Shijian Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shijian Wang has a total of 175 co-authors. Here are the top co-authors by number of shared publications:
- Guoxiu Wang
Centre for Clean Energy Technology University of Technology Sydney Sydney New South Wales Australia
21 shared publications Dongfang Li
Centre for Clean Energy Technology School of Mathematical and Physical Sciences Faculty of Science University of Technology Sydney Sydney New South Wales 2007 Australia
6 shared publicationsRui Zang
6 shared publications- Hao Liu
Centre for Clean Energy Technology University of Technology Sydney Sydney NSW Australia
5 shared publications Pengxin Li
5 shared publicationsXin Guo
Faculty of Materials Science and Energy Engineering Shenzhen University of Advanced Technology Shenzhen Guangdong 518055 China
5 shared publications
Latest Publications
- Open Access
Foam‐Carbon Surface Reconstruction for Fast and Durable Sodium Storage in Lignite‐Derived Hard Carbon
Developing low‐cost hard carbon anodes that simultaneously achieve high initial Coulombic efficiency, rapid sodium‐storage kinetics, and long‐term durability remains a major challenge for the practical application of sodium–ion batteries. Herein, inspired by hierarchical porous architectures, we report a starch‐derived carbon foam coating strategy to reconstruct the surface of lignite‐derived hard carbon. The ultrathin carbon foam layer provides interconnected Na + transport channels, accessible storage sites, and enriched oxygen‐containing surface species. Easter‐associated interfacial coupling promotes carbon‐layer rearrangement and closed‐pore development during carbonization, thereby integrating rapid Na + transport with enhanced sodium storage. As a result, the optimized hard carbon delivers a reversible capacity of 401.4 mAh g −1 , a high initial Coulombic efficiency of 91.7%, and outstanding cycling stability, retaining 75.8% of its capacity after 15 000 cycles. Comprehensive electrochemical analyses and density functional theory calculations reveal that the reconstructed architecture lowers sodium‐ion diffusion barriers and promotes synergistic adsorption, interlayer insertion, and nanopore filling. A full sodium–ion battery assembled with Na 3 V 2 (PO 4 ) 3 further demonstrates the practical feasibility of the reconstructed hard carbon anode. This work establishes foam‐carbon surface reconstruction as an effective interface‐engineering strategy for activating low‐rank coal toward practical hard carbon anodes and provides a general pathway for sustainable carbon materials in next‐generation SIBs.
Open AccessFoam‐Carbon Surface Reconstruction for Fast and Durable Sodium Storage in Lignite‐Derived Hard Carbon
Developing low‐cost hard carbon anodes that simultaneously achieve high initial Coulombic efficiency, rapid sodium‐storage kinetics, and long‐term durability remains a major challenge for the practical application of sodium–ion batteries. Herein, inspired by hierarchical porous architectures, we report a starch‐derived carbon foam coating strategy to reconstruct the surface of lignite‐derived hard carbon. The ultrathin carbon foam layer provides interconnected Na + transport channels, accessible storage sites, and enriched oxygen‐containing surface species. Easter‐associated interfacial coupling promotes carbon‐layer rearrangement and closed‐pore development during carbonization, thereby integrating rapid Na + transport with enhanced sodium storage. As a result, the optimized hard carbon delivers a reversible capacity of 401.4 mAh g −1 , a high initial Coulombic efficiency of 91.7%, and outstanding cycling stability, retaining 75.8% of its capacity after 15 000 cycles. Comprehensive electrochemical analyses and density functional theory calculations reveal that the reconstructed architecture lowers sodium‐ion diffusion barriers and promotes synergistic adsorption, interlayer insertion, and nanopore filling. A full sodium–ion battery assembled with Na 3 V 2 (PO 4 ) 3 further demonstrates the practical feasibility of the reconstructed hard carbon anode. This work establishes foam‐carbon surface reconstruction as an effective interface‐engineering strategy for activating low‐rank coal toward practical hard carbon anodes and provides a general pathway for sustainable carbon materials in next‐generation SIBs.
