Yanni Shen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yanni Shen has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Jianjun Meng
School of Mechanical Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China
6 shared publications - Defang Lv
School of Mechanical Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China
3 shared publications - Gaoyang Meng
School of Mechanical Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China
3 shared publications - Gengqi Liu
School of Mechanical Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China
1 shared publication - Liqing Yao
School of Mechanical Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China
1 shared publication - Zhicheng Wang
School of Mechanical Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China
1 shared publication
Latest Publications
- Open Access
- 26 December 2025
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 17 (1) , 17
Research on the Energy-Efficient Non-Uniform Clustering LWSN Routing Protocol Based on Improved PSO for ARTFMR
To address the challenges of improving energy balance and extending the operational lifetime of wireless sensor networks for Automated Railway Track Fastener Maintenance Robots (ARTFMR) along railways, this paper proposes an enhanced LEACH protocol incorporating Particle Swarm Optimization (PSO). Initially, network nodes are deployed, and their energy consumption is calculated to formulate a non-uniform deployment model aimed at improving energy balance, followed by network clustering. Subsequently, a routing protocol is designed, where the cluster head election mechanism integrates two critical factors—dynamic residual energy and distance to the base station—to facilitate dynamic and distributed cluster head rotation. During the communication phase, a Time Division Multiple Access (TDMA) scheduling mechanism is employed in conjunction with an inter-cluster multi-hop routing scheme. Additionally, a joint data-volume and energy optimization strategy is implemented to dynamically adjust the transmission data volume based on the residual energy of each node. Finally, simulations were conducted using MATLAB, and the results indicate that the proposed energy-balanced non-uniform deployment optimization strategy improves network energy utilization, effectively extends network lifetime, and exhibits favorable scalability.
- 26 December 2025
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 17 (1) , 17
Open AccessResearch on the Energy-Efficient Non-Uniform Clustering LWSN Routing Protocol Based on Improved PSO for ARTFMR
To address the challenges of improving energy balance and extending the operational lifetime of wireless sensor networks for Automated Railway Track Fastener Maintenance Robots (ARTFMR) along railways, this paper proposes an enhanced LEACH protocol incorporating Particle Swarm Optimization (PSO). Initially, network nodes are deployed, and their energy consumption is calculated to formulate a non-uniform deployment model aimed at improving energy balance, followed by network clustering. Subsequently, a routing protocol is designed, where the cluster head election mechanism integrates two critical factors—dynamic residual energy and distance to the base station—to facilitate dynamic and distributed cluster head rotation. During the communication phase, a Time Division Multiple Access (TDMA) scheduling mechanism is employed in conjunction with an inter-cluster multi-hop routing scheme. Additionally, a joint data-volume and energy optimization strategy is implemented to dynamically adjust the transmission data volume based on the residual energy of each node. Finally, simulations were conducted using MATLAB, and the results indicate that the proposed energy-balanced non-uniform deployment optimization strategy improves network energy utilization, effectively extends network lifetime, and exhibits favorable scalability.
- Open Access
- 12 December 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (24) , 13093
Two-Stage Multi-Label Detection Method for Railway Fasteners Based on Type-Guided Expert Model
Railway track fasteners, serving as critical connecting components, have a reliability that directly impacts railway operational safety. To address the performance bottlenecks of existing detection methods in handling complex scenarios with diverse fastener types and co-occurring multiple defects, this paper proposes a Type-Guided Expert Model-based Fastener Detection and Diagnosis framework (TGEM-FDD) based on You Only Look Once (YOLO) v8. This framework follows a “type-identification-first, defect-diagnosis-second” paradigm, decoupling the complex task: the first stage employs an enhanced YOLOv8s with Deepstar, SPPF-attention, and DySample (YOLOv8s-DSD) detector integrating Deepstar Block, Spatial Pyramid Pooling Fast with Attention (SPPF-Attention), and Dynamic Sample (DySample) modules for precise fastener localization and type identification; the second stage dynamically invokes a specialized multi-label classification “expert model” based on the identified type to achieve accurate diagnosis of multiple defects. This study constructs a multi-label fastener image dataset containing 4800 samples to support model training and validation. Experimental results demonstrate that the proposed YOLOv8s-DSD model achieves a remarkable 98.5% mean average precision at an Intersection over Union threshold of 0.5 (mAP@0.5) in the first-stage task, outperforming the original YOLOv8s baseline and several mainstream detection models. In end-to-end system performance evaluation, the TGEM-FDD framework attains a comprehensive Task mean average precision (Task mAP) of 88.1% and a macro-average F1 score for defect diagnosis of 86.5%, significantly surpassing unified single-model detection and multi-task separate-head methods. This effectively validates the superiority of the proposed approach in tackling fastener type diversity and defect multi-label complexity, offering a viable solution for fine-grained component management in complex industrial scenarios.
