Zhentao Ding
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zhentao Ding has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Zigang Deng
Southwest Jiaotong University
8 shared publications - Chong Lv
State Key Laboratory of Rail Transit Vehicle System, Southwest Jiaotong University, Chengdu, China
4 shared publications Haitao Li
Research Center for Super-High-Speed Evacuated Tube Maglev Transport, Southwest Jiaotong University, Chengdu 610031, People’s Republic of China
3 shared publicationsGino D’oVidio
Civil, Construction-Architectural and Environmental Engineering Department, University of L’Aquila, L’Aquila 61700, Italy
2 shared publications- Maoru Chi
Southwest Jiaotong University
2 shared publications Yuxuan Lu
Southwest Jiao tong University
2 shared publications
Latest Publications
- 1 October 2026
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 39 (10) , 105009
Motion modes and boundary evolution of electromagnetically compensated high-temperature superconducting maglev system
High-temperature superconducting (HTS) maglev trains have promising applications in high-speed transportation. Nevertheless, high-frequency alternating magnetic fields generated by the permanent magnet guideway will degrade the levitation force of HTS bulks. Such attenuation severely endangers the operational safety of maglev trains; therefore, an electromagnetic compensation subsystem (EMCS) is required. To improve the operational reliability of the HTS-EMCS, its motion modes and boundary evolution laws need to be clarified. Firstly, a vertical dynamic model was constructed based on experimental data of levitation force. Secondly, four levitation modes were defined: stable state, hybrid state, critical state, and unstable state. The boundary evolution was verified and analyzed using Lyapunov’s theorem and the energy function. Subsequently, the influence of initial conditions and current excitation on the boundary was analyzed. Finally, the results were validated through vertical vibration experiments under continuous wavelet transform, and the transformation of energy in the time-frequency domain was analyzed. The results indicate that the transition between states is triggered by an increase in current excitation. In practical applications, it is necessary to prevent the system from entering the critical state, completely avoid unstable states, and maintain the initial vertical offset below 0.001 m. In addition, increasing current excitation can compensate for the stiffness asymmetry of the original system. This research provides a reference for the design of EMCS and the safe and stable high-speed operation of HTS maglev trains.
- 1 October 2026
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 39 (10) , 105009
Motion modes and boundary evolution of electromagnetically compensated high-temperature superconducting maglev system
High-temperature superconducting (HTS) maglev trains have promising applications in high-speed transportation. Nevertheless, high-frequency alternating magnetic fields generated by the permanent magnet guideway will degrade the levitation force of HTS bulks. Such attenuation severely endangers the operational safety of maglev trains; therefore, an electromagnetic compensation subsystem (EMCS) is required. To improve the operational reliability of the HTS-EMCS, its motion modes and boundary evolution laws need to be clarified. Firstly, a vertical dynamic model was constructed based on experimental data of levitation force. Secondly, four levitation modes were defined: stable state, hybrid state, critical state, and unstable state. The boundary evolution was verified and analyzed using Lyapunov’s theorem and the energy function. Subsequently, the influence of initial conditions and current excitation on the boundary was analyzed. Finally, the results were validated through vertical vibration experiments under continuous wavelet transform, and the transformation of energy in the time-frequency domain was analyzed. The results indicate that the transition between states is triggered by an increase in current excitation. In practical applications, it is necessary to prevent the system from entering the critical state, completely avoid unstable states, and maintain the initial vertical offset below 0.001 m. In addition, increasing current excitation can compensate for the stiffness asymmetry of the original system. This research provides a reference for the design of EMCS and the safe and stable high-speed operation of HTS maglev trains.
- 17 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. PP, 1
Design and Analysis of a Novel In-Wheel Machine-Based Powertrain for HTS Maglev Systems
High-temperature superconducting (HTS) maglev systems, as promising transportation solutions, have garnered growing attention in maglev transportation due to their inherent passive self-stability. To leverage this advantage, this paper pro-poses a compact propulsion system featuring a contactless power-train with a permanent magnet electrodynamic in-wheel motor (PMEIM). First, analytical modelling is employed to characterize the external magnetic field of the PMEIM, and its characteristics under multiple operating conditions are derived via coordinate transformation. Subsequently, the eddy current model of the secondary conductor plate is established, and its reflected mag-netic field is solved. Based on this, the electromagnetic force model of the PMEIM powertrain is developed in accordance with the magnetic charge theory, and the corresponding mechanical characteristics are determined. Next, the PMEIM design is con-ducted, with its load characteristics and transient response eval-uated by electromagnetic analysis and co-simulation. Finally, a small-scale prototype is fabricated and tested. Results indicate that theoretical predictions are in close agreement with the ex-perimental measurements, with the measured propulsion and guidance forces being 12.70 N and 41.14 N, respectively, under rated operating conditions. The integrated PMEIM configuration enables contactless force and torque transmission, demonstrating potential as a compact, flexible, and cost-effective propulsion solution for HTS maglev systems.