- Open Access
- 14 October 2026
- Published by Wiley in Advanced Functional Materials
- p. e79049
Fluorocarbon Surfactant‐Derived Ultrathin Porous Carbon Interface Layer for Stable Zn Anode
Aqueous zinc‐ion batteries are promising for large‐scale energy storage, yet their practical deployment is severely hindered by parasitic hydrogen evolution, dendritic growth, and low Zn utilization. Here, we report an ultrathin (∼5.5 nm) fluorine/oxygen co‐doped porous carbon interface layer constructed on Cu foil via controlled pyrolysis of a fluorocarbon surfactant precursor. This nanoscale interface confines Zn deposition behavior at the Cu interface region, effectively regulating nucleation and growth. The F/O dopants induce localized electronic modulation and hydrophobicity to suppress water‐induced side reactions, while the porous framework facilitates rapid Zn 2+ migration and accelerates the desolvation kinetics. As a result, Zn preferentially deposits beneath the interface layer, leading to dense and uniform metal growth with minimal dead Zn formation. Benefiting from this interfacial confinement effect, the optimized electrode, with a low Zn loading of 5 mAh cm −2 , delivers exceptional reversibility and cycling stability (>1500 cycles at 5 mA cm −2 with 40% depth of discharge). When paired with a MnO 2 cathode, the full cell achieves 88.2% capacity retention after 800 cycles at 1 A g −1 . This work highlights a scalable strategy to engineer ultrathin functional interfaces on current collectors and provides new insights into regulating metal deposition via interfacial confinement for high‐efficiency metal‐based batteries.
- 14 October 2026
- Published by Wiley in Advanced Functional Materials
- p. e79049
Open AccessFluorocarbon Surfactant‐Derived Ultrathin Porous Carbon Interface Layer for Stable Zn Anode
Aqueous zinc‐ion batteries are promising for large‐scale energy storage, yet their practical deployment is severely hindered by parasitic hydrogen evolution, dendritic growth, and low Zn utilization. Here, we report an ultrathin (∼5.5 nm) fluorine/oxygen co‐doped porous carbon interface layer constructed on Cu foil via controlled pyrolysis of a fluorocarbon surfactant precursor. This nanoscale interface confines Zn deposition behavior at the Cu interface region, effectively regulating nucleation and growth. The F/O dopants induce localized electronic modulation and hydrophobicity to suppress water‐induced side reactions, while the porous framework facilitates rapid Zn 2+ migration and accelerates the desolvation kinetics. As a result, Zn preferentially deposits beneath the interface layer, leading to dense and uniform metal growth with minimal dead Zn formation. Benefiting from this interfacial confinement effect, the optimized electrode, with a low Zn loading of 5 mAh cm −2 , delivers exceptional reversibility and cycling stability (>1500 cycles at 5 mA cm −2 with 40% depth of discharge). When paired with a MnO 2 cathode, the full cell achieves 88.2% capacity retention after 800 cycles at 1 A g −1 . This work highlights a scalable strategy to engineer ultrathin functional interfaces on current collectors and provides new insights into regulating metal deposition via interfacial confinement for high‐efficiency metal‐based batteries.
- Open Access
- 2 October 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Cationic chain-anchored monolayer enables wide-temperature composite polymer electrolytes for lithium-metal batteries
Ionic transport pathways critically influence the stability, capacity, and safety of solid-state lithium-metal batteries. However, realizing efficient ionic conduction that couples fast ion transport kinetics with interfacial stability remains a formidable challenge in solid-state lithium-metal batteries under wide-temperature conditions. Here, we report a cationic chain-anchored monolayer strategy for engineering stable ion transport pathways within poly(vinylidene fluoride-co-hexafluoropropylene)/garnet-based composite polymer electrolytes. The dynamic evolution is investigated using synchrotron infrared spectroscopy, two-dimensional solid-state nuclear magnetic resonance spectroscopy, and additional operando measurements. We demonstrate that an in-situ formed single-ion-like conducting cationic chain-anchored monolayer, featuring solvent-phobic chain-tethered cationic channels, establishes robust and efficient ion transport pathways in the composite electrolyte interface. The resultant electrolytes deliver a low activation energy (0.092 eV) and high Li+ transference number (0.78), enabling 400 cycles at 120 °C (Li||LiFePO4, >99% capacity retention) and 450 cycles at −25 °C (4.5 V Li||LiNi0.8Co0.1Mn0.1O2, 82.5% capacity retention). Our work offers an effective strategy towards quasi-solid/solid-state lithium-metal batteries with stable long-term cycling across a wide-temperature range.
