Shengbin Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Shengbin Li has a total of 95 co-authors. Here are the top co-authors by number of shared publications:
Yuanzhao Wu
CAS Key Laboratory of Magnetic Materials and Devices, Ningbo Institute of Materials Technology and Engineering
17 shared publicationsJie Shang
CAS Key Laboratory of Magnetic Materials and Devices Ningbo Institute of Materials Technology and Engineering Chinese Academy of Sciences Ningbo 315201 P. R. China
14 shared publications- Run-Wei Li
Ningbo Institute of Materials Technology and Engineering
13 shared publications - Yiwei Liu
Ningbo Institute of Materials Technology and Engineering Chinese Academy of Sciences Ningbo 315201 P. R. China
10 shared publications Fali Li
CAS Key Laboratory of Magnetic Materials and Devices Ningbo Institute of Materials Technology and Engineering Chinese Academy of Sciences Ningbo 315201 P. R. China
9 shared publicationsYiwei Liu
CAS Key Laboratory of Magnetic Materials and Devices Ningbo Institute of Materials Technology and Engineering Chinese Academy of Sciences Ningbo 315201 P. R. China
8 shared publications
Latest Publications
- Open Access
- 27 March 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Eco-sustainable magnetoresistive sensors towards disposable magnetoelectronics
This work presents a holistic integration of environmental sustainability and enhanced sensing performance throughout the full lifecycle of magnetoresistive sensors. Utilizing industry-scale screen-printing techniques combined with eco-friendly inks (formulated from engineered Fe/Fe 3 O 4 core-shell magnetic microparticles, bioderived polymeric binders, and water solvent), the fabrication process avoids harsh treatments and hazardous chemicals. The resulting sensors, constructed entirely from naturally sourced materials, inherently exhibit biocompatibility, biodegradability, and environmentally benign recyclability. These properties collectively demonstrate key attributes for a sustainable life cycle. Through rational engineering of the Fe/Fe 3 O 4 core-shell structure particles, two synergistic mechanisms are activated within the composite: spin-dependent hopping across Fe 3 O 4 shell grain boundaries and in situ magnetic flux concentration induced by Fe cores, thereby yielding an order-of-magnitude enhancement in low-field sensitivity relative to sputtered Fe film and printed Fe 3 O 4 particle-based counterparts, resulting in a higher magnetoresistance ratio at 10 mT relative to all printed magnetoresistive sensors reported previously. The convergence of eco-sustainability and high performance enables previously unattainable disposable magnetoelectronics, unlocking new opportunities for environmentally responsible and user-safe transient electronics and Internet of Things (IoT) applications.
- 27 March 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessEco-sustainable magnetoresistive sensors towards disposable magnetoelectronics
This work presents a holistic integration of environmental sustainability and enhanced sensing performance throughout the full lifecycle of magnetoresistive sensors. Utilizing industry-scale screen-printing techniques combined with eco-friendly inks (formulated from engineered Fe/Fe 3 O 4 core-shell magnetic microparticles, bioderived polymeric binders, and water solvent), the fabrication process avoids harsh treatments and hazardous chemicals. The resulting sensors, constructed entirely from naturally sourced materials, inherently exhibit biocompatibility, biodegradability, and environmentally benign recyclability. These properties collectively demonstrate key attributes for a sustainable life cycle. Through rational engineering of the Fe/Fe 3 O 4 core-shell structure particles, two synergistic mechanisms are activated within the composite: spin-dependent hopping across Fe 3 O 4 shell grain boundaries and in situ magnetic flux concentration induced by Fe cores, thereby yielding an order-of-magnitude enhancement in low-field sensitivity relative to sputtered Fe film and printed Fe 3 O 4 particle-based counterparts, resulting in a higher magnetoresistance ratio at 10 mT relative to all printed magnetoresistive sensors reported previously. The convergence of eco-sustainability and high performance enables previously unattainable disposable magnetoelectronics, unlocking new opportunities for environmentally responsible and user-safe transient electronics and Internet of Things (IoT) applications.