- 17 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. PP, 1
Design and Analysis of a Novel In-Wheel Machine-Based Powertrain for HTS Maglev Systems
High-temperature superconducting (HTS) maglev systems, as promising transportation solutions, have garnered growing attention in maglev transportation due to their inherent passive self-stability. To leverage this advantage, this paper pro-poses a compact propulsion system featuring a contactless power-train with a permanent magnet electrodynamic in-wheel motor (PMEIM). First, analytical modelling is employed to characterize the external magnetic field of the PMEIM, and its characteristics under multiple operating conditions are derived via coordinate transformation. Subsequently, the eddy current model of the secondary conductor plate is established, and its reflected mag-netic field is solved. Based on this, the electromagnetic force model of the PMEIM powertrain is developed in accordance with the magnetic charge theory, and the corresponding mechanical characteristics are determined. Next, the PMEIM design is con-ducted, with its load characteristics and transient response eval-uated by electromagnetic analysis and co-simulation. Finally, a small-scale prototype is fabricated and tested. Results indicate that theoretical predictions are in close agreement with the ex-perimental measurements, with the measured propulsion and guidance forces being 12.70 N and 41.14 N, respectively, under rated operating conditions. The integrated PMEIM configuration enables contactless force and torque transmission, demonstrating potential as a compact, flexible, and cost-effective propulsion solution for HTS maglev systems.
- Open Access
Design and Investigation of Powertrain with In-Wheel Motor for Permanent Magnet Electrodynamic Suspension Maglev Car
A new type of transportation vehicle, the maglev car, is gaining attention in the automotive and maglev industries due to its potential to meet personalized urban mobility and future travel needs. To optimize the chassis layout of maglev cars, this paper proposes a compact powertrain integrating electrodynamic suspension with in-wheel motor technology, in which a permanent magnet electrodynamic in-wheel motor (PMEIM) enables integrated propulsion and levitation. First, the PMEIM external magnetic field distribution is characterized by analytical and finite element (FEM) approaches, revealing the magnetic field distortion of the contactless powertrain. Subsequently, the steady-state electromagnetic force is modeled and the operating states of the PMEIM powertrain are calculated and determined. Next, the PMEIM electromagnetic design is conducted, and its electromagnetic structure rationality is verified through magnetic circuit and parametric analysis. Finally, an equivalent prototype is constructed, and the non-contact electromagnetic forces of the PMEIM are measured in bench testing. Results indicate that the PMEIM powertrain performs propulsion and levitation functions, demonstrating 14.2 N propulsion force and 45.8 N levitation force under the rated condition, with a levitation–weight ratio of 2.52, which hold promise as a compact and flexible drivetrain solution for maglev cars.
Open AccessDesign and Investigation of Powertrain with In-Wheel Motor for Permanent Magnet Electrodynamic Suspension Maglev Car
A new type of transportation vehicle, the maglev car, is gaining attention in the automotive and maglev industries due to its potential to meet personalized urban mobility and future travel needs. To optimize the chassis layout of maglev cars, this paper proposes a compact powertrain integrating electrodynamic suspension with in-wheel motor technology, in which a permanent magnet electrodynamic in-wheel motor (PMEIM) enables integrated propulsion and levitation. First, the PMEIM external magnetic field distribution is characterized by analytical and finite element (FEM) approaches, revealing the magnetic field distortion of the contactless powertrain. Subsequently, the steady-state electromagnetic force is modeled and the operating states of the PMEIM powertrain are calculated and determined. Next, the PMEIM electromagnetic design is conducted, and its electromagnetic structure rationality is verified through magnetic circuit and parametric analysis. Finally, an equivalent prototype is constructed, and the non-contact electromagnetic forces of the PMEIM are measured in bench testing. Results indicate that the PMEIM powertrain performs propulsion and levitation functions, demonstrating 14.2 N propulsion force and 45.8 N levitation force under the rated condition, with a levitation–weight ratio of 2.52, which hold promise as a compact and flexible drivetrain solution for maglev cars.