- 2 October 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessCationic chain-anchored monolayer enables wide-temperature composite polymer electrolytes for lithium-metal batteries
Ionic transport pathways critically influence the stability, capacity, and safety of solid-state lithium-metal batteries. However, realizing efficient ionic conduction that couples fast ion transport kinetics with interfacial stability remains a formidable challenge in solid-state lithium-metal batteries under wide-temperature conditions. Here, we report a cationic chain-anchored monolayer strategy for engineering stable ion transport pathways within poly(vinylidene fluoride-co-hexafluoropropylene)/garnet-based composite polymer electrolytes. The dynamic evolution is investigated using synchrotron infrared spectroscopy, two-dimensional solid-state nuclear magnetic resonance spectroscopy, and additional operando measurements. We demonstrate that an in-situ formed single-ion-like conducting cationic chain-anchored monolayer, featuring solvent-phobic chain-tethered cationic channels, establishes robust and efficient ion transport pathways in the composite electrolyte interface. The resultant electrolytes deliver a low activation energy (0.092 eV) and high Li+ transference number (0.78), enabling 400 cycles at 120 °C (Li||LiFePO4, >99% capacity retention) and 450 cycles at −25 °C (4.5 V Li||LiNi0.8Co0.1Mn0.1O2, 82.5% capacity retention). Our work offers an effective strategy towards quasi-solid/solid-state lithium-metal batteries with stable long-term cycling across a wide-temperature range.
- 19 September 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 696
Weakening conjugation of organic cyclic additives towards advanced aqueous zinc-ion batteries
- 19 September 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 696
Weakening conjugation of organic cyclic additives towards advanced aqueous zinc-ion batteries
- Open Access
- 23 August 2026
- Published by Wiley in Advanced Intelligent Discovery
- p. e70153
Data‐Efficient Cycle‐Level Capacity Prediction Using 1D Deep Convolutional Network
Fundamental battery research is constrained by the time‐consuming process of long‐term charge–discharge cycling stability testing. Here, we introduce DeepBat, a deep learning framework designed to shorten cycling tests by achieving accurate, long‐horizon prediction of cycle‐level capacities under limited data conditions. Unlike conventional lifetime forecasting models requiring extensive datasets, DeepBat leverages cross‐formulation learning to deliver high‐accuracy, cycle‐by‐cycle specific capacity predictions over extended cycling horizons using only sparse early‐cycle input data. Validated on a custom‐built library of microstructurally diverse organic electrodes encompassing 0D, 1D, and 2D carbon additives, the model achieved 98.8% mean prediction accuracy across 500 unseen cycles, demonstrating the potential to shorten experimental duration by 50% while maintaining high predictive fidelity. DeepBat outperforms traditional machine learning baselines and general‐purpose large language models, exhibiting superior robustness against data noise. SHapley Additive exPlanations‐based interpretability analysis confirms that DeepBat captures specific capacity evolution trends by assigning physically consistent importance to carbon additive dimensionality, loading, and cycle number. This work establishes DeepBat as a robust, interpretable tool for high‐accuracy, cycle‐level specific capacity predictions over extended cycling intervals, enabling model predictions to replace 50%–75% of long‐term cycling data required for material screening while maintaining reliable degradation assessment, thereby accelerating fundamental research on battery‐material technologies.
