OYOleksandr Yuriev

Oleksandr Yuriev

*This is an algorithmically generated author record based on publicly available information.

Oleksandr Yuriev has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    МОДЕЛЮВАННЯ НАПРУЖЕНО-ДЕФОРМОВАНОГО СТАНУ РОБОЧОГО ОРГАНУГНУЧКОГО ТРУБЧАСТОГО ШНЕКОВОГО ТРАНСПОРТЕРА

    by Олег Ляшук, Юрій Омелянський, Олександр Юр’єВ

    The paper investigates the stress-strain state of the working body of a flexible tubular screw conveyor designed for transporting bulk, granular, and lumpy materials along complex spatial trajectories. The relevance of the study is determined by the need to improve the reliability, durability, and operational efficiency of flexible screw conveying systems, in which the working body is subjected during operation to a complex combination of axial, torsional, contact, and dynamic loads. Particular attention is paid to the analysis of a flexible rope screw conveyor with helical winding, which, during material transportation, operates under conditions of simultaneous tension, torsion, and interaction with the conveyed material. Within the study, analytical dependencies are obtained for determining the axial and angular displacements of the flexible rod system under different conditions of fixing the right support. Two structural variants are considered: with the right support fixed against axial displacement and without such fixation. This made it possible to evaluate the influence of boundary conditions on the deformation behavior of the working body and on the variation of stresses along its length. To assess the strength of the flexible rope, the Huber–Mises energy criterion was applied, which made it possible to determine equivalent stresses under the combined action of tension and torsion. The constructed graphical dependencies showed that equivalent stresses have a clearly expressed nonlinear pattern of variation depending on the wire winding angle, angular deformation, and rope diameter. It was established that an increase in angular deformation leads to an intensive increase in the level of equivalent stresses, especially within the ranges of winding angles where the influence of shear deformation components is most pronounced. A comparative analysis of single and double wire winding showed that double winding reduces equivalent stresses on average by 1.7–2.3 times due to the partial compensation of torsion-induced components. This confirms the feasibility of using double winding to increase the strength, fatigue resistance, and stability of the working body of a flexible screw conveyor.

  • Synthesis of Double-Action Brake Elements for Screw Conveyors

    by Oleg Lyashuk, Oleg Tson, Oleksandr Yuriev, Serhiy Pankiv, Anna Tson

    Oleg Lyashuk, Professor, Doctor of Technical Sciences, Professor of Automobiles Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0003-4881-8568, e-mail: oleglashuk@ukr.net Oleg Tson, Associate Professor, Candidate in Technical Sciences, Associate Professor of Automobiles Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0003-1056-4697, e-mail: tsonoleg@gmail.com Oleksandr Yuriev, PhD student in Industrial Mechanical Engineering, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0009-0006-6171-4842, e-mail: yurolex7@gmail.com Serhiy Pankiv, PhD student in Industrial Mechanical Engineering, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0078-0023-6141-4892, e-mail: pankiv@gmail.com Hanna Tson, Candidate of Technical Sciences, Senior Lecturer of Technical Mechanics and Agricultural Machinery Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0002-8561-8023, e-mail: anndutka@ukr.net. The article presents the synthesis and design of braking elements for double-action overrun clutches intended for use in screw conveyors. The performance and reliability of such conveyors significantly depend on the appropriate configuration and accurate calculation of their key structural, kinematic, and dynamic parameters. A critical issue addressed is the jamming of bulk materials between the rotating screw surface and the stationary housing, which can lead to damage of transported goods, mechanical failures, and productivity losses. To mitigate these problems, a novel design of a double-action overrun clutch with integrated cylindrical braking sectors is proposed. The clutch assembly includes a drive sprocket rigidly connected to an outer race, inside of which a rolling bearing is mounted on a drive shaft. Between the sprocket and an external cup, a segmented cylindrical braking element with expansion springs is installed. This configuration ensures controlled torque transfer and provides reverse rotation capability in case of screw jamming, allowing the conveyor system to self-release from overload conditions. A key focus of the study is the implementation of automated assembly synthesis using the “reverse synthesis method” introduced by V.A. Pasichnyk. This approach models the disassembly process to derive feasible assembly sequences, significantly reducing computational complexity and enabling the analysis of assemblies with more than 30 parts. The method utilizes binary constraint matrices (BCOM) to represent mechanical relationships and constraints between components. The process is integrated into a SolidWorks-based CAD/CAM environment, supported by custom-developed software that generates motion restriction maps and automates the identification of mechanical joints and contacts. The resulting models include 3D visualizations of the clutch and separator, detailed constraint tables, and assembly/disassembly graphs. This methodology enhances the automation, precision, and efficiency of the mechanical design process. It is particularly valuable for conveyor system applications where rapid prototyping and simulation are essential for operational reliability and safety.