- Top Cited Papers
- 27 January 2025
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 10 (2) , 1063-1071
Piezo-Capacitive Flexible Pressure Sensor with Magnetically Self-Assembled Microneedle Array
Flexible pressure sensors are pivotal in advancing artificial intelligence, the Internet of Things (IoT), and wearable technologies. While microstructuring the functional layer of these sensors effectively enhances their performance, current fabrication methods often require complex equipment and time-consuming processes. Herein, we present a novel magnetization-induced self-assembly method to develop a magnetically grown microneedle array as a dielectric layer for flexible capacitive pressure sensors. By precisely controlling the magnetic particle concentration and dynamic magnetic field strength, we achieve a tunable microneedle morphology. The resulting sensor exhibits high sensitivity (4.11 kPa-1), an ultrafast response time (20 ms), excellent cyclic stability (≈1700 cycles), and flexibility. We demonstrate real-time monitoring of various physiological signals including pulse, grip force, breathing rate, and head motion. This study introduces a promising approach for fabricating high-performance flexible sensors, potentially enabling more intuitive and effective human-machine interactions.
- 27 January 2025
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 10 (2) , 1063-1071
Top Cited PapersPiezo-Capacitive Flexible Pressure Sensor with Magnetically Self-Assembled Microneedle Array
Flexible pressure sensors are pivotal in advancing artificial intelligence, the Internet of Things (IoT), and wearable technologies. While microstructuring the functional layer of these sensors effectively enhances their performance, current fabrication methods often require complex equipment and time-consuming processes. Herein, we present a novel magnetization-induced self-assembly method to develop a magnetically grown microneedle array as a dielectric layer for flexible capacitive pressure sensors. By precisely controlling the magnetic particle concentration and dynamic magnetic field strength, we achieve a tunable microneedle morphology. The resulting sensor exhibits high sensitivity (4.11 kPa-1), an ultrafast response time (20 ms), excellent cyclic stability (≈1700 cycles), and flexibility. We demonstrate real-time monitoring of various physiological signals including pulse, grip force, breathing rate, and head motion. This study introduces a promising approach for fabricating high-performance flexible sensors, potentially enabling more intuitive and effective human-machine interactions.
- 27 August 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (36) , 48025-48033
A Highly Sensitive 3D-Printed Flexible Sensor for Sensing Small Pressures in Deep-Sea High-Pressure Environment
The origin of life on Earth is believed to be from the ocean, which offers abundant resources in its depths. However, deep-sea operations are limited due to the lack of underwater robots and rigid grippers with sensitive force sensors. Therefore, it is crucial for deep-sea pressure sensors to be integrated with mechanical hands for manipulation. Here, a flexible stress sensor is presented that can function effectively under high water pressure in the deep ocean. Inspired by biological structures found in the abyssal zone, our sensor is designed with an internal and external pressure balance structure (hollow interlocking spherical structure). The digital light processing (DLP) three-dimensional (3D) printing technology is utilized to construct this complex structure after obtaining optimized structural parameters using finite element simulation. The sensor exhibits linear sensitivity of 0.114 kPa-1 within the range of 0-15 kPa and has an extremely short response time of 32 ms, good dynamic-static load response capability, and excellent resistance cycling stability. It shows high sensitivity of 1.74 kPa-1 even under 30 MPa static water pressures and the theoretical working pressure can exceed 110 MPa, which provides a new solution for deep-sea robots.
- 27 August 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (36) , 48025-48033
A Highly Sensitive 3D-Printed Flexible Sensor for Sensing Small Pressures in Deep-Sea High-Pressure Environment
The origin of life on Earth is believed to be from the ocean, which offers abundant resources in its depths. However, deep-sea operations are limited due to the lack of underwater robots and rigid grippers with sensitive force sensors. Therefore, it is crucial for deep-sea pressure sensors to be integrated with mechanical hands for manipulation. Here, a flexible stress sensor is presented that can function effectively under high water pressure in the deep ocean. Inspired by biological structures found in the abyssal zone, our sensor is designed with an internal and external pressure balance structure (hollow interlocking spherical structure). The digital light processing (DLP) three-dimensional (3D) printing technology is utilized to construct this complex structure after obtaining optimized structural parameters using finite element simulation. The sensor exhibits linear sensitivity of 0.114 kPa-1 within the range of 0-15 kPa and has an extremely short response time of 32 ms, good dynamic-static load response capability, and excellent resistance cycling stability. It shows high sensitivity of 1.74 kPa-1 even under 30 MPa static water pressures and the theoretical working pressure can exceed 110 MPa, which provides a new solution for deep-sea robots.