- 23 August 2026
- Published by Wiley in Advanced Intelligent Discovery
- p. e70153
Open AccessData‐Efficient Cycle‐Level Capacity Prediction Using 1D Deep Convolutional Network
Fundamental battery research is constrained by the time‐consuming process of long‐term charge–discharge cycling stability testing. Here, we introduce DeepBat, a deep learning framework designed to shorten cycling tests by achieving accurate, long‐horizon prediction of cycle‐level capacities under limited data conditions. Unlike conventional lifetime forecasting models requiring extensive datasets, DeepBat leverages cross‐formulation learning to deliver high‐accuracy, cycle‐by‐cycle specific capacity predictions over extended cycling horizons using only sparse early‐cycle input data. Validated on a custom‐built library of microstructurally diverse organic electrodes encompassing 0D, 1D, and 2D carbon additives, the model achieved 98.8% mean prediction accuracy across 500 unseen cycles, demonstrating the potential to shorten experimental duration by 50% while maintaining high predictive fidelity. DeepBat outperforms traditional machine learning baselines and general‐purpose large language models, exhibiting superior robustness against data noise. SHapley Additive exPlanations‐based interpretability analysis confirms that DeepBat captures specific capacity evolution trends by assigning physically consistent importance to carbon additive dimensionality, loading, and cycle number. This work establishes DeepBat as a robust, interpretable tool for high‐accuracy, cycle‐level specific capacity predictions over extended cycling intervals, enabling model predictions to replace 50%–75% of long‐term cycling data required for material screening while maintaining reliable degradation assessment, thereby accelerating fundamental research on battery‐material technologies.
- Open Access
- 14 July 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (47) , e74057
Bio‐Inspired Dual‐Gradient Aerogel Enables Sustainable Freshwater Production and Energy Harvesting
Solar‐driven interfacial evaporation and moisture‐electricity generation offer promising routes to sustainable freshwater and energy production, yet their integration into a single water and electricity co‐production system (WECPS) has remained largely unrealized. Here, we rationally design a dual‐gradient aerogel (DGA) with engineered ion and water gradients that enables long‐term salt‐resistant solar evaporation alongside high‐performance moisture‐electricity generation. The ion gradient, created through asymmetric ion doping with two surfactants, drives directional ion diffusion to enhance electrical output, while the water gradient, arising from hydrophilicity differences and asymmetric porosity, sustains continuous water and ion transport and induces the Marangoni effect for uninterrupted evaporation. As a result, the DGA‐based WECPS delivers power densities up to 324‐fold higher than homogeneous aerogels and maintains stable solar evaporation for seven days in saline environments. An outdoor DGA‐array WECPS further demonstrates simultaneous freshwater production and energy harvesting under real conditions. These findings establish a practical pathway toward efficient, self‐sustaining water–energy co‐production technologies.
- 14 July 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (47) , e74057
Open AccessBio‐Inspired Dual‐Gradient Aerogel Enables Sustainable Freshwater Production and Energy Harvesting
Solar‐driven interfacial evaporation and moisture‐electricity generation offer promising routes to sustainable freshwater and energy production, yet their integration into a single water and electricity co‐production system (WECPS) has remained largely unrealized. Here, we rationally design a dual‐gradient aerogel (DGA) with engineered ion and water gradients that enables long‐term salt‐resistant solar evaporation alongside high‐performance moisture‐electricity generation. The ion gradient, created through asymmetric ion doping with two surfactants, drives directional ion diffusion to enhance electrical output, while the water gradient, arising from hydrophilicity differences and asymmetric porosity, sustains continuous water and ion transport and induces the Marangoni effect for uninterrupted evaporation. As a result, the DGA‐based WECPS delivers power densities up to 324‐fold higher than homogeneous aerogels and maintains stable solar evaporation for seven days in saline environments. An outdoor DGA‐array WECPS further demonstrates simultaneous freshwater production and energy harvesting under real conditions. These findings establish a practical pathway toward efficient, self‐sustaining water–energy co‐production technologies.