- 9 January 2026
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 59 (2) , 025005
Analysis of a low-normal-force coreless PMLSM for HTSP maglev propulsion system: finite element and analytical modeling
For high-speed operation of the high-temperature superconducting pinning (HTSP) maglev, adopting a coreless permanent magnet linear synchronous motor as the propulsion system ensures sufficient thrust while maintaining low normal force, thereby reducing the additional load imposed on the levitation system. In this study, based on the linear motor adopted in the HTSP maglev high-speed engineering prototype vehicle and test line, a three-dimensional finite element (FE) model is established to analyze the characteristics of the air-gap magnetic field distribution. The electromagnetic force of coreless and iron-core designs is compared. Subsequently, a two-dimensional analytical model is developed and further refined by incorporating the lateral end effect. Based on the three-dimensional magnetic field distribution obtained from the FE analysis, the analytical model is extended to a quasi-three-dimensional model. By comparing the analytical and FE models, the validity of the proposed analytical model is verified. On this basis, the influence of the air-gap length and the amplitude of the stator current on the electromagnetic force is investigated. The proposed analytical model is highly efficient in electromagnetic force calculation, providing a foundation for electromechanical coupling dynamics simulation of the levitation and propulsion systems in HTSP maglev.
- 9 January 2026
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 59 (2) , 025005
Analysis of a low-normal-force coreless PMLSM for HTSP maglev propulsion system: finite element and analytical modeling
For high-speed operation of the high-temperature superconducting pinning (HTSP) maglev, adopting a coreless permanent magnet linear synchronous motor as the propulsion system ensures sufficient thrust while maintaining low normal force, thereby reducing the additional load imposed on the levitation system. In this study, based on the linear motor adopted in the HTSP maglev high-speed engineering prototype vehicle and test line, a three-dimensional finite element (FE) model is established to analyze the characteristics of the air-gap magnetic field distribution. The electromagnetic force of coreless and iron-core designs is compared. Subsequently, a two-dimensional analytical model is developed and further refined by incorporating the lateral end effect. Based on the three-dimensional magnetic field distribution obtained from the FE analysis, the analytical model is extended to a quasi-three-dimensional model. By comparing the analytical and FE models, the validity of the proposed analytical model is verified. On this basis, the influence of the air-gap length and the amplitude of the stator current on the electromagnetic force is investigated. The proposed analytical model is highly efficient in electromagnetic force calculation, providing a foundation for electromechanical coupling dynamics simulation of the levitation and propulsion systems in HTSP maglev.
- 31 July 2025
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 58 (31) , 315001
Design and parametric analysis of linear synchronous motor with a novel electromagnetic Halbach array in HTS maglev system
As a promising transportation solution, the high-temperature superconducting (HTS) maglev system is gaining attention in magnetic levitation technology due to its inherent passive self-stability. To align with this characteristic, this paper proposes a compact propulsion system featuring a linear synchronous motor (LSM) with an electromagnetic Halbach (EH) array. In this configuration, the air gap magnetic field is excited by the EH array with a triangular winding pattern. First, the magnetic field distribution of the EH array is characterized via analytical and finite element (FEM) modeling, and the single-side magnetic field performance is validated. Subsequently, the electromagnetic design of the EH-LSM is developed based on the novel HTS maglev suspension frame of the University of L’Aquila model 4 (UAQ4) Italian maglev train. The electromagnetic force characteristics are analyzed using analytical calculation and FEM simulation. The thrust error is controlled within 2.53%, meeting the requirements of the preset operating condition, while the normal force remains at a low level, approaching zero. Meanwhile, the electromagnetic force characteristics can be regulated by adjusting the current phase. Next, parametric analysis of the EH-LSM is performed to obtain the evolution characteristics of the magnetic field and thrust under different secondary structure dimensions and current inputs. The results indicate that the EH-LSM performs propulsion and holds promise as a compact and flexible driving solution in the HTS maglev system.
