral library from identified protein‐Nu crosslinks to enable quantitative analysis of crosslinks using data‐independent acquisition (DIA). NuXLApp supports discovery‐driven identification of protein‐nucleic acid crosslinks and enables DIA‐based follow‐up experiments for their quantitative analysis. NuXLApp is open‐source and available via the OpenMS WebApps platform at https://nuxl.webapps.openms.de/ .
- 15 October 2026
- Published by Wiley in Protein Science
- Vol. 35 (11) , e70820
Open AccessNuXLApp : Interactive data analysis and visualization for protein‐nucleic acid crosslinking mass spectrometry
Protein‐nucleic acid (protein‐Nu) interactions are crucial for many cellular processes and biological functions. Crosslinking mass spectrometry (XL‐MS) has emerged as a powerful method for identifying these interactions. However, the analysis of protein‐Nu XL‐MS data requires an integrated workflow from raw data processing to results inspection and validation. Existing workflows for protein‐Nu XL‐MS often require switching between tools and considerable manual processing. Here, we introduce NuXLApp, an interactive web‐based application for data processing and results visualization in protein‐Nu XL‐MS studies. NuXLApp integrates the protein‐Nu crosslink search engine “NuXL,” machine‐learning models for peptide property prediction, and interactive result visualization within a reproducible workflow. It enables rapid validation of false discovery rate‐controlled crosslink spectrum match‐level identifications and facilitates collaboration and intuitive exploration of experimental results. In addition, NuXLApp generates a spectral library from identified protein‐Nu crosslinks to enable quantitative analysis of crosslinks using data‐independent acquisition (DIA). NuXLApp supports discovery‐driven identification of protein‐nucleic acid crosslinks and enables DIA‐based follow‐up experiments for their quantitative analysis. NuXLApp is open‐source and available via the OpenMS WebApps platform at https://nuxl.webapps.openms.de/ .
- Open Access
- 18 February 2026
- Published by Elsevier in Molecular & Cellular Proteomics
- Vol. 25 (6) , 101530
pmultiqc: An Open-Source, Lightweight, and Metadata-Oriented QC Reporting Library for MS Proteomics
- 18 February 2026
- Published by Elsevier in Molecular & Cellular Proteomics
- Vol. 25 (6) , 101530
Open Accesspmultiqc: An Open-Source, Lightweight, and Metadata-Oriented QC Reporting Library for MS Proteomics
- Open Access
pmultiqc: An open-source, lightweight, and metadata-oriented QC reporting library for MS proteomics
The increasing scale and complexity of proteomics data demand robust, scalable, and interpretable quality control (QC) frameworks to ensure data reliability and reproducibility. Here, we present pmultiqc, an open-source Python package that standardizes and generates web-based QC reports across multiple proteomics data analysis platforms. Built on top of the widely adopted MultiQC framework, pmultiqc offers specialized modules tailored to mass spectrometry workflows, with full initial support for quantms, DIA-NN, MaxQuant/MaxDIA, and mzIdentML/mzML-based pipelines. The package computes a wide range of QC metrics, including raw intensity distributions, identification rates, retention time consistency, and missing value patterns, and presents them in interactive, publication-ready reports. By leveraging sample metadata in the SDRF format, pmultiqc enables metadata-aware QC and introduces, for the first time in proteomics, QC reports and metrics guided by standardized sample metadata. Its modular architecture allows easy extension to new workflows and formats. Alongside comprehensive documentation and examples for running pmultiqc locally or integrated into existing workflows, we offer a cloud-based service that enables users to generate QC reports from their own data or public PRIDE datasets.
