Federica Passeggio
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Federica Passeggio has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Chiara Marzano
Department of Engineering, University of Campania Luigi Vanvitelli, via Roma 29, 81031 Aversa, Italy
3 shared publications - Luigi Zeni
University of Campania Luigi Vanvitelli
3 shared publications - Nunzio Cennamo
University of Campania Luigi Vanvitelli
3 shared publications - Rosalba Pitruzzella
Department of Engineering, University of Campania Luigi Vanvitelli, via Roma 29, 81031 Aversa, Italy
3 shared publications - Francesco Arcadio
University of Campania Luigi Vanvitelli
2 shared publications - Giuseppe Portella
Department of Translational Medical Sciences, University of Naples “Federico II”, 80131 Naples, Italy
2 shared publications
Latest Publications
- Open Access
- 8 July 2026
- Published by MDPI AG in Biosensors
- Vol. 16 (7) , 371
Biosensors Based on Plasmonic Spoon-Shaped Platforms as a Point-of-Care Tool for Escherichia coli Detection
The Enterobacteriaceae family is a significant source of foodborne pathogens and represents a severe threat to human and animal health. These bacteria can penetrate the dairy supply chain through direct contact with cattle and the livestock environment and can survive production processes. Escherichia coli (E. coli), one of the most diffuse bacteria in raw and processed milk, exposes consumers to the risk of contaminated milk. As a result of this exposition, several milk-borne illness outbreaks have been reported worldwide, underscoring the urgent need for effective detection and prevention measures. Conventional analysis methods are effective but have significant limitations, including the requirement of pre-treatment and pre-enrichment steps. Thus, the need for advanced detection techniques that can accurately identify these pathogens without pre-treatment steps is critical. In this work, a proof-of-concept biosensor based on a spoon-shaped optical biochip was developed to detect E. coli via surface plasmon resonance (SPR) phenomena and was combined with a polyclonal antibody layer against E. coli as a molecular recognition element (MRE). The proposed label-free biosensing strategy, achieved by exploiting simple SPR spoon-shaped biochips, exhibits a remarkable detection limit (6.8 colony-forming units, CFU/mL) and high specificity towards other interfering bacteria belonging to the Enterobacteriaceae family. In addition, tests on commercial milk samples were carried out, achieving recovery values of 95% and 102% for whole milk and infant milk, respectively. The proposed spoon-shaped biosensor enables label-free biosensing without the need for microfluidic systems. It provides a rapid response (10 min), paving the way for its use as a point-of-care test (POCT) in real-world settings.
- 8 July 2026
- Published by MDPI AG in Biosensors
- Vol. 16 (7) , 371
Open AccessBiosensors Based on Plasmonic Spoon-Shaped Platforms as a Point-of-Care Tool for Escherichia coli Detection
The Enterobacteriaceae family is a significant source of foodborne pathogens and represents a severe threat to human and animal health. These bacteria can penetrate the dairy supply chain through direct contact with cattle and the livestock environment and can survive production processes. Escherichia coli (E. coli), one of the most diffuse bacteria in raw and processed milk, exposes consumers to the risk of contaminated milk. As a result of this exposition, several milk-borne illness outbreaks have been reported worldwide, underscoring the urgent need for effective detection and prevention measures. Conventional analysis methods are effective but have significant limitations, including the requirement of pre-treatment and pre-enrichment steps. Thus, the need for advanced detection techniques that can accurately identify these pathogens without pre-treatment steps is critical. In this work, a proof-of-concept biosensor based on a spoon-shaped optical biochip was developed to detect E. coli via surface plasmon resonance (SPR) phenomena and was combined with a polyclonal antibody layer against E. coli as a molecular recognition element (MRE). The proposed label-free biosensing strategy, achieved by exploiting simple SPR spoon-shaped biochips, exhibits a remarkable detection limit (6.8 colony-forming units, CFU/mL) and high specificity towards other interfering bacteria belonging to the Enterobacteriaceae family. In addition, tests on commercial milk samples were carried out, achieving recovery values of 95% and 102% for whole milk and infant milk, respectively. The proposed spoon-shaped biosensor enables label-free biosensing without the need for microfluidic systems. It provides a rapid response (10 min), paving the way for its use as a point-of-care test (POCT) in real-world settings.
