Fulang Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Fulang Liu has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Ronghai Qu
Huazhong University of Science and Technology
4 shared publications - Yuanzhi Zhang
Huazhong University of Science and Technology
4 shared publications - Dawei Li
Huazhong University of Science and Technology
3 shared publications - Xinggang Fan
State Key Laboratory of High-Density Electrical Energy Conversion, Huazhong University of Science and Technology, Wuhan, China
3 shared publications - Xinhong Gao
School of Eletrical and Electronic Engineering, Huazhong University of Science and Technology, Wuhan, China
3 shared publications - Feng Xiong
School of Electrical and Electronic Engineering, Huazhong University of Science and Technology, Wuhan, China
2 shared publications
Latest Publications
- 9 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (5) , 1-6
Cooling Design for the Rotor of a 200 kW Aviation Superconducting Motor
This paper presents the design of rotor cooling for a 200 kW, 2000 rpm high-speed superconducting machine for aviation applications. The rotor employs immersion cooling with subcooled liquid nitrogen, while the superconducting magnet operates at 70 K. In this superconducting machine, a novel triple conduit coaxial structure has been developed to deliver subcooled liquid nitrogen from the cryogenic reservoir into the high-speed rotating magnet. This structure is integrated within the motor shaft and, compared to conventional rotary cryogenic couplings, significantly reduces the overall system size, increases the torque density, and offers a simpler configuration with enhanced operational reliability. Inside the rotor, an efficient cooling flow path is designed to ensure direct contact between the magnet and the subcooled liquid nitrogen, allowing uniform circumferential exposure and more effective thermal management. Finally, computational fluid dynamics (CFD) simulations were conducted to evaluate the proposed design, demonstrating satisfactory cooling uniformity across the superconducting magnet and reliable performance of the coaxial conduit assembly.
- 9 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (5) , 1-6
Cooling Design for the Rotor of a 200 kW Aviation Superconducting Motor
This paper presents the design of rotor cooling for a 200 kW, 2000 rpm high-speed superconducting machine for aviation applications. The rotor employs immersion cooling with subcooled liquid nitrogen, while the superconducting magnet operates at 70 K. In this superconducting machine, a novel triple conduit coaxial structure has been developed to deliver subcooled liquid nitrogen from the cryogenic reservoir into the high-speed rotating magnet. This structure is integrated within the motor shaft and, compared to conventional rotary cryogenic couplings, significantly reduces the overall system size, increases the torque density, and offers a simpler configuration with enhanced operational reliability. Inside the rotor, an efficient cooling flow path is designed to ensure direct contact between the magnet and the subcooled liquid nitrogen, allowing uniform circumferential exposure and more effective thermal management. Finally, computational fluid dynamics (CFD) simulations were conducted to evaluate the proposed design, demonstrating satisfactory cooling uniformity across the superconducting magnet and reliable performance of the coaxial conduit assembly.
- 5 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (5) , 1-5
Design and Analysis of Rotor Structure Support for Spoke Type Superconducting Motor
The superconducting motor has prospects of a wide range of applications in aviation electric propulsion thanks to its advantages such as small size, high power density and high efficiency. However, the support structure design of superconducting motors is difficult to balance the structural strength and low heat leakage at high rotational speeds. In addition, by adopting the topological form of a spoke-type superconducting synchronous motor, the number of pole pairs in compact superconducting motors can be significantly increased and the power density of the motor can be improved. In this context, this paper proposes a spoke-type rotor support structure design for high-temperature superconducting (HTS) motors with consideration of electromagnetic properties, mechanical strength and cooling architecture. Based on the analysis of the electromagnetic topology, this paper demonstrates a modular assembly method for the rotor. In addition, the rotor core is connected to the ambient temperature shaft through a glass fiber reinforced plastic (GFRP) bracket in order to ensure good strength, controlled deformation, and low heat leakage. To verify the feasibility of this structure, the rotor stresses are analyzed by three-dimensional (3D) finite element analysis (FEA). The results show that this structure has good mechanical strength, which is conducive to maintaining the electromagnetic, mechanical environment of the motor and protecting the HTS magnets.
- 5 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (5) , 1-5
Design and Analysis of Rotor Structure Support for Spoke Type Superconducting Motor
The superconducting motor has prospects of a wide range of applications in aviation electric propulsion thanks to its advantages such as small size, high power density and high efficiency. However, the support structure design of superconducting motors is difficult to balance the structural strength and low heat leakage at high rotational speeds. In addition, by adopting the topological form of a spoke-type superconducting synchronous motor, the number of pole pairs in compact superconducting motors can be significantly increased and the power density of the motor can be improved. In this context, this paper proposes a spoke-type rotor support structure design for high-temperature superconducting (HTS) motors with consideration of electromagnetic properties, mechanical strength and cooling architecture. Based on the analysis of the electromagnetic topology, this paper demonstrates a modular assembly method for the rotor. In addition, the rotor core is connected to the ambient temperature shaft through a glass fiber reinforced plastic (GFRP) bracket in order to ensure good strength, controlled deformation, and low heat leakage. To verify the feasibility of this structure, the rotor stresses are analyzed by three-dimensional (3D) finite element analysis (FEA). The results show that this structure has good mechanical strength, which is conducive to maintaining the electromagnetic, mechanical environment of the motor and protecting the HTS magnets.
- 10 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-6
A Novel Convection Cooled Cryogenic System for Air Core High-Speed Superconducting Machine
To enhance the integration and power density of superconducting motors, this paper designs a cooling structure applicable to high-speed air-core rotor superconducting motors. By creating cavity within the magnetic support structure of the air-core rotor to facilitate forced convection cooling of the magnets, both support and cooling functions for the superconducting magnets are simultaneously achieved. Based on an analysis of the motor's heat sources and boundary conditions, CFD simulations were conducted on the cooling structure of a single superconducting magnet to verify the feasibility of this structure for cooling air-core rotor superconducting motors. The helium flow vector direction within the helium chamber was further analyzed to optimize the structure. A flow guide structure was introduced, and CFD simulations under the same boundary conditions and heat source analysis were performed to verify the optimization of the temperature and fluid fields. This structure significantly improves the temperature margin and uniformity of temperature distribution for the superconducting magnets in air-core rotor superconducting motors, effectively preventing magnet quenching. Furthermore, for applications requiring high volumetric power density, this structure not only fulfills the cooling function but also greatly enhances the integration and volumetric power density of the air-core rotor superconducting motor.
- 10 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-6
A Novel Convection Cooled Cryogenic System for Air Core High-Speed Superconducting Machine
To enhance the integration and power density of superconducting motors, this paper designs a cooling structure applicable to high-speed air-core rotor superconducting motors. By creating cavity within the magnetic support structure of the air-core rotor to facilitate forced convection cooling of the magnets, both support and cooling functions for the superconducting magnets are simultaneously achieved. Based on an analysis of the motor's heat sources and boundary conditions, CFD simulations were conducted on the cooling structure of a single superconducting magnet to verify the feasibility of this structure for cooling air-core rotor superconducting motors. The helium flow vector direction within the helium chamber was further analyzed to optimize the structure. A flow guide structure was introduced, and CFD simulations under the same boundary conditions and heat source analysis were performed to verify the optimization of the temperature and fluid fields. This structure significantly improves the temperature margin and uniformity of temperature distribution for the superconducting magnets in air-core rotor superconducting motors, effectively preventing magnet quenching. Furthermore, for applications requiring high volumetric power density, this structure not only fulfills the cooling function but also greatly enhances the integration and volumetric power density of the air-core rotor superconducting motor.