Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Haotong Han has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Sensitivity-Guided BESS Siting and Sizing with Uncertainty-Aware Scheduling in Renewable-Rich Distribution Networks

    by Jun Ma, Jishen Peng, Haotong Han, Liye Song, Hao Liu

    High penetrations of wind and photovoltaic generation create simultaneous challenges for battery energy storage system (BESS) planning in distribution networks, including differences in nodal regulation value, power-energy configuration, and day-ahead operation under forecast uncertainty. This study develops a sequential planning-to-operation workflow comprising candidate-bus generation, siting and sizing within the candidate set, and finite-scenario day-ahead scheduling for a fixed configuration. First, nodal net-injection sensitivities, Jacobian-assisted pre-screening, and deterministic topology/support safeguards are used to generate the main candidate set, and alternating-current (AC) finite-difference refinement is performed only for the sensitivity-led fast set; in the IEEE-33 system, this refinement reduces the number of AC power-flow calls from 65 for full-node analysis to 17. Next, Sensitivity-Guided Envelope-Based Nonanticipative Adjustable Recourse Optimal Power Flow (SG-ENAR-OPF) is solved separately for each bus in the main candidate set; the BESS location and power/energy capacities are jointly determined subject to the P-Q LinDistFlow model, BESS duration constraints, a shared affine response, and finite-scenario constraints. The full-node audit serves only as an independent paper-level validation benchmark and is not part of the deployable workflow. After the configuration is fixed, interval forecasts for load, photovoltaic (PV) output, and wind-turbine (WT) output at q05/q50/q95 are used to construct 25 static load-renewable disturbance points and seven temporal stress paths, over which a shared finite-scenario day-ahead policy is optimized. The IEEE-33 MAIN case selects Bus 30, with BESS capacities of approximately 10.66 MW/10.66 MWh. Using scaled public time-series data, the final policy is replayed over 46 consecutive 24 h execution windows, comprising 1104 h actual trajectories; under the 0.002 MW/MWh storage-engineering criterion, all 46/46 windows pass storage engineering validation, and energy continuity is maintained across all 45/45 interday boundaries. Further nonlinear AC post-validation converges at all 1104/1104 operating points, of which 1058/1104 satisfy the complete voltage and branch-capacity constraints. Supplementary results for IEEE-69 show that the workflow can be executed on a second radial test feeder. However, the conclusions are strictly limited to the tested feeders, finite scenarios, scaled public-data settings, and stated engineering tolerances and do not constitute a formal guarantee over a continuous uncertainty domain or of general cross-system applicability.


  • Open Access

    ADDF: Multi-Step Load Interval Forecasting for Sustainable Power Systems

    by Jun Ma, Jishen Peng, Haotong Han, Liye Song, Hao Liu

    The transition toward sustainable power systems requires load forecasting methods that can support renewable integration under increasing uncertainty. However, many deep learning models mix historical load, temporal priors, and external drivers in black-box structures, and often assume that true future driver values are available. To address these issues, this study proposes ADDF (Automatic Driver Discovery and Fusion), a semi-explicit self-driven framework for multi-step load interval forecasting. ADDF organizes historical load, calendar priors, and external drivers into three functional branches to distinguish load inertia, temporal regularity, and external forcing. The Driver Branch estimates future driver states under practical information constraints and uses dynamic gating to screen useful driving information. The three branch representations are adaptively integrated through Three-Way Fusion, followed by bounded residual correction to generate multi-step quantile forecasts. Experiments on the Panama electricity load dataset and ETTh1 dataset under one-step and 24-step settings show that ADDF achieves competitive point accuracy and interval prediction performance. Mechanism analyses indicate that the proposed branch-level structure provides clearer interpretability than post-hoc black-box explanations. The framework offers uncertainty-aware forecasting support for sustainable power system operation, including day-ahead scheduling, reserve planning, and energy management.

