SASophie Viktoria Albrecht

Sophie Viktoria Albrecht

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sophie Viktoria Albrecht has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Comparative Environmental Life Cycle Assessment of Dynamically Wound FRP Reinforcing Bars for Additively Manufactured Concrete Structures

    by Sophie Viktoria Albrecht, Philip Thiele, Dennis Dittmar, Tom Rothe, Christian Hühne, Charlotte Thiel

    Integrating non-corrosive reinforcement offers a transformative opportunity to reduce concrete cover and enable material-efficient additive manufacturing. However, compatible reinforcement strategies remain rare, and their environmental performance is largely unquantified. This study evaluates the environmental impact of basalt- and glass fibre-reinforced polymers produced using a Dynamic Winding Machine for on-site, free-form production in digital construction. Tensile tests yielded short-term tensile strengths of 804 MPa (glass) and 1106 MPa (basalt), which were used in structural beam calculations across ten additive manufacturing concrete mixtures. To ensure comparability, the reinforcement materials and concrete mixtures were assessed on an equal mass and volume basis, while the beam case study was evaluated based on equivalent structural performance. These data informed a cradle-to-gate (A1–A3) Environmental Life Cycle Assessment benchmarking in-house-produced reinforcements against steel and carbon fibre-reinforced polymers. Averaged across the mixtures, the range of Global Warming Potential total indicates that glass and basalt fibre-reinforced polymers achieve 13% and 15% lower greenhouse gas emissions compared to conventional steel, whereas carbon fibre-reinforced polymers exhibit the highest Global Warming Potential total. Ultimately, the results substantiate free-form fibre-reinforced systems, particularly when combined with additive manufacturing and alternative concrete formulations, as a key strategy for advancing sustainable and climate-resilient construction.

  • Open Access

    Comparative Life Cycle Assessment of Manual and Robotic Fabrication of an Unstabilized Rammed Earth Wall

    by Michael Lange, Joschua Gosslar, Sophie Viktoria Albrecht, Hannes Eichler, Charlotte Thiel, Harald Kloft

    Current rammed earth in situ practices face economic challenges that outweigh its ecological advantages, rendering it a niche product in the construction sector. This is mainly due to the inefficient and labor-intensive character of the manual construction processes involved, especially those related to formwork. The introduction of automated and robotic fabrication presents an opportunity to reduce the existing imbalance through digitalization, by shortening the building time and reducing labor input. In this paper, the associated potential environmental impacts of manual and robotic in situ manufacture of unstabilized rammed earth walls are compared and quantified in a life cycle assessment. The results show that robotic in situ manufacture is the more environmentally favorable option within the construction phase, with the highest optimization potential in the building phase. The standard robotic scenario demonstrates significant reductions across a range of environmental impact indicators of approx. 9–97% compared to the standard manual scenario due to a reduction of waste and formwork. Specifically, the GWP100-total is reduced by 28% and EE by 68%. Further key factor optimizations—including minimizing transport distances, using locally sourced loam, reducing packaging materials, and utilizing renewable energy—show even greater benefits. In the robotic procedure, this result in reductions in GWP100-total of 76% and EE of 70% compared to its robotic standard scenario, and to reductions of 83% and 90%, respectively, compared to the standard manual procedure.

  • Open Access

    Decoding concrete’s environmental performance: A detailed analysis of global EPDs across the entire life cycle

    by Sophie Viktoria Albrecht, Merve Karamara, Charlotte Thiel

    Environmental Product Declarations (EPDs) for concrete are essential tools to quantify the environmental impact of this versatile building material throughout its life cycle, supporting sustainable choices in construction. Concrete is made up of raw materials like cement, water, aggregates, additives, and admixtures, which can be mixed in diverse ways. This variability often necessitates site-specific EPDs, as emissions and environmental impacts depend greatly on cement type, transport routes, and specific production processes. This study analyses various data sources, focusing on EPDs according to ISO 14025 and EN 15804. The life cycle phases A1-A3, B1-B7, C1-C4 and D are considered and compared. The results demonstrate that factors such as scenario assumptions, methodological choices, and allocation procedures significantly influence concrete’s environmental impact. Transparent EPDs improve assessment reliability, while allocation methods, especially in phases D and end-of-life, significantly influence reported benefits, underscoring the importance of careful allocation for accurate impact evaluations. Improved standardisation, transparency, and alignment with EN 16757 would enhance EPD comparability and reliability. Overall, the study identifies key parameters such as recycling potential, production stage and allocation methods as substantial factors in the environmental performance of concrete.


  • Open Access

    Strategies for Minimizing Environmental Impact in Construction: A Case Study of a Cementitious 3D Printed Lost Formwork for a Staircase

    by Sophie Viktoria Albrecht, Stefan Hellerbrand, Florian Weininger, Charlotte Thiel

    The construction industry faces significant challenges, including environmental sustainability, rising material costs, and a shortage of skilled labor. Digital fabrication technologies offer innovative solutions to address these issues by reducing raw material consumption and waste generation. Among these, 3D printing technologies offer distinct advantages over traditional construction methods, particularly in handling complex geometries. However, the significant environmental impact of cement in 3D printed concrete, due to its high rheological and printability requirements, remains a concern. This study introduces a novel application of 3D printed permanent formwork in the construction of a winder staircase, assessed through an Environmental Life Cycle Assessment (LCA) from cradle to gate. By comparing the environmental impacts of various construction materials and processes, this study highlights the comparative advantages and disadvantages of conventional methods versus 3D printing. The LCA results reveal that traditional production methods, particularly those using plywood formwork, exhibit higher environmental impacts. In contrast, timber formwork performs better than most 3D printed mixtures in terms of Global Warming Potential (GWP), Acidification Potential (AP), and abiotic depletion potential (ADP). The findings of this study underscore the potential of additive manufacturing for sustainable construction, particularly through the use of low-clinker cement in 3D printed formwork, offering a promising pathway towards reducing the environmental footprint of construction activities.