Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Fangfang Zeng has a total of 85 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    First-Principles Investigation of Electronic Structures and Optical Properties of TiS2 (001) Surface

    by Jiang Zou, Yixuan Wang, Weifu Cen, Fangfang Zeng

    This study investigates the optical characteristics and electronic structure of the (001) surface of TiS2 using first-principles calculations. The electronic structure of the TiS2 (001) surface was determined to be analogous to that of its bulk counterpart. The band gap of the TiS2 (001) surface is 0.91 eV, and it is 0.81 eV for bulk TiS2. Nevertheless, there is a marked discrepancy in the density of states distribution close to the Fermi level, which could be ascribed to van der Waals forces between layers. When the Ti 3d and S 2p electrons transition, they are not influenced by van der Waals forces for the TiS2 (001) surface, while those in bulk are influenced by van der Waals forces. The results of optical properties show that the dielectric constant of the TiS2 (001) surface is less than that of bulk TiS2. The dielectric peak band edge, extinction coefficient band edge, and absorption band edge of the TiS2 (001) surface show a red shift. The reason for this phenomenon is that the polarization energy of the TiS2 (001) surface is smaller than that of bulk TiS2, and the displacement polarization of the surface decreases. Based on the electronic structure and optical properties results, the electrons of the TiS2 (001) surface are more active, easier to excite, and easier to absorb the photoelectron energy. It enhances the optical response and improves the optical utilization rate.

  • Open Access

    Near-zero hysteresis in BaTiO 3 -based piezoceramic enabled by non-freezing high-active glassy polar nanoregions

    by Hongbo Li, Yuhan Luan, Rongchuan He, Xudong Luo, Xu Li, Xiaoqiang Song, Qingquan Xiao, Li Zhang, Jiajun Ma, An Xue, et al.

    Near-zero strain hysteresis (Hs) is critical for the performance and reliability of electromechanical devices, yet its realization in environmentally friendly piezoelectric ceramics remains a challenge. Although defect engineering, phase boundary engineering, and the construction of polar nanoregions (PNRs) have been widely explored to reduce strain hysteresis, these individual approaches have yet to achieve significant improvements. Herein, we propose an effective strategy to engineer high-active glassy polar nanoregions (HAG-PNRs) and defect dipoles in Ba(1−x)(Sn0.11Ti0.89)O3–0.5xSb2O3 ceramics with multiphase coexistence. By reducing the domain switching energy barrier and frictional damping in piezoelectric ceramics, an ultralow strain hysteresis (~1.25%) is achieved, representing one of the lowest strain hysteresis values reported in ceramic systems to date. This work offers a novel design paradigm for developing BaTiO3-based lead-free piezoceramics with near-zero strain hysteresis through the controlled formation of HAG-PNRs.

  • The effect of B-site Al doping on ferroelectric in BiFeO3–Ba(SnTi)O3-based lead-free ceramics

    by Yuansheng Ke, Zhaokai Yao, Hong Zeng, Rongshan Zhou, Sha Wu, Qian Yao, Xu Wang, Fangfang Zeng

  • Synergistic Enhancement of Piezoelectric Performance and Strain Temperature Stability in Ce-doped PMN-PT Relaxor Ferroelectrics

    by Jiaxuan Cui, Xi Feng, Peng Peng, Tao Chen, Taiyu Zhou, Tianming Li, Li Zhang, An Xue, Zhanming Dou, Fangping Wang, et al.

  • Open Access

    Study on grain growth kinetics of BaTiO 3 templates for ceramic texturing prepared in different molten salt systems

    by Shengxian Luo, An Xue, Zhiyong Yang, Yang Liao, Fangfang Zeng, Xiaoning Tang, Yang Li, Zhiyao Chu, Qibin Liu

    In this paper, the BaTiO 3 (BT) templates of textured piezoelectric ceramics were prepared by a three-step molten salt method. The relationship between the growth kinetics and the grain size of BT templates constructed under different molten salt conditions, sintering temperature and holding time was explored. The classical Sellars model was employed to study the grain growth dynamics of BT-BaCl 2 (BaCl 2 -KCl molten salt system) and BT-NaCl (NaCl-KCl molten salt system). The activation energy (Q =109715.24 J/mol) and grain growth index (n =9.47) with BT-BaCl 2 are lower than those of BT-NaCl(Q =145156.70 J/mol, n =28.65), its application to BCZT piezoelectric ceramics yields an ultrahigh texture degree of 97.8%, which results in its excellent performance. This study indicated that the BT-BaCl 2 is more effective in promoting grain-oriented growth than the BT-NaCl.