  • Open Access

    Research on Photovoltaic Output Power Forecasting Based on an Attention-Enhanced BiGRU Optimized by an Improved Marine Predators Algorithm

    by Shanglin Liu, Hua Fu, Sen Xie, Haotong Han, Hao Liu, Bing Han, Peng Cui

    Accurate photovoltaic (PV) output power forecasting is essential for reliable power system operation, yet rapidly changing meteorological conditions often degrade forecasting accuracy. This study proposes an attention-enhanced bidirectional gated recurrent unit (BiGRU) optimized by an improved Marine Predators Algorithm (IMPA) for PV output power forecasting. Kernel Principal Component Analysis (KPCA) is first employed to extract compact nonlinear representations and suppress redundant features. Then, a dual multi-head self-attention mechanism is integrated before and after the BiGRU layer to strengthen temporal feature learning under fluctuating weather. Finally, the IMPA is designed to improve exploration–exploitation balance and automatically optimize key hyperparameters. Experiments under sunny, cloudy, and rainy conditions demonstrate that IMPA-Att-BiGRU reduces MAE and RMSE by 35.7–58.5% and 22.8–49.1% versus BiGRU, respectively, while increasing R2 by 2.2–4.1 percentage points. Against the best benchmark (LSTM), MAE and RMSE are further reduced by 38.1–49.5% and 33.8–52.4%. Moreover, in a cross-day rolling forecasting test with fivefold results, IMPA-Att-BiGRU achieves 62.4% MAE and 49.3% RMSE reductions over BiGRU, confirming robust performance under long-horizon error accumulation.


  • Open Access

    IAVOA–EATCN: An Adaptive Deep Framework for Accurate Power Load Forecasting

    by Ziang Peng, Haotong Han, Jun Ma

    With the large-scale integration of renewable energy, the operational complexity of power systems has increased, placing higher demands on the accuracy of load forecasting. To address the nonlinear characteristics of load variations and improve feature utilization, this paper proposes an IAVOA–EATCN load forecasting model. In the feature engineering stage, an expand–reduce transformation is employed to reconstruct the original multi-feature inputs, and variational mode decomposition (VMD) is further applied to extract low- and high-frequency components, thereby compressing redundant features while preserving essential information structures. In terms of model architecture, the nonlinear representation capability of the temporal convolutional network (TCN) is enhanced by introducing the FlexSwish activation function, and an Efficient Channel Attention (ECA) mechanism is integrated to strengthen the perception of critical features. For parameter optimization, an improved African Vulture Optimization Algorithm (IAVOA) is proposed, which initializes the population using perturbation-enhanced dynamic Tent mapping, balances global exploration and local exploitation through adaptive parameter control, and incorporates elite retention and migration mechanisms to avoid premature convergence. Experimental results on real-world load data demonstrate that the proposed model achieves RMSE, R2, and MAE values of 26.5544, 0.9804, and 18.5589, respectively, significantly outperforming benchmark methods and exhibiting strong generalization capability and practical potential for intelligent load forecasting.


  • Open Access

    Research on a Short-Term Electric Load Forecasting Model Based on Improved BWO-Optimized Dilated BiGRU

    by Ziang Peng, Haotong Han, Jun Ma

    In the context of global efforts toward energy conservation and emission reduction, accurate short-term electric load forecasting plays a crucial role in improving energy efficiency, enabling low-carbon dispatching, and supporting sustainable power system operations. To address the growing demand for accuracy and stability in this domain, this paper proposes a novel prediction model tailored for power systems. The proposed method combines Spearman correlation analysis with modal decomposition techniques to compress redundant features while preserving key information, resulting in more informative and cleaner input representations. In terms of model architecture, this study integrates Bidirectional Gated Recurrent Units (BiGRUs) with dilated convolution. This design improves the model’s capacity to capture long-range dependencies and complex relationships. For parameter optimization, an Improved Beluga Whale Optimization (IBWO) algorithm is introduced, incorporating dynamic population initialization, adaptive Lévy flight mechanisms, and refined convergence procedures to enhance search efficiency and robustness. Experiments on real-world datasets demonstrate that the proposed model achieves excellent forecasting performance (RMSE = 26.1706, MAE = 18.5462, R2 = 0.9812), combining high predictive accuracy with strong generalization. These advancements contribute to more efficient energy scheduling and reduced environmental impact, making the model well-suited for intelligent and sustainable load forecasting applications in environmentally conscious power systems.