- 12 December 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (24) , 13093
Open AccessTwo-Stage Multi-Label Detection Method for Railway Fasteners Based on Type-Guided Expert Model
Railway track fasteners, serving as critical connecting components, have a reliability that directly impacts railway operational safety. To address the performance bottlenecks of existing detection methods in handling complex scenarios with diverse fastener types and co-occurring multiple defects, this paper proposes a Type-Guided Expert Model-based Fastener Detection and Diagnosis framework (TGEM-FDD) based on You Only Look Once (YOLO) v8. This framework follows a “type-identification-first, defect-diagnosis-second” paradigm, decoupling the complex task: the first stage employs an enhanced YOLOv8s with Deepstar, SPPF-attention, and DySample (YOLOv8s-DSD) detector integrating Deepstar Block, Spatial Pyramid Pooling Fast with Attention (SPPF-Attention), and Dynamic Sample (DySample) modules for precise fastener localization and type identification; the second stage dynamically invokes a specialized multi-label classification “expert model” based on the identified type to achieve accurate diagnosis of multiple defects. This study constructs a multi-label fastener image dataset containing 4800 samples to support model training and validation. Experimental results demonstrate that the proposed YOLOv8s-DSD model achieves a remarkable 98.5% mean average precision at an Intersection over Union threshold of 0.5 (mAP@0.5) in the first-stage task, outperforming the original YOLOv8s baseline and several mainstream detection models. In end-to-end system performance evaluation, the TGEM-FDD framework attains a comprehensive Task mean average precision (Task mAP) of 88.1% and a macro-average F1 score for defect diagnosis of 86.5%, significantly surpassing unified single-model detection and multi-task separate-head methods. This effectively validates the superiority of the proposed approach in tackling fastener type diversity and defect multi-label complexity, offering a viable solution for fine-grained component management in complex industrial scenarios.
- Open Access
- 11 September 2025
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 16 (9) , 513
Railway Fastener Defect Detection Model Based on Dual Attention and MobileNetv3
Defect detection in rail fasteners constitutes a fundamental requirement for ensuring safe and reliable railway operations. Confronted with increasingly demanding inspection requirements of modern rail networks, traditional manual visual inspection methods have proven inadequate. To achieve accurate, efficient, and intelligent detection of rail fasteners, this paper presents an enhanced YOLOv5m-based defect detection model. Firstly, a dual-attention mechanism comprising Squeeze-and-Excitation and Coordinate Attention modules is employed to enhance the model. Secondly, the network architecture is redesigned by adopting MobileNetv3 as the backbone while incorporating structures with Ghost Shuffle Convolution (GSConv) modules and lightweight upsampling operators to reduce computational overhead. Finally, the original CIoU loss function in YOLOv5 is replaced with SIoU to accelerate convergence rate during training. Experimental results on a custom-built rail fastener dataset comprising 6500 images demonstrate that the enhanced model achieves 96.5% mAP and 17.9 FPS, surpassing the baseline by 3.1% and 2.1 FPS, respectively. Compared to existing detection models, this solution exhibits higher accuracy, faster inference, and lower memory consumption, providing critical technical support for edge deployment of rail fastener defect detection systems.
- 11 September 2025
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 16 (9) , 513
Open AccessRailway Fastener Defect Detection Model Based on Dual Attention and MobileNetv3
Defect detection in rail fasteners constitutes a fundamental requirement for ensuring safe and reliable railway operations. Confronted with increasingly demanding inspection requirements of modern rail networks, traditional manual visual inspection methods have proven inadequate. To achieve accurate, efficient, and intelligent detection of rail fasteners, this paper presents an enhanced YOLOv5m-based defect detection model. Firstly, a dual-attention mechanism comprising Squeeze-and-Excitation and Coordinate Attention modules is employed to enhance the model. Secondly, the network architecture is redesigned by adopting MobileNetv3 as the backbone while incorporating structures with Ghost Shuffle Convolution (GSConv) modules and lightweight upsampling operators to reduce computational overhead. Finally, the original CIoU loss function in YOLOv5 is replaced with SIoU to accelerate convergence rate during training. Experimental results on a custom-built rail fastener dataset comprising 6500 images demonstrate that the enhanced model achieves 96.5% mAP and 17.9 FPS, surpassing the baseline by 3.1% and 2.1 FPS, respectively. Compared to existing detection models, this solution exhibits higher accuracy, faster inference, and lower memory consumption, providing critical technical support for edge deployment of rail fastener defect detection systems.