- Open Access
- 14 May 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (10) , 602
Towards Haemoglobin Detection in Finger-Prick Sampling via Low-Cost Disposable Sensor Chips Based on eMIPs on Plasmonic Optical Fiber Probes
Haemoglobin (Hb) concentration is a key biomarker for several diseases. Traditional laboratory methods often have limitations due to their time-consuming nature, the need for skilled personnel, or the use of high-cost instrumentation. This work presents a sensing strategy for developing new point-of-care tests (POCTs) for Hb detection via a proof of concept. The proposed sensing approach is implemented using plasmonic plastic optical fiber (POF) sensor chips that integrate an electropolymerized molecularly imprinted polymer (eMIP) film on the plasmonic surface for Hb-selective detection. The developed sensor system demonstrates an ultra-low detection limit of 80 fM in buffer, about five orders of magnitude lower than that of other comparable Hb sensors. Selectivity tests against common interfering proteins, such as bovine serum albumin (BSA) and immunoglobulin G (IgG), confirmed high specificity towards the target analyte. Moreover, the sensor’s performance was tested using a whole-blood sample, yielding results consistent with those of standard haematology analysis. The proposed sensor system, based on simple equipment, provides a quick (about 10 min) and cost-effective (about 10 euros per chip) label-free diagnostic tool for POCTs in real-world scenarios, such as finger-prick sampling, offering a less invasive alternative to traditional laboratory methods, towards devices useful for Internet of Medical Things (IoMT).
- 14 May 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (10) , 602
Open AccessTowards Haemoglobin Detection in Finger-Prick Sampling via Low-Cost Disposable Sensor Chips Based on eMIPs on Plasmonic Optical Fiber Probes
Haemoglobin (Hb) concentration is a key biomarker for several diseases. Traditional laboratory methods often have limitations due to their time-consuming nature, the need for skilled personnel, or the use of high-cost instrumentation. This work presents a sensing strategy for developing new point-of-care tests (POCTs) for Hb detection via a proof of concept. The proposed sensing approach is implemented using plasmonic plastic optical fiber (POF) sensor chips that integrate an electropolymerized molecularly imprinted polymer (eMIP) film on the plasmonic surface for Hb-selective detection. The developed sensor system demonstrates an ultra-low detection limit of 80 fM in buffer, about five orders of magnitude lower than that of other comparable Hb sensors. Selectivity tests against common interfering proteins, such as bovine serum albumin (BSA) and immunoglobulin G (IgG), confirmed high specificity towards the target analyte. Moreover, the sensor’s performance was tested using a whole-blood sample, yielding results consistent with those of standard haematology analysis. The proposed sensor system, based on simple equipment, provides a quick (about 10 min) and cost-effective (about 10 euros per chip) label-free diagnostic tool for POCTs in real-world scenarios, such as finger-prick sampling, offering a less invasive alternative to traditional laboratory methods, towards devices useful for Internet of Medical Things (IoMT).
- Open Access
- 3 March 2025
- Published by MDPI AG in Biosensors
- Vol. 15 (3) , 161
Detecting Attomolar Concentrations of Interleukin IL-17A via Pollen-Based Nanoplasmonic Biochips
Interleukins are involved in several diseases and cancers, and their detection and monitoring are of great interest. Their low abundance and short half-lives suggest the need to develop rapid, specific, and highly sensitive detection platforms, easily integrable in point-of-care (POC) systems. Among the other interleukins, interleukin IL-17A is associated with inflammations, neurodegenerative diseases, and cancers, and no biosensors have been previously reported for its detection. In this work, for the detection of IL-17A, a highly sensitive nanoplasmonic sensor based on natural nanostructures like pollen shells, covered by a gold film and a bio-receptor layer, is presented. Hybrid plasmonic modes are exploited to reach high sensitivity without using costly techniques to fabricate periodic nanostructures, such as electron beam lithography. A transparent amino-modified glass substrate is functionalized with carboxylic activated pollen via carbodiimide chemistry. Then, the pollen-based nanostructures are covered by a gold film and derivatized by an immuno-layer specific to IL-17A recognition. The developed IL-17A biosensor is monitored via a simple, small-sized, and low-cost experimental setup, demonstrating high selectivity, a fast response time of about five minutes, and sensitivity with a limit of detection in the ag/mL concentration range. The biosensor allows for the detection of IL-17A in complex solutions thanks to the possibility of high dilution, an advantageous aspect to POC systems.
