Kamran Ghasemzadeh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kamran Ghasemzadeh has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Angelo Basile
CNR, Italy
5 shared publications - Adolfo Iulianelli
Institute of Membrane Technology of the National Research Council (CNR-ITM), Via P. Bucci 17C, 87036 Rende, Italy
3 shared publications - Seyyed Mohamad Sadati Tilebon
Chemical Engineering Department, Iran University of Science & Technology, Tehran, Iran
2 shared publications - A. Andarz
School of Chemical Engineering, College of Engineering, University of Tehran, Tehran 1417614418, Iran
1 shared publication - Abbas Aghaeinejad-Meybodi
Urmia University
1 shared publication Alireza Behrooz Sarand
1 shared publication
Latest Publications
- Open Access
Machine Learning–Driven Surrogate Modeling and Operating-Point Selection for a Microfluidic Diffusion-Membrane Platform for Transdermal Drug Delivery
Microfluidic diffusion systems provide a powerful in vitro platform for evaluating transdermal drug delivery (TDD), yet their predictive capability is often constrained by limited experimental datasets and nonlinear transport behavior across membrane—device configurations. This study integrates machine learning (ML) with microfluidic experimentation to develop accurate and generalizable surrogate models for cumulative drug permeation under different hydrodynamic and membrane conditions. This work presents an ML-augmented microfluidic TDD framework for predicting cumulative drug permeation from small experimental datasets. Caffeine cream permeation was examined across twelve device—membrane configurations (sMDC, mMDC, and LiveBox2 paired with PET, CA, rat skin, and alginate) at three perfusion flow rates. For each configuration, SVR, MLP, RFR, GBR, XGB, and KNN models were trained and cross-validated using only 33 experimental measurements. SVR showed the strongest overall performance among the evaluated models, achieving test R2 values typically above 0.97 and RMSE values of 2, accurately capturing the nonlinear time-flow-cumulative mass behavior of TDD profiles. A domain-bounded Gaussian-noise augmentation strategy was used to increase local sampling density while keeping augmented values within the experimentally observed time and cumulative-mass ranges. Polynomial equations were obtained from the predictions of SVR to capture the interaction between inputs and outputs. The trained SVR surrogates were then used for automated steady-state identification and surrogate-based operating-point selection, revealing the dependence of the selected flow rate on membrane permeability and device geometry. Alginate consistently delivered the highest steady-state cumulative mass across all systems (up to ~448 µg/cm2), establishing it as the most efficient TDD membrane among those evaluated. Finally, compact third-degree polynomial equations were derived from the SVR predictions, enabling explicit analytical prediction and rapid design-space exploration. Overall, these ML-derived models and analytical equations provide a fast, low-cost tool for predictive design, enabling rapid microfluidic system evaluation and operating-condition selection, and significantly accelerating the development and screening of next-generation TDD platforms.
Open AccessMachine Learning–Driven Surrogate Modeling and Operating-Point Selection for a Microfluidic Diffusion-Membrane Platform for Transdermal Drug Delivery
Microfluidic diffusion systems provide a powerful in vitro platform for evaluating transdermal drug delivery (TDD), yet their predictive capability is often constrained by limited experimental datasets and nonlinear transport behavior across membrane—device configurations. This study integrates machine learning (ML) with microfluidic experimentation to develop accurate and generalizable surrogate models for cumulative drug permeation under different hydrodynamic and membrane conditions. This work presents an ML-augmented microfluidic TDD framework for predicting cumulative drug permeation from small experimental datasets. Caffeine cream permeation was examined across twelve device—membrane configurations (sMDC, mMDC, and LiveBox2 paired with PET, CA, rat skin, and alginate) at three perfusion flow rates. For each configuration, SVR, MLP, RFR, GBR, XGB, and KNN models were trained and cross-validated using only 33 experimental measurements. SVR showed the strongest overall performance among the evaluated models, achieving test R2 values typically above 0.97 and RMSE values of 2, accurately capturing the nonlinear time-flow-cumulative mass behavior of TDD profiles. A domain-bounded Gaussian-noise augmentation strategy was used to increase local sampling density while keeping augmented values within the experimentally observed time and cumulative-mass ranges. Polynomial equations were obtained from the predictions of SVR to capture the interaction between inputs and outputs. The trained SVR surrogates were then used for automated steady-state identification and surrogate-based operating-point selection, revealing the dependence of the selected flow rate on membrane permeability and device geometry. Alginate consistently delivered the highest steady-state cumulative mass across all systems (up to ~448 µg/cm2), establishing it as the most efficient TDD membrane among those evaluated. Finally, compact third-degree polynomial equations were derived from the SVR predictions, enabling explicit analytical prediction and rapid design-space exploration. Overall, these ML-derived models and analytical equations provide a fast, low-cost tool for predictive design, enabling rapid microfluidic system evaluation and operating-condition selection, and significantly accelerating the development and screening of next-generation TDD platforms.