  • Open Access

    Research on Load Forecasting Prediction Model Based on Modified Sand Cat Swarm Optimization and SelfAttention TCN

    by Haotong Han, Jishen Peng, Jun Ma, Hao Liu, Shanglin Liu

    The core structure of modern power systems reflects a fundamental symmetry between electricity supply and demand, and accurate load forecasting is essential for maintaining this dynamic balance. To improve the accuracy of short-term load forecasting in power systems, this paper proposes a novel model that combines a Multi-Strategy Improved Sand Cat Swarm Optimization algorithm (MSCSO) with a Self-Attention Temporal Convolutional Network (SA TCN). The model constructs efficient input features through data denoising, correlation filtering, and dimensionality reduction using UMAP. MSCSO integrates Uniform Tent Chaos Mapping, a sensitivity enhancement mechanism, and Lévy flight to optimize key parameters of the SA TCN, ensuring symmetrical exploration and stable convergence in the solution space. The self-attention mechanism exhibits structural symmetry when processing each position in the input sequence and does not rely on fixed positional order, enabling the model to more effectively capture long-term dependencies and preserve the symmetry of the sequence structure—demonstrating its advantage in symmetry-based modeling. Experimental results on historical load data from Panama show that the proposed model achieves excellent forecasting accuracy (RMSE = 24.7072, MAE = 17.5225, R2 = 0.9830), highlighting its innovation and applicability in symmetrical system environments.


  • Open Access

    Research on load forecasting based on CEEMDAN SE VMD and SelfAttention TCN fusion model

    by Haotong Han, Jishen Peng, Jun Ma, Shang Lin Liu, Hao Liu

    In the context of increasing electricity consumption and the growing complexity of energy usage patterns, accurate power load forecasting faces more significant challenges. Given the widespread demand for precise load curve prediction, this paper proposes a CEEMDAN-SE-VMD + SelfAttention-TCN Fusion model. Load curves contain rich information, and comprehensive information mining contributes to prediction accuracy. Specifically, the methodology first employs Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN) to decompose the load curve, where the resulting Intrinsic Mode Functions (IMFs) are adaptively categorized into high and low-frequency components using Sample Entropy (SE). The high-frequency components undergo further extraction through Variational Mode Decomposition (VMD), while the low-frequency components are directly utilized as model inputs without additional processing. Through this process, the original load curve is reconstructively expressed as sequences of high and low-frequency components. These reconstructed sequences are then fed into Self-Attention Temporal Convolutional Network (TCN) for prediction, and the individual predictions are integrated to generate the final forecast. Using historical German power load data from ENTSO for case analysis, the model achieves an Root Mean Square Error (RMSE) of 24.1293 (MW), Mean Absolute Error (MAE) of 17.268 (MW), and R-square of 0.9838, surpassing the prediction accuracy of other comparative models. Experimental results reveal that the signal decomposition and reconstruction process enables more effective expression of deep characteristic information inherent in load data, thereby enhancing model learning performance. Furthermore, the self-attention mechanism strengthens TCN’s ability to capture data dependencies. The proposed model demonstrates both a high tolerance for raw load data and superior prediction accuracy, with experimental validation confirming its excellent performance in real-world short-term power load forecasting applications.


  • Open Access

    A Short-term Electricity Load Forecasting Model:CEEMDAN-SE-VMD+SelfAttention-TCN Fusion Model

    by HaoTong Han, JiShen Peng, Jun Ma, ShangLin Liu, Hao Liu

    Under the increasing electricity consumption trend and complex power consumption forms, accurate power load forecasting faces severe challenges. This paper proposes the CEEMDAN-SE-VMD + SelfAttention-TCN Fusion model. Initially, the original power load data undergo decomposition using CEEMDAN to generate Intrinsic Mode Functions (IMFs). These IMFs are then adaptively differentiated into high- and low-frequency components using Sample Entropy (SE), with high-frequency components further extracted twice via VMD. Subsequently, the original load data are reconstructed into sequences of high and low-frequency components. These sequences are input into TCN enhanced by self-attention for prediction, integrating results into final predictions. Using historical power load data from ENTSO Germany, an example achieves RMSE 24.1293, MAE 17.268, and R2 0.9838. Compared to SelfAttention-TCN without reconstruction, RMSE decreases by 25.5326, MAE 19.3769, R2 increases by 0.0515. The example illustrates that signal decomposition and reconstruction effectively capture latent deep features in load data, aiding model learning. Self-attention enhances TCN's ability to learn complex dependencies, improving prediction accuracy. This model demonstrates high tolerance to raw load data and strong performance in short-term power load forecasting tasks.