- Open Access
- 28 June 2024
- Published by Wiley in Advanced Science
- Vol. 11 (33) , e2403635
Quasi‐1D Conductive Network Composites for Ultra‐Sensitive Strain Sensing
Highly performance flexible strain sensor is a crucial component for wearable devices, human‐machine interfaces, and e‐skins. However, the sensitivity of the strain sensor is highly limited by the strain range for large destruction of the conductive network. Here the quasi‐1D conductive network (QCN) is proposed for the design of an ultra‐sensitive strain sensor. The orientation of the conductive particles can effectively reduce the number of redundant percolative pathways in the conductive composites. The maximum sensitivity will reach the upper limit when the whole composite remains only “one” percolation pathway. Besides, the QCN structure can also confine the tunnel electron spread through the rigid inclusions which significantly enlarges the strain‐resistance effect along the tensile direction. The strain sensor exhibits state‐of‐art performance including large gauge factor (862227), fast response time (24 ms), good durability (cycled 1000 times), and multi‐mechanical sensing ability (compression, bending, shearing, air flow vibration, etc.). Finally, the QCN sensor can be exploited to realize the human‐machine interface (HMI) application of acoustic signal recognition (instrument calibration) and spectrum restoration (voice parsing).
- 28 June 2024
- Published by Wiley in Advanced Science
- Vol. 11 (33) , e2403635
Open AccessQuasi‐1D Conductive Network Composites for Ultra‐Sensitive Strain Sensing
Highly performance flexible strain sensor is a crucial component for wearable devices, human‐machine interfaces, and e‐skins. However, the sensitivity of the strain sensor is highly limited by the strain range for large destruction of the conductive network. Here the quasi‐1D conductive network (QCN) is proposed for the design of an ultra‐sensitive strain sensor. The orientation of the conductive particles can effectively reduce the number of redundant percolative pathways in the conductive composites. The maximum sensitivity will reach the upper limit when the whole composite remains only “one” percolation pathway. Besides, the QCN structure can also confine the tunnel electron spread through the rigid inclusions which significantly enlarges the strain‐resistance effect along the tensile direction. The strain sensor exhibits state‐of‐art performance including large gauge factor (862227), fast response time (24 ms), good durability (cycled 1000 times), and multi‐mechanical sensing ability (compression, bending, shearing, air flow vibration, etc.). Finally, the QCN sensor can be exploited to realize the human‐machine interface (HMI) application of acoustic signal recognition (instrument calibration) and spectrum restoration (voice parsing).
- Top Cited Papers
- 29 May 2024
- Published by Wiley in Advanced Materials
- Vol. 36 (37) , e2311996
Advances in Flexible Magnetosensitive Materials and Devices for Wearable Electronics
Emerging fields, such as wearable electronics, digital healthcare, the Internet of Things, and humanoid robots, highlight the need for flexible devices capable of recording signals on curved surfaces and soft objects. In particular, flexible magnetosensitive devices garner significant attention owing to their ability to combine the advantages of flexible electronics and magnetoelectronic devices, such as reshaping capability, conformability, contactless sensing, and navigation capability. Several key challenges must be addressed to develop well‐functional flexible magnetic devices. These include determining how to make magnetic materials flexible and even elastic, understanding how the physical properties of magnetic films change under external strain and stress, and designing and constructing flexible magnetosensitive devices. In recent years, significant progress is made in addressing these challenges. This study aims to provide a timely and comprehensive overview of the most recent developments in flexible magnetosensitive devices. This includes discussions on the fabrications and mechanical regulations of flexible magnetic materials, the principles and performances of flexible magnetic sensors, and their applications for wearable electronics. In addition, future development trends and challenges in this field are discussed.