- Open Access
Membrane Reactors for Plastic and Biomass Waste Valorization: A Critical Review
The rapid accumulation of plastic and biomass waste has emerged as a major environmental and resource management challenge, driven by increasing global consumption, low recycling efficiency, and the long-term persistence of waste in natural ecosystems. Conventional valorization routes such as pyrolysis, gasification, reforming, and fermentation provide promising pathways for converting waste into fuels and chemicals, yet their industrial deployment remains constrained by thermodynamic limitations, tar formation, catalyst deactivation, high energy demand, and complex downstream separation requirements. Despite increasing research activity, a comprehensive review that systematically addresses membrane reactor (MR) mechanisms, configurations, and their specific applications in the valorization of both plastic and biomass waste remains lacking in the current literature. In recent years, MR technology has attracted increasing attention as a platform for process intensification, integrating reaction and selective separation within a single unit. By enabling in situ product removal, MRs shift reaction equilibria toward higher conversion, selectivity improvement, and a reduction in separation severity and overall energy consumption. This critical review provides a unified and systematic assessment of MR technologies for the valorization of plastic and biomass waste. Reactor configurations, membrane materials, transport mechanisms, and catalytic systems are comprehensively examined, with particular emphasis on hydrogen-selective, oxygen-permeable, and water-selective membranes and their roles in reforming, tar mitigation, and syngas upgrading. The techno-economic and environmental implications of MR integration are critically discussed, together with current technology readiness levels (TRLs) and scale-up challenges. Overall, this review highlights MRs as a versatile and enabling platform for next-generation waste-to-value technologies and outlines their potential role in supporting the transition toward circular, low-carbon fuel and chemical production.
Open AccessMembrane Reactors for Plastic and Biomass Waste Valorization: A Critical Review
The rapid accumulation of plastic and biomass waste has emerged as a major environmental and resource management challenge, driven by increasing global consumption, low recycling efficiency, and the long-term persistence of waste in natural ecosystems. Conventional valorization routes such as pyrolysis, gasification, reforming, and fermentation provide promising pathways for converting waste into fuels and chemicals, yet their industrial deployment remains constrained by thermodynamic limitations, tar formation, catalyst deactivation, high energy demand, and complex downstream separation requirements. Despite increasing research activity, a comprehensive review that systematically addresses membrane reactor (MR) mechanisms, configurations, and their specific applications in the valorization of both plastic and biomass waste remains lacking in the current literature. In recent years, MR technology has attracted increasing attention as a platform for process intensification, integrating reaction and selective separation within a single unit. By enabling in situ product removal, MRs shift reaction equilibria toward higher conversion, selectivity improvement, and a reduction in separation severity and overall energy consumption. This critical review provides a unified and systematic assessment of MR technologies for the valorization of plastic and biomass waste. Reactor configurations, membrane materials, transport mechanisms, and catalytic systems are comprehensively examined, with particular emphasis on hydrogen-selective, oxygen-permeable, and water-selective membranes and their roles in reforming, tar mitigation, and syngas upgrading. The techno-economic and environmental implications of MR integration are critically discussed, together with current technology readiness levels (TRLs) and scale-up challenges. Overall, this review highlights MRs as a versatile and enabling platform for next-generation waste-to-value technologies and outlines their potential role in supporting the transition toward circular, low-carbon fuel and chemical production.