- 3 March 2025
- Published by MDPI AG in Biosensors
- Vol. 15 (3) , 161
Open AccessDetecting Attomolar Concentrations of Interleukin IL-17A via Pollen-Based Nanoplasmonic Biochips
Interleukins are involved in several diseases and cancers, and their detection and monitoring are of great interest. Their low abundance and short half-lives suggest the need to develop rapid, specific, and highly sensitive detection platforms, easily integrable in point-of-care (POC) systems. Among the other interleukins, interleukin IL-17A is associated with inflammations, neurodegenerative diseases, and cancers, and no biosensors have been previously reported for its detection. In this work, for the detection of IL-17A, a highly sensitive nanoplasmonic sensor based on natural nanostructures like pollen shells, covered by a gold film and a bio-receptor layer, is presented. Hybrid plasmonic modes are exploited to reach high sensitivity without using costly techniques to fabricate periodic nanostructures, such as electron beam lithography. A transparent amino-modified glass substrate is functionalized with carboxylic activated pollen via carbodiimide chemistry. Then, the pollen-based nanostructures are covered by a gold film and derivatized by an immuno-layer specific to IL-17A recognition. The developed IL-17A biosensor is monitored via a simple, small-sized, and low-cost experimental setup, demonstrating high selectivity, a fast response time of about five minutes, and sensitivity with a limit of detection in the ag/mL concentration range. The biosensor allows for the detection of IL-17A in complex solutions thanks to the possibility of high dilution, an advantageous aspect to POC systems.
- 2 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Measurements of Glyphosate at Nanomolar Level via POF-Based Unconventional Sensors
Glyphosate (GLY) contamination is a current problem that requires increasingly high-performance devices capable of detecting ultra-low concentrations of this difficult-to-monitor herbicide. For this reason, this study proposes an optical sensor based on unconventional surface plasmon resonance (SPR) phenomena, capable of detecting GLY concentrations at the nM level, exploiting the binding between the specific sites of a selective molecularly imprinted polymer (MIP) and GLY that occurs into the core of a modified plastic optical fiber (POF). Specifically, the MIP is located in a POF's micro-hole drilled upstream of the SPR region. Therefore, the samples are dropped into the MIP-filled micro-hole, while water is fixed on the SPR surface to excite the plasmonic phenomena. In this way, the interaction between the GLY and the MIP changes the refractive index in the POF core, and so do the SPR conditions downstream. The proposed configuration is based on a simple POF chip connected to a white light source and a spectrometer, obtaining an innovative platform with performances similar to those already present in the literature in terms of detection range, affinity constant (Kaff), and limit of detection (LOD).
- 2 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Measurements of Glyphosate at Nanomolar Level via POF-Based Unconventional Sensors
Glyphosate (GLY) contamination is a current problem that requires increasingly high-performance devices capable of detecting ultra-low concentrations of this difficult-to-monitor herbicide. For this reason, this study proposes an optical sensor based on unconventional surface plasmon resonance (SPR) phenomena, capable of detecting GLY concentrations at the nM level, exploiting the binding between the specific sites of a selective molecularly imprinted polymer (MIP) and GLY that occurs into the core of a modified plastic optical fiber (POF). Specifically, the MIP is located in a POF's micro-hole drilled upstream of the SPR region. Therefore, the samples are dropped into the MIP-filled micro-hole, while water is fixed on the SPR surface to excite the plasmonic phenomena. In this way, the interaction between the GLY and the MIP changes the refractive index in the POF core, and so do the SPR conditions downstream. The proposed configuration is based on a simple POF chip connected to a white light source and a spectrometer, obtaining an innovative platform with performances similar to those already present in the literature in terms of detection range, affinity constant (Kaff), and limit of detection (LOD).