- Open Access
Non-Uniform Deployment of LWSN for Automated Railway Track Fastener Maintenance Robot and GA-LEACH Optimization
WSNs are an important component of the Internet of Things (IoT), and the research on their routing protocols has always been a hot topic in academia. However, in ARTFMRs’ collaborative operation along railway lines, there are common problems such as energy holes, high latency, and uneven energy consumption in LWSNs. To address these issues, this paper proposes a genetic algorithm-optimized energy-aware routing protocol (GAECRPQ). Firstly, a non-uniform deployment strategy of three-line isosceles triangles is constructed to enhance coverage and balance node distribution. Secondly, an energy–distance adaptive weighting mechanism based on a genetic algorithm is introduced for cluster head (CH) selection to reduce energy consumption in hotspots and extend the network lifetime. Finally, a task-aware TDMA dynamic time slot allocation method is proposed, which incorporates the real-time task status of ARTFMRs into communication scheduling to achieve priority transmission under latency constraints. The simulation results show, that compared with six unequal clustering protocols—EADUC, EAUCA, EBUC, EEUC, LEACH, and LEACH-C—the three-line isosceles triangle deployment has a wider coverage area, and the GAECRPQ protocol increases the network lifetime by 7.4%, the lifetime by 40%, and reduces the average latency by 55.77%, 53.07%, 47.61%, 39.87%, 52.08%, and 50.48%, respectively. This verifies that GAECRPQ has good performance in terms of network lifetime and energy utilization efficiency, providing a practical solution for the collaborative operation of ARTFMRs in railway maintenance scenarios.
Open AccessNon-Uniform Deployment of LWSN for Automated Railway Track Fastener Maintenance Robot and GA-LEACH Optimization
WSNs are an important component of the Internet of Things (IoT), and the research on their routing protocols has always been a hot topic in academia. However, in ARTFMRs’ collaborative operation along railway lines, there are common problems such as energy holes, high latency, and uneven energy consumption in LWSNs. To address these issues, this paper proposes a genetic algorithm-optimized energy-aware routing protocol (GAECRPQ). Firstly, a non-uniform deployment strategy of three-line isosceles triangles is constructed to enhance coverage and balance node distribution. Secondly, an energy–distance adaptive weighting mechanism based on a genetic algorithm is introduced for cluster head (CH) selection to reduce energy consumption in hotspots and extend the network lifetime. Finally, a task-aware TDMA dynamic time slot allocation method is proposed, which incorporates the real-time task status of ARTFMRs into communication scheduling to achieve priority transmission under latency constraints. The simulation results show, that compared with six unequal clustering protocols—EADUC, EAUCA, EBUC, EEUC, LEACH, and LEACH-C—the three-line isosceles triangle deployment has a wider coverage area, and the GAECRPQ protocol increases the network lifetime by 7.4%, the lifetime by 40%, and reduces the average latency by 55.77%, 53.07%, 47.61%, 39.87%, 52.08%, and 50.48%, respectively. This verifies that GAECRPQ has good performance in terms of network lifetime and energy utilization efficiency, providing a practical solution for the collaborative operation of ARTFMRs in railway maintenance scenarios.
- Open Access
- 2 July 2025
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 16 (7) , 367
A Semi-Active Control Method for Trains Based on Fuzzy Rules of Non-Stationary Wind Fields
The stochastic fluctuation characteristics of wind speed can significantly affect the control performance of train suspension systems. To enhance the running quality of trains in non-stationary wind fields, this paper proposes a semi-active control method for trains based on fuzzy rules of non-stationary wind fields. Firstly, a dynamic model of the train and suspension system was established based on the CRH2 (China Railway High-Speed 2) high-speed train and magnetorheological dampers. Then, using frequency–time transformation technology, the non-stationary wind load excitation and train response patterns under 36 common operating conditions were calculated. Finally, by analyzing the response patterns of the train under different operating conditions, a comprehensive control rule table for the semi-active suspension system of the train under non-stationary wind fields was established, and a fuzzy controller suitable for non-stationary wind fields was designed. To verify the effectiveness of the proposed method, the running smoothness of the train was analyzed using a train-semi-active suspension system co-simulation model based on real wind speed data from the Lanzhou–Xinjiang railway line. The results demonstrate that the proposed method significantly improves the running quality of the train. Specifically, when the wind speed reaches 20 m/s and the train speed reaches 200 km/h, the lateral Sperling index is increased by 46.4% compared to the optimal standard index, and the vertical Sperling index is increased by 71.6% compared to the optimal standard index.
