Xibin Sun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xibin Sun has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Peng Gao
School of Electrical and Information Engineering, Tianjin University, Tianjin, China
2 shared publications Xiaoyuan Wang
School of Electrical and Information Engineering Tianjin University Tianjin People's Republic of China
2 shared publicationsChris Gerada
Department of Electrical and Electronics Engineering University of Nottingham Nottingham UK
1 shared publication- David Gerada
University of Nottingham
1 shared publication
Latest Publications
- Open Access
- 17 September 2020
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 14 (12) , 2404-2411
Improved V‐shaped interior permanent magnet rotor topology with inward‐extended bridges for reduced torque ripple
Interior permanent magnet synchronous machines (IPMSMs) with V‐shaped permanent magnet (PM) rotors are widely used as traction motors in electric vehicles because of their high torque density and high efficiency. However, the V‐shape IPMSMs have the disadvantages of inevitable torque ripple due to the non‐sinusoidal air‐gap flux density distribution and the utilisation of the reluctance torque. In this study, with the aim of improving the torque ripple characteristics, a modified V‐shaped IPMSM rotor configuration with bridges extended inwards towards the pole centre is proposed to generate a more sinusoidal air‐gap flux density waveform. The proposed topology, referred to as ‘Type C’ within this study, is compared with baseline rotor configuration references, namely ‘Type A’ which is a conventional V‐shaped PM rotor, as well as ‘Type B’ which is a related configuration with a mechanically non‐uniform air gap. The analysis results show that the rotor ‘Type C’ exhibits significant advantages in terms of reducing cogging torque, torque ripple and radial force, without incurring additional air‐gap friction losses. Finally, a prototype of the IPMSM with the proposed rotor configuration is manufactured and tested, verifying the predicted benefits experimentally.
- 17 September 2020
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 14 (12) , 2404-2411
Open AccessImproved V‐shaped interior permanent magnet rotor topology with inward‐extended bridges for reduced torque ripple
Interior permanent magnet synchronous machines (IPMSMs) with V‐shaped permanent magnet (PM) rotors are widely used as traction motors in electric vehicles because of their high torque density and high efficiency. However, the V‐shape IPMSMs have the disadvantages of inevitable torque ripple due to the non‐sinusoidal air‐gap flux density distribution and the utilisation of the reluctance torque. In this study, with the aim of improving the torque ripple characteristics, a modified V‐shaped IPMSM rotor configuration with bridges extended inwards towards the pole centre is proposed to generate a more sinusoidal air‐gap flux density waveform. The proposed topology, referred to as ‘Type C’ within this study, is compared with baseline rotor configuration references, namely ‘Type A’ which is a conventional V‐shaped PM rotor, as well as ‘Type B’ which is a related configuration with a mechanically non‐uniform air gap. The analysis results show that the rotor ‘Type C’ exhibits significant advantages in terms of reducing cogging torque, torque ripple and radial force, without incurring additional air‐gap friction losses. Finally, a prototype of the IPMSM with the proposed rotor configuration is manufactured and tested, verifying the predicted benefits experimentally.
- Open Access
- 5 December 2019
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 14 (1) , 131-138
Study on the effects of rotor‐step skewing on the vibration and noise of a PMSM for electric vehicles
Radial force is the main cause of electromagnetic vibration and noise in motors. In this study, the vibration and noise characteristics of a permanent magnet synchronous motor (PMSM) with consideration of rotor‐step skewing are investigated. Firstly, the analytical model of considering rotor‐step skewing is deduced based on the Maxwell stress tensor method. The influence of rotor‐step skewing on of the PMSM is then analysed and summarised. Taking a 65 kW PMSM commonly used in electric vehicles as an example, combined with electromagnetic finite element analysis, is then evaluated. Secondly, an electromagnetic vibration and noise simulation analysis is conducted based on a multi‐physical field joint simulation platform, from which the influence of rotor‐step skewing on the vibration and noise is then summarised. Finally, a noise experiment is then carried out. The results obtained from the multi‐physical analysis and the tests conducted are presented to validate the precision of the simulation models, and the accuracy of the analytical model of .
- 5 December 2019
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 14 (1) , 131-138
Open AccessStudy on the effects of rotor‐step skewing on the vibration and noise of a PMSM for electric vehicles
Radial force is the main cause of electromagnetic vibration and noise in motors. In this study, the vibration and noise characteristics of a permanent magnet synchronous motor (PMSM) with consideration of rotor‐step skewing are investigated. Firstly, the analytical model of considering rotor‐step skewing is deduced based on the Maxwell stress tensor method. The influence of rotor‐step skewing on of the PMSM is then analysed and summarised. Taking a 65 kW PMSM commonly used in electric vehicles as an example, combined with electromagnetic finite element analysis, is then evaluated. Secondly, an electromagnetic vibration and noise simulation analysis is conducted based on a multi‐physical field joint simulation platform, from which the influence of rotor‐step skewing on the vibration and noise is then summarised. Finally, a noise experiment is then carried out. The results obtained from the multi‐physical analysis and the tests conducted are presented to validate the precision of the simulation models, and the accuracy of the analytical model of .