- 31 July 2025
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 58 (31) , 315001
Design and parametric analysis of linear synchronous motor with a novel electromagnetic Halbach array in HTS maglev system
As a promising transportation solution, the high-temperature superconducting (HTS) maglev system is gaining attention in magnetic levitation technology due to its inherent passive self-stability. To align with this characteristic, this paper proposes a compact propulsion system featuring a linear synchronous motor (LSM) with an electromagnetic Halbach (EH) array. In this configuration, the air gap magnetic field is excited by the EH array with a triangular winding pattern. First, the magnetic field distribution of the EH array is characterized via analytical and finite element (FEM) modeling, and the single-side magnetic field performance is validated. Subsequently, the electromagnetic design of the EH-LSM is developed based on the novel HTS maglev suspension frame of the University of L’Aquila model 4 (UAQ4) Italian maglev train. The electromagnetic force characteristics are analyzed using analytical calculation and FEM simulation. The thrust error is controlled within 2.53%, meeting the requirements of the preset operating condition, while the normal force remains at a low level, approaching zero. Meanwhile, the electromagnetic force characteristics can be regulated by adjusting the current phase. Next, parametric analysis of the EH-LSM is performed to obtain the evolution characteristics of the magnetic field and thrust under different secondary structure dimensions and current inputs. The results indicate that the EH-LSM performs propulsion and holds promise as a compact and flexible driving solution in the HTS maglev system.
- Open Access
- 11 February 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (6)
Stiffness characteristic of HTS pinning maglev system with electromagnetic compensation device
The high-temperature superconducting (HTS) pinning magnet levitation (maglev) train, with its unique self-stabilizing and levitation-guidance integration, holds great potential for high-speed transportation. The levitation stiffness between the train and permanent magnet guideway (PMG) is crucial for studying HTS maglev dynamics and vibration reduction design. However, the magnetic hysteresis characteristics of HTS bulk can alter levitation stiffness. During high-speed operation, the high-frequency magnetic field excitation from PMG induces eddy current losses in the HTS bulk, reducing levitation force and levitation stiffness, thereby compromising train safety and increasing vibrations. Therefore, this paper investigates the HTS maglev system with an electromagnetic compensation (EMC) device to compensate for this loss, measuring and analyzing its levitation stiffness. First, a quasi-static stiffness experiment was designed to analyze and summarize the variation of levitation stiffness under different current intensities. Second, based on the experimental results, a vertical motion model was proposed and validated using the Lyapunov method. Then, dynamic experiments were designed to analyze the dynamic response of the system at different frequencies. Finally, the model simulations were combined with dynamic experiments to analyze the phenomena and dynamic characteristics of levitation stiffness changes in the system. This paper shows that the EMC device can effectively enhance levitation stiffness and improve the stability of the system under high-frequency vibrations. The levitation stiffness characteristics proposed in this study can provide relevant references for subsequent stiffness optimization and shock absorber design.
- 11 February 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (6)
Open AccessStiffness characteristic of HTS pinning maglev system with electromagnetic compensation device
The high-temperature superconducting (HTS) pinning magnet levitation (maglev) train, with its unique self-stabilizing and levitation-guidance integration, holds great potential for high-speed transportation. The levitation stiffness between the train and permanent magnet guideway (PMG) is crucial for studying HTS maglev dynamics and vibration reduction design. However, the magnetic hysteresis characteristics of HTS bulk can alter levitation stiffness. During high-speed operation, the high-frequency magnetic field excitation from PMG induces eddy current losses in the HTS bulk, reducing levitation force and levitation stiffness, thereby compromising train safety and increasing vibrations. Therefore, this paper investigates the HTS maglev system with an electromagnetic compensation (EMC) device to compensate for this loss, measuring and analyzing its levitation stiffness. First, a quasi-static stiffness experiment was designed to analyze and summarize the variation of levitation stiffness under different current intensities. Second, based on the experimental results, a vertical motion model was proposed and validated using the Lyapunov method. Then, dynamic experiments were designed to analyze the dynamic response of the system at different frequencies. Finally, the model simulations were combined with dynamic experiments to analyze the phenomena and dynamic characteristics of levitation stiffness changes in the system. This paper shows that the EMC device can effectively enhance levitation stiffness and improve the stability of the system under high-frequency vibrations. The levitation stiffness characteristics proposed in this study can provide relevant references for subsequent stiffness optimization and shock absorber design.