Open Accesspmultiqc: An open-source, lightweight, and metadata-oriented QC reporting library for MS proteomics
The increasing scale and complexity of proteomics data demand robust, scalable, and interpretable quality control (QC) frameworks to ensure data reliability and reproducibility. Here, we present pmultiqc, an open-source Python package that standardizes and generates web-based QC reports across multiple proteomics data analysis platforms. Built on top of the widely adopted MultiQC framework, pmultiqc offers specialized modules tailored to mass spectrometry workflows, with full initial support for quantms, DIA-NN, MaxQuant/MaxDIA, and mzIdentML/mzML-based pipelines. The package computes a wide range of QC metrics, including raw intensity distributions, identification rates, retention time consistency, and missing value patterns, and presents them in interactive, publication-ready reports. By leveraging sample metadata in the SDRF format, pmultiqc enables metadata-aware QC and introduces, for the first time in proteomics, QC reports and metrics guided by standardized sample metadata. Its modular architecture allows easy extension to new workflows and formats. Alongside comprehensive documentation and examples for running pmultiqc locally or integrated into existing workflows, we offer a cloud-based service that enables users to generate QC reports from their own data or public PRIDE datasets.
- Open Access
- 21 September 2025
- Published by Wiley in Proteomics
- Vol. 25 (24) , 15-21
FLASHApp: Interactive Data Analysis and Visualization for Top‐Down Proteomics
Top‐down proteomics (TDP) is increasingly being applied in proteoform‐resolved biomedical and clinical research. However, the complexity of TDP data demands flexible visualization tools integrated with analysis workflows to streamline interpretation and validation. Existing tools lack adaptability and interactivity, often requiring researchers to invest considerable resources on additional manual processing and analysis to generate publication‐ready results and figures. This added layer of manual intervention impacts reproducibility, posing a significant challenge to consistent scientific outcomes. FLASHApp addresses these challenges by offering a web‐based, platform‐independent application for TDP data analysis and visualization. It integrates key tools like FLASHDeconv, featuring automated processing, interactive publication‐ready visualizations, and direct team collaboration via shareable URLs. FLASHApp is open‐source software as part of OpenMS and available at https://www.openms.org/FLASHApp/ .
- 21 September 2025
- Published by Wiley in Proteomics
- Vol. 25 (24) , 15-21
Open AccessFLASHApp: Interactive Data Analysis and Visualization for Top‐Down Proteomics
Top‐down proteomics (TDP) is increasingly being applied in proteoform‐resolved biomedical and clinical research. However, the complexity of TDP data demands flexible visualization tools integrated with analysis workflows to streamline interpretation and validation. Existing tools lack adaptability and interactivity, often requiring researchers to invest considerable resources on additional manual processing and analysis to generate publication‐ready results and figures. This added layer of manual intervention impacts reproducibility, posing a significant challenge to consistent scientific outcomes. FLASHApp addresses these challenges by offering a web‐based, platform‐independent application for TDP data analysis and visualization. It integrates key tools like FLASHDeconv, featuring automated processing, interactive publication‐ready visualizations, and direct team collaboration via shareable URLs. FLASHApp is open‐source software as part of OpenMS and available at https://www.openms.org/FLASHApp/ .
- Open Access
- 27 May 2025
- Published by Wiley
False Discovery Rate Estimation in Spectral Deconvolution in Top-down Proteomics
The complex mass spectra of entire proteins present significant challenges for data analysis in top-down proteomics (TDP). A key step in TDP analysis is spectral deconvolution, which extracts ion masses from spectral signals. Inaccuracies in this step can propagate to downstream analysis, such as proteoform identification and quantification, undermining the accuracy of the entire workflow. Despite its critical role, few robust methods have been introduced to estimate the false-discovery rate (FDR) for spectral deconvolution. We have developed a novel FDR estimation method specifically designed for spectral deconvolution. Our approach introduces decoy masses (DMs), artificially generated masses that mimic the behaviour of false positives (FPs) arising during the deconvolution process, which in turn enables the estimation of the FDR. We have validated our method using both in silico and experimental spectra. In silico datasets, our method achieved an average maximum absolute difference of 0.337 between estimated and true FDR across six datasets with varying resolution and noise levels. When applied to experimental spectra of known proteins, FDRs of approximately 5.64% and 9.75% were observed when 5% and 10% FDR thresholds were applied, respectively. The FDR estimation feature is implemented in the FLASHDeconv algorithm as part of the OpenMS open-source project.