- 12 February 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (7) , 6186-6199
Lattice Reordering from High-Valence Mo Segregation for High-Nickel Cobalt-Free Cathodes
High-nickel cobalt-free cathodes are deemed promising candidates for next-generation lithium-ion batteries owing to their superior energy density, cost-effectiveness, and environmental benignity. However, their practical implementation is hindered by inherent structural instability and rapid capacity degradation. Herein, we develop a Mo/F cation-anion modified single-crystalline LiNi0.8Mn0.2O2 cathode material (SC-MFNM) via a designed facile high-temperature solid-state synthesis route. During high-temperature calcination, the lattice strain induced by structural transition promotes the outward migration of Mo6+ ions from the Ni-rich core to the surface region, leading to lattice reorganization and expansion of surface interplanar spacing. The resultant lattice gradient facilitates rapid ion transport from the electrolyte through the expanded surface lattice, while the compact inner lattice enables ordered ion insertion. Consequently, this structure effectively mitigates irreversible phase transitions and stabilizes the layered framework by suppressing cation mixing, while simultaneously preserving the high specific capacity to the Ni-rich layer core, offering an approach to improve the structural and electrochemical stability of the Ni-rich cathode. Benefiting from the structural merits, the SC-MFNM cathode exhibits exceptional cycling stability, delivering a reversible capacity of 164.9 mAh g-1 after 300 cycles at 1.0 C compared with the lower capacity of 51.5 mAh g-1 from the polycrystalline cathode. This work demonstrates the importance of lattice regulation and structural evolution in improving the structural and electrochemical stability of high-nickel cobalt-free cathodes, contributing significantly to the development of high-energy-density lithium-ion batteries with long-term cycling durability.
- 12 February 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (7) , 6186-6199
Lattice Reordering from High-Valence Mo Segregation for High-Nickel Cobalt-Free Cathodes
High-nickel cobalt-free cathodes are deemed promising candidates for next-generation lithium-ion batteries owing to their superior energy density, cost-effectiveness, and environmental benignity. However, their practical implementation is hindered by inherent structural instability and rapid capacity degradation. Herein, we develop a Mo/F cation-anion modified single-crystalline LiNi0.8Mn0.2O2 cathode material (SC-MFNM) via a designed facile high-temperature solid-state synthesis route. During high-temperature calcination, the lattice strain induced by structural transition promotes the outward migration of Mo6+ ions from the Ni-rich core to the surface region, leading to lattice reorganization and expansion of surface interplanar spacing. The resultant lattice gradient facilitates rapid ion transport from the electrolyte through the expanded surface lattice, while the compact inner lattice enables ordered ion insertion. Consequently, this structure effectively mitigates irreversible phase transitions and stabilizes the layered framework by suppressing cation mixing, while simultaneously preserving the high specific capacity to the Ni-rich layer core, offering an approach to improve the structural and electrochemical stability of the Ni-rich cathode. Benefiting from the structural merits, the SC-MFNM cathode exhibits exceptional cycling stability, delivering a reversible capacity of 164.9 mAh g-1 after 300 cycles at 1.0 C compared with the lower capacity of 51.5 mAh g-1 from the polycrystalline cathode. This work demonstrates the importance of lattice regulation and structural evolution in improving the structural and electrochemical stability of high-nickel cobalt-free cathodes, contributing significantly to the development of high-energy-density lithium-ion batteries with long-term cycling durability.
- Open Access
- 19 January 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (9)
Toward Industrial Electrosynthesis of Ethylene: Energy‐Efficient and Stable Acetylene Semi‐Hydrogenation on a Copper Phosphide/MXene Electrocatalyst
Electrocatalytic semi‐hydrogenation of acetylene to ethylene (EHAE) using renewable electricity represents a promising alternative approach for ethylene production. However, its relatively low energy efficiency (EE) and insufficient electrocatalyst stability hinder its industrial applications. The conduct a techno‐economic analysis indicates that the EHAE process becomes profitable when the EE exceeds 22.8% at an industrial current density of 0.2 A cm −2 . Herein, we report a novel electrocatalyst featuring firmly immobilized copper phosphide (Cu 3 P) nanoparticles on MXene nanosheets (Ti 3 C 2 /Cu 3 P) for a stable EHAE process at industrial currents using membrane electrode assembly (MEA) system. Specifically, the Ti 3 C 2 /Cu 3 P electrocatalyst achieves an EE of 23.0% at 0.2 A cm −2 , demonstrating its potential for practical application and economic viability. The strong interactions between Cu 3 P and Ti 3 C 2 MXene prevent the agglomeration and dissolution of Cu 3 P nanoparticles during long‐term EHAE process. Notably, in a 4 cm 2 MEA, Ti 3 C 2 /Cu 3 P catalysts can sustain high performance for 100 h at 1.0 A with an ethylene Faradaic efficiency decay of only 0.051% per hour. Quasi in situ electron paramagnetic resonance spectroscopy and theoretical calculations indicate that Ti 3 C 2 /Cu 3 P facilitates water dissociation and synergistically enhances the adsorption of acetylene and active hydrogen (H * ), thereby accelerating the kinetics of EHAE process.
