Gonzalo Hernández-López
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Gonzalo Hernández-López has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Laura Leticia Barrera-Necha
Centro de Desarrollo de Productos Bióticos, Instituto Politécnico Nacional, Yautepec de Zaragoza 62731, Mexico
3 shared publications - Jose Jesus Benitez
Insituto de Ciencia de Materiales de Sevilla, Centro Mixto CSIC-Universidad de Sevilla, Calle Americo Vespucio 49, Isla de la Cartuja, Sevilla 41092, Spain
1 shared publication - José Luis Acosta
Centro Interdisciplinario de Investigación para el Desarrollo Integral Regional Unidad Sinaloa, Instituto Politécnico Nacional, Guasave 81100, Mexico
1 shared publication - Mónica Hernández-López
Instituto Politécnico Nacional, Centro de Desarrollo de Productos Bióticos (CEPROBI), Carretera Yautepec-Jojutla, Km. 6, Calle CEPROBI 8, Colonia San Isidro, Yautepec C.P. 62739, Morelos, Mexico
1 shared publication - Odilia Pérez-Camacho
Universidad Autonóma de Nuevo León
1 shared publication - Silvia Bautista-Baños
Centro de Desarrollo de Productos Bioticos, Instituto Politécnico Nacional, Yautepec, Mexico
1 shared publication
Latest Publications
- Open Access
Characterization of Coffee Waste-Based Biopolymer Composite Blends for Packaging Development
In recent years, coffee waste by-products have been incorporated into polymer blends to reduce environmental pollution. In this study, coffee parchment (CP) was incorporated into biodegradable polylactic acid (PLA) and poly (butylene adipate-co-terephthalate) (PBAT) polymer blends to prepare ribbons through the extrusion process. Extracted green coffee bean oil (CO) was used as a plasticizer, and CP was used as a filler with and without functionalization. A solution of chitosan nanoparticles (ChNp) as a coating was applied to the ribbons. For the raw material, proximal analysis of the CP showed cellulose and lignin contents of 53.09 ± 3.42% and 23.60 ± 1.74%, respectively. The morphology of the blends was observed via scanning electron microscopy (SEM). Thermogravimetric analysis (TGA) showed an increase in the ribbons’ thermal stability with the functionalization. The results of differential scanning calorimetry (DSC) revealed better miscibility for the functionalized samples. The mechanical properties showed that with CP incorporation into the blends and with the ChNp coating, the Young’s modulus and the tensile strength decreased with no significant changes in the elongation at break. This work highlights the potential of reusing different by-products from the coffee industry, such as coffee oil from green beans and coffee parchment as a filler, and incorporating them into PLA PBAT biodegradable polymer blend ribbons with a nanostructured antimicrobial coating based on chitosan for future applications in food packaging.
Open AccessCharacterization of Coffee Waste-Based Biopolymer Composite Blends for Packaging Development
In recent years, coffee waste by-products have been incorporated into polymer blends to reduce environmental pollution. In this study, coffee parchment (CP) was incorporated into biodegradable polylactic acid (PLA) and poly (butylene adipate-co-terephthalate) (PBAT) polymer blends to prepare ribbons through the extrusion process. Extracted green coffee bean oil (CO) was used as a plasticizer, and CP was used as a filler with and without functionalization. A solution of chitosan nanoparticles (ChNp) as a coating was applied to the ribbons. For the raw material, proximal analysis of the CP showed cellulose and lignin contents of 53.09 ± 3.42% and 23.60 ± 1.74%, respectively. The morphology of the blends was observed via scanning electron microscopy (SEM). Thermogravimetric analysis (TGA) showed an increase in the ribbons’ thermal stability with the functionalization. The results of differential scanning calorimetry (DSC) revealed better miscibility for the functionalized samples. The mechanical properties showed that with CP incorporation into the blends and with the ChNp coating, the Young’s modulus and the tensile strength decreased with no significant changes in the elongation at break. This work highlights the potential of reusing different by-products from the coffee industry, such as coffee oil from green beans and coffee parchment as a filler, and incorporating them into PLA PBAT biodegradable polymer blend ribbons with a nanostructured antimicrobial coating based on chitosan for future applications in food packaging.
- Open Access
Coffee By-Products and Chitosan for Preventing Contamination for Botrytis sp. and Rhizopus sp. in Blueberry Commercialization
In blueberry storage, non-biodegradable synthetic plastic packaging is used for commercializing this product. The fungi Botrytis sp. and Rhizopus sp. can cause significant losses in postharvest blueberry commercialization. Consequently, the formulations of degradable polymeric based on polylactic acid (PLA)/poly(butylene adipate-co-terephthalate) (PBAT) 60/40 (PP) with coffee parchment (CP), green coffee bean oil (GCBO), chitosan solution (Ch), chitosan nanoparticles (ChNp), and nanostructured coating (NC) were used to develop biodegradable polymer matrix (PM). Caffeine and hexadecanoic acid were identified as principal compounds in GCBO, and the principal compounds in CP were flavonoids, terpenes, and lignans. The 100% mycelial growth inhibition to Botrytis sp. and Rhizopus sp. was observed using GCBO, Ch, ChNp, and NC in high concentrations. GCBO inhibited 100% of spore production in both fungi at all evaluated doses. In the in vivo tests, when compared to the control, the better treatments were: CP for Botrytis sp., with an incidence of 46.6% and a severity of 16%; and Ch for Rhizopus sp., with an incidence of 13.3% and a severity of 0.86%. The PM in the culture medium presented a fungistatic effect. The principal inhibition of mycelial growth (63%) on Botrytis sp. was with PLA/PBAT+NC (PP+NC), and (100%) was observed with PLA/PBAT+CP+NC (PPCP+NC), PP, and PP+NC on Rhizopus sp. Coffee by-products and PM have potential for the control of postharvest fungi in fruits and vegetables.
