POPetre Opritoiu

Petre Opritoiu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Petre Opritoiu has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Approach of Dental Implants Through the  Transfer-Matrix Method

    by Rǎzvan Alexandru Mitrea, Mihai-Sorin Tripa, Alexandru Vlad, Iulia-Maria Bărăian, Petre-Corneliu Opriţoiu, Roxana Carmen Cordoş, Carmen-Gabriela Băcilă, Daniela-Corina Jucan, Mihaela Ligia Ungureşan, Liviu Bolunduţ, et al.

    Oral health is a very important issue today. This approach presents an original idea: to model the dental implant as a double-articulated buckling bar on an elastic environment. The mandibular bone is considered as the elastic environment. The buckling bar is analyzed using the Transfer-Matrix Method. The risk of buckling is higher for straight bars subjected to axial compression. Therefore, knowing the critical buckling force is very important, especially in the case of dental implants. This study, based on the Transfer-Matrix Method, was carried out in two steps. In the first step, a double-articulated buckling bar on a rigid environment is considered. The second step involves studying the same doubly articulated bar, but with the joint at the lower end resting on an elastic environment. The bone in which the implant is placed is considered as this elastic environment. The Transfer-Matrix Method is easy to implement and provides quick results for problems involving the shape optimization of structural components. This article presents a completely new idea and an original approach to buckling analysis, with applications to dental implants. This work will serve as a foundation for future research involving experimental investigations of dental implants.

  • Open Access

    Applications of the Calculus by the Transfer Matrix Method for Long Rectangular Plates Under Uniform Vertical Loads

    by Cosmin-Sergiu Brisc, Mihai-Sorin Tripa, Ilie-Cristian Boldor, Dan-Marius Dumea, Robert Gyorbiro, Petre-Corneliu Opriţoiu, Laurenţiu Eusebiu Chifor, Ioan-Aurel Chereches, Vlad Mureşan, Mihaela Suciu

    The aim of this work is to present an original, relatively simple, and elegant approach to the analysis of long rectangular plates subjected to uniformly distributed vertical loads acting on various surfaces. Plate analysis is important in many fields, especially where components are either rectangular plates or can be approximated as such. The Transfer Matrix Method is increasingly used in research, as evidenced by the references cited. The advantages of this method lie in the simplicity of its algorithm, the ease of implementation in programming, and its straightforward integration into optimization software. The approach consists of discretizing the rectangular plate by sectioning it with planes parallel to the short sides—i.e., perpendicular to the two long edges. This results in a set of beams, each with a length equal to the width of the plate, a height equal to the plate’s thickness, and a unit width. Each unit beam has support at its ends that replicate the edge conditions of the plate along its long sides. In the study presented, the rectangular plate is embedded along its two long edges, meaning the unit beam is considered embedded at both ends. The Transfer Matrix Method is particularly valuable because it lends itself well to iterative calculations, making it easy to develop software capable of analyzing long rectangular plates quickly. This makes it especially useful for shape optimization applications, which we intend and hope to pursue in future studies.


  • Open Access

    Calculus of Long Rectangular Plates Embedded in Long Borders with Uniform Vertical Load on a Line Parallel to the Long Borders

    by Daniel Opruţa, Mihai-Sorin Tripa, Luminiţa Codrea, Cristian Boldor, Dan Dumea, Robert Gyorbiro, Cosmin Brisc, Iulia Bărăian, Petre Opriţoiu, Aurel Chereches, et al.

    This article presents the Transfer Matrix Method as a mathematical approach for the calculus of different structures that can be discretized into elements using an iterative calculus for future applications in the vehicle industry. Plate calculus is important in construction, medicine, orthodontics, and many other fields. This work is original due to the mathematical apparatus used in the calculus of long rectangular plates embedded in both long borders and required by a uniformly distributed force on a line parallel to the long borders. The plate is discretized along its length in unitary beams, which have the width of the rectangular plate. The unitary beam can also be discretized into parts. As applications, the long rectangular plates embedded on the two long borders and charged with a vertical uniform load that acts on a line parallel to the long borders are studied. A state vector is associated with each side. For each of the four cases studied, a matrix relationship was written for each side, based on a transfer matrix, the state vector corresponding to the origin side, and the vector due to the action of external forces acting on the considered side. After, it is possible to calculate all the state vectors for all sides of the unity beam. Now, the efforts, deformations, and stress can be calculated in any section of the beam, respectively, for the long rectangular plate. This calculus will serve as a calculus of resistance for different pieces of the components of vehicles.


  • Open Access

    Calculus of Long Rectangular Plates Embedded of The Long Borders with Uniform Vertical Load on a Line Parallel to The Long Borders through Transfer-Matrix Method for Applications in Vehicle Industry

    by Daniel Opruţa, Mihai Sorin Tripa, Luminiţa Codrea, Cristian Boldor, Dan Dumea, Robert Gyorbiro, Cosmin Brisc, Iulia Baraian, Petre Opritoiu, Aurel Chereches, et al.

    This work presents the Transfer-Matrix Method as a mathematical approach for the calculus of different structures that can be discretized into elements, using an iterative calculation for future applications in vehicle industry. Plate calculus is important in construction, in medicine, in orthodontics and in many other fields too. This work is original and new. The plate is discretized along its length in unitary beams, which have the width of the rectangular plate. The unitary beam can also be discretized into parts. As applications, they are studied long rectangular plates, embedded on the two long borders and charged with a vertical uniform load that acts on a line parallel to the long borders. It is associated with each side a state vector. For each of the four cases studied, a matrix relationship was written for some side, based on a transfer matrix, the state vector corresponding to origin side and the vector due to the action of external forces acting to the considered side. After, it is possible to calculate all the state vectors for all sides of the unity beam. Now, the efforts, deformations and stress can be calculated in any section of the beam, respectively for the long rectangular plate. This calculus will serve as calculus of resistance for different pieces of components of vehicles.


  • Open Access

    On The Calculus of a Double Articulated Buckling Bar on Elastic Environment through Transfer-Matrix Method with Applications for Dental Implants

    by Robert Gyorbiro, Mihai-Sorin Tripa, Otilia Cojocariu-Oltean, Petre Opritoiu, Iulia Bărăian, Doina-Iulia Rotaru, Mihaela Suciu

    Studies related to the methods and materials used for dental implants have been developed. This work presents an original idea, to assimilate the dental implant as a buckling double articulated bar on elastic environment, the mandibular bone being assimilated as an elastic environment. The buckling bar is treated through the Transfer-Matrix Method, that is very easy to program and gives results very quickly for problems of optimizing the form of some pieces must be solved, in occurrence, of dental implants. The most important material used for dental implants is titanium and its alloys, because it has good durability, it is resistant to corrosion and its most important characteristic is biocompatibility. Risks of buckling are higher for straight bars compressed with an axial force, that is very important to know the critical buckling force, that is important for the dental implant too. This study was done in two steps. In the first step it is considered the buckling double articulated bar on a rigid environment. The second step consisted in studying the same doubly articulated bar that the joint at the lower end of the bar is on an elastic environment, the bone in which the implant is placed being considered as an elastic environment. This work will serve to future research about dental implants.