- 19 January 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (9)
Open AccessToward Industrial Electrosynthesis of Ethylene: Energy‐Efficient and Stable Acetylene Semi‐Hydrogenation on a Copper Phosphide/MXene Electrocatalyst
Electrocatalytic semi‐hydrogenation of acetylene to ethylene (EHAE) using renewable electricity represents a promising alternative approach for ethylene production. However, its relatively low energy efficiency (EE) and insufficient electrocatalyst stability hinder its industrial applications. The conduct a techno‐economic analysis indicates that the EHAE process becomes profitable when the EE exceeds 22.8% at an industrial current density of 0.2 A cm −2 . Herein, we report a novel electrocatalyst featuring firmly immobilized copper phosphide (Cu 3 P) nanoparticles on MXene nanosheets (Ti 3 C 2 /Cu 3 P) for a stable EHAE process at industrial currents using membrane electrode assembly (MEA) system. Specifically, the Ti 3 C 2 /Cu 3 P electrocatalyst achieves an EE of 23.0% at 0.2 A cm −2 , demonstrating its potential for practical application and economic viability. The strong interactions between Cu 3 P and Ti 3 C 2 MXene prevent the agglomeration and dissolution of Cu 3 P nanoparticles during long‐term EHAE process. Notably, in a 4 cm 2 MEA, Ti 3 C 2 /Cu 3 P catalysts can sustain high performance for 100 h at 1.0 A with an ethylene Faradaic efficiency decay of only 0.051% per hour. Quasi in situ electron paramagnetic resonance spectroscopy and theoretical calculations indicate that Ti 3 C 2 /Cu 3 P facilitates water dissociation and synergistically enhances the adsorption of acetylene and active hydrogen (H * ), thereby accelerating the kinetics of EHAE process.
- Open Access
- 19 January 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (9) , e18909
Toward Industrial Electrosynthesis of Ethylene: Energy‐Efficient and Stable Acetylene Semi‐Hydrogenation on a Copper Phosphide/MXene Electrocatalyst
Electrocatalytic semi‐hydrogenation of acetylene to ethylene (EHAE) using renewable electricity represents a promising alternative approach for ethylene production. However, its relatively low energy efficiency (EE) and insufficient electrocatalyst stability hinder its industrial applications. The conduct a techno‐economic analysis indicates that the EHAE process becomes profitable when the EE exceeds 22.8% at an industrial current density of 0.2 A cm −2 . Herein, we report a novel electrocatalyst featuring firmly immobilized copper phosphide (Cu 3 P) nanoparticles on MXene nanosheets (Ti 3 C 2 /Cu 3 P) for a stable EHAE process at industrial currents using membrane electrode assembly (MEA) system. Specifically, the Ti 3 C 2 /Cu 3 P electrocatalyst achieves an EE of 23.0% at 0.2 A cm −2 , demonstrating its potential for practical application and economic viability. The strong interactions between Cu 3 P and Ti 3 C 2 MXene prevent the agglomeration and dissolution of Cu 3 P nanoparticles during long‐term EHAE process. Notably, in a 4 cm 2 MEA, Ti 3 C 2 /Cu 3 P catalysts can sustain high performance for 100 h at 1.0 A with an ethylene Faradaic efficiency decay of only 0.051% per hour. Quasi in situ electron paramagnetic resonance spectroscopy and theoretical calculations indicate that Ti 3 C 2 /Cu 3 P facilitates water dissociation and synergistically enhances the adsorption of acetylene and active hydrogen (H * ), thereby accelerating the kinetics of EHAE process.