- 27 May 2025
- Published by Wiley
Open AccessFalse Discovery Rate Estimation in Spectral Deconvolution in Top-down Proteomics
The complex mass spectra of entire proteins present significant challenges for data analysis in top-down proteomics (TDP). A key step in TDP analysis is spectral deconvolution, which extracts ion masses from spectral signals. Inaccuracies in this step can propagate to downstream analysis, such as proteoform identification and quantification, undermining the accuracy of the entire workflow. Despite its critical role, few robust methods have been introduced to estimate the false-discovery rate (FDR) for spectral deconvolution. We have developed a novel FDR estimation method specifically designed for spectral deconvolution. Our approach introduces decoy masses (DMs), artificially generated masses that mimic the behaviour of false positives (FPs) arising during the deconvolution process, which in turn enables the estimation of the FDR. We have validated our method using both in silico and experimental spectra. In silico datasets, our method achieved an average maximum absolute difference of 0.337 between estimated and true FDR across six datasets with varying resolution and noise levels. When applied to experimental spectra of known proteins, FDRs of approximately 5.64% and 9.75% were observed when 5% and 10% FDR thresholds were applied, respectively. The FDR estimation feature is implemented in the FLASHDeconv algorithm as part of the OpenMS open-source project.
- Open Access
- 17 April 2025
- Published by Wiley
FLASHApp: Interactive Data Analysis and Visualization for Top-Down Proteomics
Top-down proteomics (TDP) is increasingly being applied in proteoform-resolved biomedical and clinical research. However, the complexity of TDP data demands flexible visualization tools integrated with analysis workflows to streamline interpretation and validation. Existing tools lack adaptability and interactivity, often requiring researchers to invest considerable resources on additional manual processing and analysis to generate publication-ready results and figures. This added layer of manual intervention impacts reproducibility, posing a significant challenge to consistent scientific outcomes. FLASHApp addresses these challenges by offering a web-based, platform-independent application for TDP data analysis and visualization. It integrates key tools like FLASHDeconv, featuring automated processing, interactive publication-ready visualizations, and direct team collaboration via shareable URLs. FLASHApp is open-source software as part of OpenMS and available at https://www.openms.org/FLASHApp/.
- 17 April 2025
- Published by Wiley
Open AccessFLASHApp: Interactive Data Analysis and Visualization for Top-Down Proteomics
Top-down proteomics (TDP) is increasingly being applied in proteoform-resolved biomedical and clinical research. However, the complexity of TDP data demands flexible visualization tools integrated with analysis workflows to streamline interpretation and validation. Existing tools lack adaptability and interactivity, often requiring researchers to invest considerable resources on additional manual processing and analysis to generate publication-ready results and figures. This added layer of manual intervention impacts reproducibility, posing a significant challenge to consistent scientific outcomes. FLASHApp addresses these challenges by offering a web-based, platform-independent application for TDP data analysis and visualization. It integrates key tools like FLASHDeconv, featuring automated processing, interactive publication-ready visualizations, and direct team collaboration via shareable URLs. FLASHApp is open-source software as part of OpenMS and available at https://www.openms.org/FLASHApp/.