  • Open Access

    The Effect of Doping Modification on the Piezoelectric Properties of Ba1−xCaxZr0.1Ti0.9−ySny Lead-Free Piezoelectric Ceramics

    by Zhiyong Yang, Shengxian Luo, An Xue, Fangfang Zeng, Yang Liao, Yang Li, Zhiyao Chu, Qibin Liu, Huaizhang Gu

    Lead-free piezoelectric ceramics have attracted substantial attention in environmental protection and energy storage applications due to their excellent performance. In this study, the Ba1−xCaxZr0.1Ti0.9−ySnyO3(BCZTS) lead-free piezoelectric ceramic system was synthesized. The effects of doping ratios of Ca and Sn, as well as sintering temperature, were systematically investigated on the phase structure, microstructure, and piezoelectric properties of BCZTS ceramics. The results showed that the Ba0.88Ca0.12Zr0.1Ti0.81Sn0.09 ceramics synthesized with a Ca doping content of x = 12 mol% and a Sn doping content of y = 9 mol % had a homogeneous phase structure with an Orthorhombic–Tetragonal (O-T) morphotropic phase boundary (MPB) and uniform grain size. At a sintering temperature of 1300 °C, the ceramics achieved optimal piezoelectric performance, with a piezoelectric coefficient d33 = 319 pC/N. These lead-free piezoelectric ceramics have superior properties compared to conventional lead-based piezoelectric ceramics in the local market, providing a novel and feasible way to replace lead-based ones in civilian applications.

  • Defect engineering enables low-temperature synthesis of BF-BT piezoceramics with enhanced electric field-induced strain

    by Zhaokai Yao, Huitao Guo, Hong Zeng, Fangping Wang, Qi Sun, Lin Bai, Rongshan Zhou, Qingquan Xiao, Xu Li, Li Zhang, et al.


  • Open Access

    Enhanced Piezoelectric Properties of BF-BST High Curie Temperature Lead-Free Ceramics via Fine Tuning the Composition

    by Jia Li, Huitao Guo, Yuxin Chen, Guifen Fan, Fangfang Zeng

    As the operational demands on piezoelectric devices grow increasingly stringent, there is an urgent need for materials capable of delivering stable performance at elevated temperatures. BiFeO3 (BF), a lead-free piezoelectric oxide with high-temperature resilience, is characterized by its notably high Curie temperature (Tc ∼ 835 °C), rendering it a promising candidate for high-temperature applications. However, its piezoelectric coefficients remain inadequate to satisfy practical requirements. The 0.7BiFeO3-0.3Ba(1-x) SrxTiO3 system (abbreviated as BF-BSxT) was designed to elucidate the roles of chemical disorder and local structural heterogeneities in the enhancement of functional properties through fine-tuning of the Sr content. The phase structure of the samples was carefully examined by X-ray diffraction. Rietveld refinement of the XRD data revealed that all BF-BSxT ceramics consist of coexisting R and PC phases. Optimized compositional disorder and local heterogeneities led to a moderate enhancement in the piezoelectric coefficient d33 value of 160 pC/N, a high Tc of 495 °C, and a remanent polarization Pr ≈ 22.1 μC/cm2 -were achieved in the BF-BSxT system at x = 0.06. These results indicate that BF-BSxT ceramics hold good potential for use in high-temperature piezoelectric devices.

  • Exceptional piezoelectric performance originating from the development of distinct domains under AC electric field

    by Peng Peng, Xi Feng, Tao Chen, Rongshan Zhou, Qingquan Xiao, Li Zhang, Fangfang Zeng

    Piezoelectric performance is closely linked to domain configuration evolution, and domain morphologies are significantly different under alternating current poling (ACP) and direct current poling (DCP). Herein, we investigate the domain evolution of the Pb(Mg1/3Nb2/3)O3-PbTiO3-Sm ceramics under ACP and DCP. ACP-poled samples exhibit a piezoelectric coefficient (d33 ∼ 870 ± 20 pC/N) and dielectric constant (ε33T/ε0 ∼ 6030 ± 100), representing increases of 109% and 115%, respectively, compared to DCP-poled samples. Through ACP, distinct textured domain structures are rapidly formed and stably maintained. Specifically, these domain structures have narrower domain walls and prominent spidery strip-like domains, and these features are observed via scanning electron microscopy and piezoresponse force microscopy. In contrast, DCP samples have interleaved lath-, island-, and stripe-like domains. This direct visualization of ACP-specific domain textures and their correlation to enhanced performance clarifies the critical role of domain evolution. Meanwhile, ACP significantly shortens poling time, offering an efficient strategy for domain engineering and performance optimization of piezoceramics.


  • Open Access

    Negligible-hysteresis piezoceramic achieved by multiphase assisting and domain configuration manipulating

    by Rongchuan He, Huitao Guo, Zhaokai Yao, Fangping Wang, Qi Sun, Xu Li, Xiaoqiang Song, Rongshan Zhou, Qingquan Xiao, Li Zhang, et al.

    High-performance lead-free piezoelectric ceramics with knockdown strain hysteresis are key components in high-precision actuators. However, high strain hysteresis in BaTiO3-based ceramics will induce stability degradation, lifespan reduction, and inferior positioning accuracy. Therefore, in this work, (1-x)Ba(Sn0.11Ti0.89)O3-xSrTiO3-0.6%wt MnO2 composition is elaborately designed to reduce strain hysteresis. And ultra-low strain hysteresis (4.8%) is achieved by adjusting phase structure and domain configuration. TEM results reveal that the composition possesses R-O-T-C four-phase, nano-domains, and active polar nano-regions (PNRs) coexistence, meanwhile, PFM results have unveiled that these active PNRs can speedily respond to applied electric field stimulus. These findings provide a feasible path to prepare the piezoelectric compositions with ultra-low strain hysteresis.