Open AccessCoffee By-Products and Chitosan for Preventing Contamination for Botrytis sp. and Rhizopus sp. in Blueberry Commercialization
In blueberry storage, non-biodegradable synthetic plastic packaging is used for commercializing this product. The fungi Botrytis sp. and Rhizopus sp. can cause significant losses in postharvest blueberry commercialization. Consequently, the formulations of degradable polymeric based on polylactic acid (PLA)/poly(butylene adipate-co-terephthalate) (PBAT) 60/40 (PP) with coffee parchment (CP), green coffee bean oil (GCBO), chitosan solution (Ch), chitosan nanoparticles (ChNp), and nanostructured coating (NC) were used to develop biodegradable polymer matrix (PM). Caffeine and hexadecanoic acid were identified as principal compounds in GCBO, and the principal compounds in CP were flavonoids, terpenes, and lignans. The 100% mycelial growth inhibition to Botrytis sp. and Rhizopus sp. was observed using GCBO, Ch, ChNp, and NC in high concentrations. GCBO inhibited 100% of spore production in both fungi at all evaluated doses. In the in vivo tests, when compared to the control, the better treatments were: CP for Botrytis sp., with an incidence of 46.6% and a severity of 16%; and Ch for Rhizopus sp., with an incidence of 13.3% and a severity of 0.86%. The PM in the culture medium presented a fungistatic effect. The principal inhibition of mycelial growth (63%) on Botrytis sp. was with PLA/PBAT+NC (PP+NC), and (100%) was observed with PLA/PBAT+CP+NC (PPCP+NC), PP, and PP+NC on Rhizopus sp. Coffee by-products and PM have potential for the control of postharvest fungi in fruits and vegetables.
- Open Access
- 6 February 2025
- Published by MDPI AG in Preprints.org
Chemical Composition and Antifungal Activity of Coffee By-Products and Chitosan Incorporated into a Polymeric Matrix on Botrytis sp. and Rhizopus sp.
In blueberry commercialization, non-biodegradable synthetic plastic packaging is used for refrigerated storage to maintain the quality of the horticultural product. The fungi Botrytis sp. and Rhizopus sp. can cause significant losses at this stage. Consequently, the formula-tions and production of degradable polymeric based on polylactic acid (PLA)/poly(butylene adipate-co-terephthalate) (PBAT) 60/40 (PP) with coffee parchment (CP), green coffee bean oil (GCBO), chitosan solution (Ch), chitosan nanoparticles (ChNp) and nanostructured coating (NC) were used to develop biodegradable polymer matrix (PM). Caffeine and hexadecanoic acid were identified as major compounds in GCBO, and the major compounds in CP were flavonoids, terpenes and lignans. The 100% of mycelial growth inhibition was observed with 1, 2 and 3% of GCBO, to Botrytis sp. and 20% Ch, 10 and 20% ChNp, 20% NC on Botrytis sp. and Rhizopus sp.; the GCBO inhibited 100% of spore production in both fungi at all evaluated doses. In the in vivo tests, for Botrytis sp. a lower incidence of 30% and a severity of 20% was obtained with the treatment of NC compared to the control. For Rhizopus sp., an incidence of 55% and a severity of 10% were observed with NC. The PM in the culture medium presented a fungistatic effect. The greatest inhibition of mycelial growth (63%) on Botrytis sp. was with PLA/PBAT+Nano coating (PP+NC) and (100%) was observed with PM+CW made with PLA/PBAT+CP+NC (PPCP+NC), PP and PP+NC on Rhizopus sp. Coffee by-products and PM have potential as natural fungicides for the control of postharvest fungi in fruits and vegetables.
- 6 February 2025
- Published by MDPI AG in Preprints.org
Open AccessChemical Composition and Antifungal Activity of Coffee By-Products and Chitosan Incorporated into a Polymeric Matrix on Botrytis sp. and Rhizopus sp.
In blueberry commercialization, non-biodegradable synthetic plastic packaging is used for refrigerated storage to maintain the quality of the horticultural product. The fungi Botrytis sp. and Rhizopus sp. can cause significant losses at this stage. Consequently, the formula-tions and production of degradable polymeric based on polylactic acid (PLA)/poly(butylene adipate-co-terephthalate) (PBAT) 60/40 (PP) with coffee parchment (CP), green coffee bean oil (GCBO), chitosan solution (Ch), chitosan nanoparticles (ChNp) and nanostructured coating (NC) were used to develop biodegradable polymer matrix (PM). Caffeine and hexadecanoic acid were identified as major compounds in GCBO, and the major compounds in CP were flavonoids, terpenes and lignans. The 100% of mycelial growth inhibition was observed with 1, 2 and 3% of GCBO, to Botrytis sp. and 20% Ch, 10 and 20% ChNp, 20% NC on Botrytis sp. and Rhizopus sp.; the GCBO inhibited 100% of spore production in both fungi at all evaluated doses. In the in vivo tests, for Botrytis sp. a lower incidence of 30% and a severity of 20% was obtained with the treatment of NC compared to the control. For Rhizopus sp., an incidence of 55% and a severity of 10% were observed with NC. The PM in the culture medium presented a fungistatic effect. The greatest inhibition of mycelial growth (63%) on Botrytis sp. was with PLA/PBAT+Nano coating (PP+NC) and (100%) was observed with PM+CW made with PLA/PBAT+CP+NC (PPCP+NC), PP and PP+NC on Rhizopus sp. Coffee by-products and PM have potential as natural fungicides for the control of postharvest fungi in fruits and vegetables.