  • Justification of the Design Parameters of the Additional Trimmer with an Active Knife

    by Oleksandr Okunskiy, Oleg Tson, Anna Tson, Roman Leshchuk, Oleksandr Yuriev

    Oleksandr Okunskiy, post-graduate, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, e-mail: Okunskyi@ukr.net, ORCID ID: 0009-0003-0096-3296 Oleg Tson, Associate Professor, PhD in Technics (Candidate of Technics Sciences), Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, e-mail: tson_oleg_@ukr.net, ORCID ID: 0000-0003-1056-4697 Anna Tson, PhD in Technics (Candidate of Technics Sciences), Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, e-mail: anndutka@ukr.net, ORCID ID: 0000-0002-8561-8023 Roman Leshchuk, Associate Professor, PhD in Technics (Candidate of Technics Sciences), Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, Україна, e-mail: r_leshchuk@ukr.net, ORCID ID: 0000-0002-0380-2063 Oleksandr Yuriev, post-graduate, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, e-mail: yurolex7@gmail.com, ORCID ID: 0009-0006-6171-4842 To substantiate the parameters of the top-dressing module during its design and development stage, it is advisable to conduct a theoretical analysis of possible variants for performing the technological operation of removing plant components from root crops. This will allow for the determination of technological parameters for the operation of the top-dressing module, including optimal movement speeds, angles of installation, and positioning of flat knives, ensuring maximum cleaning efficiency with minimal product loss. Based on the analysis of research into the technological process of additional cleaning of top residues from root crop heads, it has been established that there is a need for more advanced mathematical models of the interaction between the cutting organ and the root crops. These models should incorporate the analysis of kinematic and structural parameters of the top-dressing machine's working organs. Implementing such models will allow for more accurate forecasting of the performance of various designs and settings of working organs, leading to improved cleaning quality of root crops, reduced product losses, and lower maintenance costs. A calculation scheme has been developed to determine the structural parameters of a beet top trimmer with an active flat knife. Analytical dependencies have been provided to coordinate the movement time of the active knife in both horizontal and vertical planes. An algorithm has been proposed to determine the required length of the active knife for the top-dressing trimmer, which ensures that the technological operation of removing top residues is performed in accordance with agronomic requirements. The paper describes an approach to mathematical modeling of soil behavior in the process of puncture as a flow of a rigid-plastic medium. The movement of the medium is considered in Euler coordinates. The working body is modeled by a completely solid cone. The main assumptions are stated and substantiated. Pressure was considered instead of average stress. The density of the deforming medium was assumed to be constant.Under pressure was understood excess pressure, i.e. pressure caused by the action of the effort of the working body during a puncture.It was believed that soil resistance is determined mainly by the resistance of a relatively narrow layer adjacent to the working body.Instead of Cartesian coordinates, spherical coordinates were used in this case.As a result, all the dependencies characterizing the rigid-plastic flow are analytically deduced ‒ the fields of velocities, deformation velocities and stresses.