- 19 January 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (9) , e18909
Open AccessToward Industrial Electrosynthesis of Ethylene: Energy‐Efficient and Stable Acetylene Semi‐Hydrogenation on a Copper Phosphide/MXene Electrocatalyst
Electrocatalytic semi‐hydrogenation of acetylene to ethylene (EHAE) using renewable electricity represents a promising alternative approach for ethylene production. However, its relatively low energy efficiency (EE) and insufficient electrocatalyst stability hinder its industrial applications. The conduct a techno‐economic analysis indicates that the EHAE process becomes profitable when the EE exceeds 22.8% at an industrial current density of 0.2 A cm −2 . Herein, we report a novel electrocatalyst featuring firmly immobilized copper phosphide (Cu 3 P) nanoparticles on MXene nanosheets (Ti 3 C 2 /Cu 3 P) for a stable EHAE process at industrial currents using membrane electrode assembly (MEA) system. Specifically, the Ti 3 C 2 /Cu 3 P electrocatalyst achieves an EE of 23.0% at 0.2 A cm −2 , demonstrating its potential for practical application and economic viability. The strong interactions between Cu 3 P and Ti 3 C 2 MXene prevent the agglomeration and dissolution of Cu 3 P nanoparticles during long‐term EHAE process. Notably, in a 4 cm 2 MEA, Ti 3 C 2 /Cu 3 P catalysts can sustain high performance for 100 h at 1.0 A with an ethylene Faradaic efficiency decay of only 0.051% per hour. Quasi in situ electron paramagnetic resonance spectroscopy and theoretical calculations indicate that Ti 3 C 2 /Cu 3 P facilitates water dissociation and synergistically enhances the adsorption of acetylene and active hydrogen (H * ), thereby accelerating the kinetics of EHAE process.
- 11 December 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (51) , 47663-47674
Covalent Bridges Enabling Layered C 60 as an Exceptionally Stable Anode in Lithium-Ion Batteries
Fullerene (C60) exhibits rich redox chemistry but suffers from severe dissolution of reduced fulleride species in carbonate electrolytes, leading to poor reversibility and rapid capacity fading. Here, we demonstrate covalent bridging as a general strategy to stabilize the fullerene framework using Mg4C60. Mg atoms promote intercage covalent connections through C-C single bonds and [2 + 2] cycloaddition bonds, transforming a van der Waals molecular solid into a layered polymeric framework. Comprehensive characterizations reveal that such bridging effectively suppresses dissolution, preserves structural integrity, and enables a reversible Li+ storage process. Interestingly, unlike pristine C60 that undergoes multiple phase transitions, Mg4C60 exhibits slope-type electrochemical profiles reminiscent of soft carbon yet originates from an ordered two-dimensional framework. Comprehensive mechanistic studies reveal reversible fullerene cage distortions accompanied by the dynamic reconstruction of sp2 electronic states, while the covalently bridged scaffold remains intact. This work establishes covalently bridged fullerenes as a new class of durable carbonaceous anodes and provides a general pathway for designing ordered carbon frameworks with enhanced stability for next-generation rechargeable batteries.
- 11 December 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (51) , 47663-47674
Covalent Bridges Enabling Layered C 60 as an Exceptionally Stable Anode in Lithium-Ion Batteries
Fullerene (C60) exhibits rich redox chemistry but suffers from severe dissolution of reduced fulleride species in carbonate electrolytes, leading to poor reversibility and rapid capacity fading. Here, we demonstrate covalent bridging as a general strategy to stabilize the fullerene framework using Mg4C60. Mg atoms promote intercage covalent connections through C-C single bonds and [2 + 2] cycloaddition bonds, transforming a van der Waals molecular solid into a layered polymeric framework. Comprehensive characterizations reveal that such bridging effectively suppresses dissolution, preserves structural integrity, and enables a reversible Li+ storage process. Interestingly, unlike pristine C60 that undergoes multiple phase transitions, Mg4C60 exhibits slope-type electrochemical profiles reminiscent of soft carbon yet originates from an ordered two-dimensional framework. Comprehensive mechanistic studies reveal reversible fullerene cage distortions accompanied by the dynamic reconstruction of sp2 electronic states, while the covalently bridged scaffold remains intact. This work establishes covalently bridged fullerenes as a new class of durable carbonaceous anodes and provides a general pathway for designing ordered carbon frameworks with enhanced stability for next-generation rechargeable batteries.