- 29 May 2024
- Published by Wiley in Advanced Materials
- Vol. 36 (37) , e2311996
Top Cited PapersAdvances in Flexible Magnetosensitive Materials and Devices for Wearable Electronics
Emerging fields, such as wearable electronics, digital healthcare, the Internet of Things, and humanoid robots, highlight the need for flexible devices capable of recording signals on curved surfaces and soft objects. In particular, flexible magnetosensitive devices garner significant attention owing to their ability to combine the advantages of flexible electronics and magnetoelectronic devices, such as reshaping capability, conformability, contactless sensing, and navigation capability. Several key challenges must be addressed to develop well‐functional flexible magnetic devices. These include determining how to make magnetic materials flexible and even elastic, understanding how the physical properties of magnetic films change under external strain and stress, and designing and constructing flexible magnetosensitive devices. In recent years, significant progress is made in addressing these challenges. This study aims to provide a timely and comprehensive overview of the most recent developments in flexible magnetosensitive devices. This includes discussions on the fabrications and mechanical regulations of flexible magnetic materials, the principles and performances of flexible magnetic sensors, and their applications for wearable electronics. In addition, future development trends and challenges in this field are discussed.
- Open Access
- 30 November 2023
- Published by Wiley in Advanced Science
- Vol. 11 (37)
Wearable Magnetic Field Sensor with Low Detection Limit and Wide Operation Range for Electronic Skin Applications
Flexible electronic devices extended abilities of humans to perceive their environment conveniently and comfortably. Among them, flexible magnetic field sensors are crucial to detect changes in the external magnetic field. State‐of‐the‐art flexible magnetoelectronics do not exhibit low detection limit and large working range simultaneously, which limits their application potential. Herein, a flexible magnetic field sensor possessing a low detection limit of 22 nT and wide sensing range from 22 nT up to 400 mT is reported. With the detection range of seven orders of magnitude in magnetic field sensor constitutes at least one order of magnitude improvement over current flexible magnetic field sensor technologies. The sensor is designed as a cantilever beam structure accommodating a flexible permanent magnetic composite and an amorphous magnetic wire enabling sensitivity to low magnetic fields. To detect high fields, the anisotropy of the giant magnetoimpedance effect of amorphous magnetic wires to the magnetic field direction is explored. Benefiting from mechanical flexibility of sensor and its broad detection range, its application potential for smart wearables targeting geomagnetic navigation, touchless interactivity, rehabilitation appliances, and safety interfaces providing warnings of exposure to high magnetic fields are explored.
- 30 November 2023
- Published by Wiley in Advanced Science
- Vol. 11 (37)
Open AccessWearable Magnetic Field Sensor with Low Detection Limit and Wide Operation Range for Electronic Skin Applications
Flexible electronic devices extended abilities of humans to perceive their environment conveniently and comfortably. Among them, flexible magnetic field sensors are crucial to detect changes in the external magnetic field. State‐of‐the‐art flexible magnetoelectronics do not exhibit low detection limit and large working range simultaneously, which limits their application potential. Herein, a flexible magnetic field sensor possessing a low detection limit of 22 nT and wide sensing range from 22 nT up to 400 mT is reported. With the detection range of seven orders of magnitude in magnetic field sensor constitutes at least one order of magnitude improvement over current flexible magnetic field sensor technologies. The sensor is designed as a cantilever beam structure accommodating a flexible permanent magnetic composite and an amorphous magnetic wire enabling sensitivity to low magnetic fields. To detect high fields, the anisotropy of the giant magnetoimpedance effect of amorphous magnetic wires to the magnetic field direction is explored. Benefiting from mechanical flexibility of sensor and its broad detection range, its application potential for smart wearables targeting geomagnetic navigation, touchless interactivity, rehabilitation appliances, and safety interfaces providing warnings of exposure to high magnetic fields are explored.
Size Dependent Phase Transformation of Liquid Gallium
As the most popular liquid metal (LM), gallium (Ga) and its alloys are emerging as functional materials due to their unique combination of fluidic and metallic properties near room temperature. As an important branch of utilizing LMs, micro‐ and submicron‐particles of Ga‐based LM are widely employed in wearable electronics, catalysis, energy, and biomedicine. Meanwhile, the phase transition is crucial not only for the applications based on this reversible transformation process, but also for the solidification temperature at which fluid properties are lost. While Ga has several solid phases and exhibits unusual size‐dependent phase behavior. This complex process makes the phase transition and undercooling of Ga uncontrollable, which considerably affects the application performance. In this work, extensive (nano‐)calorimetry experiments are performed to investigate the polymorph selection mechanism during liquid Ga crystallization. It is surprisingly found that the crystallization temperature and crystallization pathway to either α −Ga or β −Ga can be effectively engineered by thermal treatment and droplet size. The polymorph selection process is suggested to be highly relevant to the capability of forming covalent bonds in the equilibrium supercooled liquid. The observation of two different crystallization pathways depending on the annealing temperature may indicate that there exist two different liquid phases in Ga.