- 2 July 2025
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 16 (7) , 367
Open AccessA Semi-Active Control Method for Trains Based on Fuzzy Rules of Non-Stationary Wind Fields
The stochastic fluctuation characteristics of wind speed can significantly affect the control performance of train suspension systems. To enhance the running quality of trains in non-stationary wind fields, this paper proposes a semi-active control method for trains based on fuzzy rules of non-stationary wind fields. Firstly, a dynamic model of the train and suspension system was established based on the CRH2 (China Railway High-Speed 2) high-speed train and magnetorheological dampers. Then, using frequency–time transformation technology, the non-stationary wind load excitation and train response patterns under 36 common operating conditions were calculated. Finally, by analyzing the response patterns of the train under different operating conditions, a comprehensive control rule table for the semi-active suspension system of the train under non-stationary wind fields was established, and a fuzzy controller suitable for non-stationary wind fields was designed. To verify the effectiveness of the proposed method, the running smoothness of the train was analyzed using a train-semi-active suspension system co-simulation model based on real wind speed data from the Lanzhou–Xinjiang railway line. The results demonstrate that the proposed method significantly improves the running quality of the train. Specifically, when the wind speed reaches 20 m/s and the train speed reaches 200 km/h, the lateral Sperling index is increased by 46.4% compared to the optimal standard index, and the vertical Sperling index is increased by 71.6% compared to the optimal standard index.
- Open Access
A Study on Multi-Robot Task Allocation in Railway Scenarios Based on the Improved NSGA-II Algorithm
With the advent of Industry 4.0, the seamless integration of industrial systems and unmanned technologies has significantly accelerated the development of smart industries. However, the research on task allocation for railway maintenance robots remains limited, particularly with respect to optimizing costs and efficiency within smart railway systems. To address this gap, the present study explores multi-robot task allocation for automated orbital bolt maintenance, aiming to enhance operational efficiency by minimizing both makespan and total travel distance for all robots. To achieve this, an improved hybrid algorithm combining NSGA-II and MOPSO is proposed. Initially, a dynamic task planning method, tailored to the specific conditions of railway operations, is developed. This method uses the coordinates of track bolts to extract environmental features, enabling the dynamic partitioning of task areas. Subsequently, a multi-elite archive strategy is introduced, along with an adaptive mechanism for adjusting crossover and mutation probabilities. This ensures the preservation and maintenance of multiple solutions across various Pareto fronts, effectively mitigating the premature convergence commonly observed in traditional NSGA-II algorithms. Moreover, the integration of the MOPSO algorithm strikes a balance between local and global search capabilities, thereby enhancing both optimization efficiency and solution quality. Finally, a series of experiments, conducted with varying task sizes and robot quantities during the railway maintenance window, validate the effectiveness and improved performance of the proposed algorithm in addressing the multi-robot task allocation problem.
Open AccessA Study on Multi-Robot Task Allocation in Railway Scenarios Based on the Improved NSGA-II Algorithm
With the advent of Industry 4.0, the seamless integration of industrial systems and unmanned technologies has significantly accelerated the development of smart industries. However, the research on task allocation for railway maintenance robots remains limited, particularly with respect to optimizing costs and efficiency within smart railway systems. To address this gap, the present study explores multi-robot task allocation for automated orbital bolt maintenance, aiming to enhance operational efficiency by minimizing both makespan and total travel distance for all robots. To achieve this, an improved hybrid algorithm combining NSGA-II and MOPSO is proposed. Initially, a dynamic task planning method, tailored to the specific conditions of railway operations, is developed. This method uses the coordinates of track bolts to extract environmental features, enabling the dynamic partitioning of task areas. Subsequently, a multi-elite archive strategy is introduced, along with an adaptive mechanism for adjusting crossover and mutation probabilities. This ensures the preservation and maintenance of multiple solutions across various Pareto fronts, effectively mitigating the premature convergence commonly observed in traditional NSGA-II algorithms. Moreover, the integration of the MOPSO algorithm strikes a balance between local and global search capabilities, thereby enhancing both optimization efficiency and solution quality. Finally, a series of experiments, conducted with varying task sizes and robot quantities during the railway maintenance window, validate the effectiveness and improved performance of the proposed algorithm in addressing the multi-robot task allocation problem.