- Open Access
- 12 December 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 201
Greener fuel production in membrane reactor via gas-to-liquid process intensification
- 12 December 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 201
Open AccessGreener fuel production in membrane reactor via gas-to-liquid process intensification
- Open Access
Performance Analysis of Silica Fluidized Bed Membrane Reactor for Hydrogen Production as a Green Process Using CFD Modelling
The main aim of this study deals with the potential evaluation of a fluidized bed membrane reactor (FBMR) for hydrogen production as a clean fuel carrier via methanol steam reforming reaction, comparing its performance with other reactors including packed bed membrane reactors (PBMR), fluidized bed reactors (FBR), and packed bed reactors (PBR). For this purpose, a two-dimensional, axisymmetric numerical model was developed using computational fluid dynamics (CFD) to simulate the reactor performances. Model accuracy was validated by comparing the simulation results for PBMR and PB with experimental data, showing an accurate agreement within them. The model was then employed to examine the effects of key operating parameters, including reaction temperature, pressure, steam-to-methanol molar ratio, and gas volumetric space velocity, on reactor performance in terms of methanol conversion, hydrogen yield, hydrogen recovery, and selectivity. At 573 K, 1 bar, a feed molar ratio of 3/1, and a space velocity of 9000 h−1, the PBMR reached the best results in terms of methanol conversion, hydrogen yield, hydrogen recovery, and hydrogen selectivity, such as 67.6%, 69.5%, 14.9%, and 97.1%, respectively. On the other hand, the FBMR demonstrated superior performance with respect to the latter reaching a methanol conversion of 98.3%, hydrogen yield of 95.8%, hydrogen recovery of 74.5%, and hydrogen selectivity of 97.4%. These findings indicate that the FBMR offers significantly better performance than the other reactor types studied in this work, making it a highly efficient method for hydrogen production through methanol steam reforming, and a promising pathway for clean energy generation.
Open AccessPerformance Analysis of Silica Fluidized Bed Membrane Reactor for Hydrogen Production as a Green Process Using CFD Modelling
The main aim of this study deals with the potential evaluation of a fluidized bed membrane reactor (FBMR) for hydrogen production as a clean fuel carrier via methanol steam reforming reaction, comparing its performance with other reactors including packed bed membrane reactors (PBMR), fluidized bed reactors (FBR), and packed bed reactors (PBR). For this purpose, a two-dimensional, axisymmetric numerical model was developed using computational fluid dynamics (CFD) to simulate the reactor performances. Model accuracy was validated by comparing the simulation results for PBMR and PB with experimental data, showing an accurate agreement within them. The model was then employed to examine the effects of key operating parameters, including reaction temperature, pressure, steam-to-methanol molar ratio, and gas volumetric space velocity, on reactor performance in terms of methanol conversion, hydrogen yield, hydrogen recovery, and selectivity. At 573 K, 1 bar, a feed molar ratio of 3/1, and a space velocity of 9000 h−1, the PBMR reached the best results in terms of methanol conversion, hydrogen yield, hydrogen recovery, and hydrogen selectivity, such as 67.6%, 69.5%, 14.9%, and 97.1%, respectively. On the other hand, the FBMR demonstrated superior performance with respect to the latter reaching a methanol conversion of 98.3%, hydrogen yield of 95.8%, hydrogen recovery of 74.5%, and hydrogen selectivity of 97.4%. These findings indicate that the FBMR offers significantly better performance than the other reactor types studied in this work, making it a highly efficient method for hydrogen production through methanol steam reforming, and a promising pathway for clean energy generation.
- Top Cited PapersOpen Access
- 29 January 2025
- Published by Royal Society of Chemistry (RSC) in RSC Sustainability
- Vol. 3 (6) , 2605-2618
Techno-economic assessment of biodiesel-derived crude glycerol purification processes
This study presents a comprehensive techno-economic assessment of three glycerol purification processes: Membrane Separation (MBP), Vacuum Distillation (VDP), and Ion Exchange Purification (IEP).
- 29 January 2025
- Published by Royal Society of Chemistry (RSC) in RSC Sustainability
- Vol. 3 (6) , 2605-2618
Top Cited PapersOpen AccessTechno-economic assessment of biodiesel-derived crude glycerol purification processes
This study presents a comprehensive techno-economic assessment of three glycerol purification processes: Membrane Separation (MBP), Vacuum Distillation (VDP), and Ion Exchange Purification (IEP).
- 14 January 2022
- Published by Elsevier
- p. 91-109
Transport phenomena in electrodialysis/reverse electrodialysis processes
- 14 January 2022
- Published by Elsevier
- p. 91-109
Transport phenomena in electrodialysis/reverse electrodialysis processes
- 1 January 2020
- Published by Elsevier
- p. 97-123
Membrane technologies for exhaust gas cleaning and carbon capture and sequestration
- 1 January 2020
- Published by Elsevier
- p. 97-123
Membrane technologies for exhaust gas cleaning and carbon capture and sequestration
- 12 October 2018
- Published by Elsevier
- p. 591-624
Membranes for NG Separation Processes