Size Dependent Phase Transformation of Liquid Gallium
As the most popular liquid metal (LM), gallium (Ga) and its alloys are emerging as functional materials due to their unique combination of fluidic and metallic properties near room temperature. As an important branch of utilizing LMs, micro‐ and submicron‐particles of Ga‐based LM are widely employed in wearable electronics, catalysis, energy, and biomedicine. Meanwhile, the phase transition is crucial not only for the applications based on this reversible transformation process, but also for the solidification temperature at which fluid properties are lost. While Ga has several solid phases and exhibits unusual size‐dependent phase behavior. This complex process makes the phase transition and undercooling of Ga uncontrollable, which considerably affects the application performance. In this work, extensive (nano‐)calorimetry experiments are performed to investigate the polymorph selection mechanism during liquid Ga crystallization. It is surprisingly found that the crystallization temperature and crystallization pathway to either α −Ga or β −Ga can be effectively engineered by thermal treatment and droplet size. The polymorph selection process is suggested to be highly relevant to the capability of forming covalent bonds in the equilibrium supercooled liquid. The observation of two different crystallization pathways depending on the annealing temperature may indicate that there exist two different liquid phases in Ga.
- 26 September 2023
- Published by Elsevier in Materials Today Physics
- Vol. 38
Intrinsically conductive and nano-scale reconfigurable liquid metal nano-capsules
- 26 September 2023
- Published by Elsevier in Materials Today Physics
- Vol. 38
Intrinsically conductive and nano-scale reconfigurable liquid metal nano-capsules
- Open Access
- 11 July 2023
- Published by Springer Nature in npj Flexible Electronics
- Vol. 7 (1) , 1-9
Ultra-conformable liquid metal particle monolayer on air/water interface for substrate-free E-tattoo
Gallium-based liquid metal has gained significant attention in conformal flexible electronics due to its high electrical conductivity, intrinsic deformability, and biocompatibility. However, the fabrication of large-area and highly uniform conformal liquid metal films remains challenging. Interfacial self-assembly has emerged as a promising method, but traditional approaches face difficulties in assembling liquid metal particles. Here, we realized the multi-size universal self-assembly (MUS) for liquid metal particles with various diameters (100 cm2) and high floating yield (50–90%). Moreover, the films can be conformally transferred onto complex surfaces such as human skin, allowing for the fabrication of substrate-free flexible devices. This eliminates interference from traditional substrate mechanical responses, making the liquid metal e-tattoo more user-friendly.
- 11 July 2023
- Published by Springer Nature in npj Flexible Electronics
- Vol. 7 (1) , 1-9
Open AccessUltra-conformable liquid metal particle monolayer on air/water interface for substrate-free E-tattoo
Gallium-based liquid metal has gained significant attention in conformal flexible electronics due to its high electrical conductivity, intrinsic deformability, and biocompatibility. However, the fabrication of large-area and highly uniform conformal liquid metal films remains challenging. Interfacial self-assembly has emerged as a promising method, but traditional approaches face difficulties in assembling liquid metal particles. Here, we realized the multi-size universal self-assembly (MUS) for liquid metal particles with various diameters (100 cm2) and high floating yield (50–90%). Moreover, the films can be conformally transferred onto complex surfaces such as human skin, allowing for the fabrication of substrate-free flexible devices. This eliminates interference from traditional substrate mechanical responses, making the liquid metal e-tattoo more user-friendly.
- 21 April 2023
- Published by Elsevier in Energy Conversion and Management
- Vol. 286
Electromagnetic vibration energy harvester using magnetic fluid as lubricant and liquid spring
- 21 April 2023
- Published by Elsevier in Energy Conversion and Management
- Vol. 286
Electromagnetic vibration energy harvester using magnetic fluid as lubricant and liquid spring