- 28 February 2025
- Published by American Chemical Society (ACS) in Journal of Proteome Research
pyOpenMS-viz: Streamlining Mass Spectrometry Data Visualization with pandas
Mass spectrometry data visualization is essential for a wide range of applications, such as validation of workflows and results, benchmarking new algorithms, and creating comprehensive quality control reports. Python offers a popular and powerful framework for analyzing and visualizing multidimensional data; however, generating commonly used mass spectrometry plots in Python can be cumbersome. Here we present pyOpenMS-viz, a versatile, unified framework for generating mass spectrometry plots. pyOpenMS-viz directly extends pandas DataFrame plotting for generating figures in a single line of code. This implementation enables easy integration across various Python-based mass spectrometry tools that already use pandas DataFrames to store MS data. pyOpenMS-viz is open-source under a BSD 3-Clause license and freely available at https://github.com/OpenMS/pyopenms_viz.
- 28 February 2025
- Published by American Chemical Society (ACS) in Journal of Proteome Research
pyOpenMS-viz: Streamlining Mass Spectrometry Data Visualization with pandas
Mass spectrometry data visualization is essential for a wide range of applications, such as validation of workflows and results, benchmarking new algorithms, and creating comprehensive quality control reports. Python offers a popular and powerful framework for analyzing and visualizing multidimensional data; however, generating commonly used mass spectrometry plots in Python can be cumbersome. Here we present pyOpenMS-viz, a versatile, unified framework for generating mass spectrometry plots. pyOpenMS-viz directly extends pandas DataFrame plotting for generating figures in a single line of code. This implementation enables easy integration across various Python-based mass spectrometry tools that already use pandas DataFrames to store MS data. pyOpenMS-viz is open-source under a BSD 3-Clause license and freely available at https://github.com/OpenMS/pyopenms_viz.
- Open Access
- 30 January 2025
- Published by American Chemical Society (ACS) in Journal of Proteome Research
- Vol. 24 (2) , 940-948
OpenMS WebApps: Building User-Friendly Solutions for MS Analysis
Liquid chromatography-mass spectrometry (LC-MS) is an indispensable analytical technique in proteomics, metabolomics, and other life sciences. While OpenMS provides advanced open-source software for MS data analysis, its complexity can be challenging for nonexperts. To address this, we have developed OpenMS WebApps, a framework for creating user-friendly MS web applications based on the Streamlit Python package. OpenMS WebApps simplifies MS data analysis through an intuitive graphical user interface, interactive result visualizations, and support for both local and online execution. Key features include workspace management, automatic generation of input widgets, and parallel execution of tools, resulting in high performance and ready-to-use solutions for online and local deployment. This framework benefits both researchers and developers: scientists can focus on their research without the burden of complex software setups, and developers can rapidly create and distribute custom WebApps with novel algorithms. Several applications built on the OpenMS WebApps template demonstrate its utility across diverse MS-related fields, enhancing the OpenMS ecosystem for developers and a wider range of users. Furthermore, it integrates seamlessly with third-party software, extending its benefits to developers beyond the OpenMS community.
- 30 January 2025
- Published by American Chemical Society (ACS) in Journal of Proteome Research
- Vol. 24 (2) , 940-948
Open AccessOpenMS WebApps: Building User-Friendly Solutions for MS Analysis
Liquid chromatography-mass spectrometry (LC-MS) is an indispensable analytical technique in proteomics, metabolomics, and other life sciences. While OpenMS provides advanced open-source software for MS data analysis, its complexity can be challenging for nonexperts. To address this, we have developed OpenMS WebApps, a framework for creating user-friendly MS web applications based on the Streamlit Python package. OpenMS WebApps simplifies MS data analysis through an intuitive graphical user interface, interactive result visualizations, and support for both local and online execution. Key features include workspace management, automatic generation of input widgets, and parallel execution of tools, resulting in high performance and ready-to-use solutions for online and local deployment. This framework benefits both researchers and developers: scientists can focus on their research without the burden of complex software setups, and developers can rapidly create and distribute custom WebApps with novel algorithms. Several applications built on the OpenMS WebApps template demonstrate its utility across diverse MS-related fields, enhancing the OpenMS ecosystem for developers and a wider range of users. Furthermore, it integrates seamlessly with third-party software, extending its benefits to developers beyond the OpenMS community.