Peter G. Berthelemy
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Peter G. Berthelemy has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Corwin James Wright
Centre for Climate Adaptation and Environment Research, University of Bath, Bath, UK
12 shared publications - Lars Hoffmann
Jülich Supercomputing Centre, Forschungszentrum Jülich, Jülich, Germany
12 shared publications - Neil P. Hindley
Centre for Climate Adaptation and Environment Research, University of Bath, Bath, UK
11 shared publications - Phoebe E. Noble
University of Bath, Bath, UK
11 shared publications - Haruka Okui
University of Bath, Bath, UK
1 shared publication - Inna Polichtchouk
ECMWF Reading UK
1 shared publication
Latest Publications
- Open Access
- 13 April 2026
- Published by Wiley
Assessing model stratospheric gravity wave forecast accuracy against satellite observations using the SAL method
- 13 April 2026
- Published by Wiley
Open AccessAssessing model stratospheric gravity wave forecast accuracy against satellite observations using the SAL method
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Lead-time independence of gravity-wave forecast skill in operational analysis and forecasts
Atmospheric gravity waves (GWs) are a key driver of vertical energy and momentum transport in the atmosphere, with important implications for large-scale dynamics and chemistry. However, they remain difficult to predict in operational weather and climate models due to their small spatial scales relative to model resolution, and are typically not assimilated into numerical weather prediction (NWP) systems because of the large departures they introduce from model initial conditions.Here we use stratospheric temperature measurements from the Atmospheric Infrared Sounder (AIRS) and the Cross-track Infrared Sounder (CrIS) to evaluate how well archived operational analyses and forecasts from ECMWF’s Integrated Forecast System reproduce observed GW activity over Greenland, a major Northern Hemisphere source region for orographic GWs. The combined AIRS–CrIS sampling at high latitudes provides an unusually high measurement cadence, enabling assessment of forecast performance and time variability at relatively fine temporal resolution.Operational analyses and forecasts with lead times of up to 240 h are sampled at the AIRS and CrIS measurement footprints and regridded to a common resolution to allow consistent spectral analysis. A 2D+1 Stockwell Transform is applied to both synthetic and real observations to characterise GW amplitudes and spatial structure, producing directly comparable GW fields across forecast lead times.Using a Structure–Amplitude–Location (SAL) framework adapted from precipitation forecast verification, we quantify the evolution of GW forecast skill with lead time. We find that model performance exhibits only weak dependence on forecast range: across all lead times, the model systematically produces GWs with smaller horizontal scales and reduced amplitudes relative to observations, while errors in wave location increase only modestly with lead time. This behaviour is unexpected, as shorter lead times are associated with more accurate resolved winds, and would therefore be expected to yield more accurate GW generation. The results suggest that errors in simulated GW characteristics in operational forecasts are dominated by structural and representational limitations rather than by forecast wind errors alone.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessLead-time independence of gravity-wave forecast skill in operational analysis and forecasts
Atmospheric gravity waves (GWs) are a key driver of vertical energy and momentum transport in the atmosphere, with important implications for large-scale dynamics and chemistry. However, they remain difficult to predict in operational weather and climate models due to their small spatial scales relative to model resolution, and are typically not assimilated into numerical weather prediction (NWP) systems because of the large departures they introduce from model initial conditions.Here we use stratospheric temperature measurements from the Atmospheric Infrared Sounder (AIRS) and the Cross-track Infrared Sounder (CrIS) to evaluate how well archived operational analyses and forecasts from ECMWF’s Integrated Forecast System reproduce observed GW activity over Greenland, a major Northern Hemisphere source region for orographic GWs. The combined AIRS–CrIS sampling at high latitudes provides an unusually high measurement cadence, enabling assessment of forecast performance and time variability at relatively fine temporal resolution.Operational analyses and forecasts with lead times of up to 240 h are sampled at the AIRS and CrIS measurement footprints and regridded to a common resolution to allow consistent spectral analysis. A 2D+1 Stockwell Transform is applied to both synthetic and real observations to characterise GW amplitudes and spatial structure, producing directly comparable GW fields across forecast lead times.Using a Structure–Amplitude–Location (SAL) framework adapted from precipitation forecast verification, we quantify the evolution of GW forecast skill with lead time. We find that model performance exhibits only weak dependence on forecast range: across all lead times, the model systematically produces GWs with smaller horizontal scales and reduced amplitudes relative to observations, while errors in wave location increase only modestly with lead time. This behaviour is unexpected, as shorter lead times are associated with more accurate resolved winds, and would therefore be expected to yield more accurate GW generation. The results suggest that errors in simulated GW characteristics in operational forecasts are dominated by structural and representational limitations rather than by forecast wind errors alone.
- Open Access
- 4 December 2025
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 25 (23) , 17595-17611
A novel identification method for stratospheric gravity waves in nadir viewing satellite observations
Atmospheric gravity waves (GWs) are an important mechanism for vertical transport of energy and momentum through the atmosphere. Their impacts are apparent at all scales, including aviation, weather, and climate. Identifying stratospheric GWs from satellite observations is challenging due to instrument noise and effects of weather processes, but they can be observed from nadir sounders such as the AIRS instrument onboard Aqua. Here, a new method (hereafter “neighbourhood method”) to detect GW information is presented and applied to AIRS data. This uses a variant of the 3D S-transform to calculate the horizontal wavenumbers of temperature perturbations, then find areas of spatially constant horizontal wavenumbers (assumed to be GWs), which allow for creating a binary wave-presence mask. We describe the concept of the neighbourhood method and use it to investigate GW amplitudes, zonal pseudomomentum fluxes, and vertical wavelengths over 5 years of AIRS data. We compare these results to those calculated from GWs detected using another widely used method based on an amplitude cutoff. 35 % of regions of wave activity detected using the neighbourhood method have amplitudes lower than is visible using the amplitude cutoff method. Three regions are studied in greater depth: the Rocky Mountains, North Africa, and New Zealand/Tasmania. GWs detected using the neighbourhood method have wave phase propagation angles consistent with linear theory. Using the neighbourhood method produces new statistics for regional and global GW studies, which compare favourably to the amplitude cutoff GW detection method.
- 4 December 2025
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 25 (23) , 17595-17611
Open AccessA novel identification method for stratospheric gravity waves in nadir viewing satellite observations
Atmospheric gravity waves (GWs) are an important mechanism for vertical transport of energy and momentum through the atmosphere. Their impacts are apparent at all scales, including aviation, weather, and climate. Identifying stratospheric GWs from satellite observations is challenging due to instrument noise and effects of weather processes, but they can be observed from nadir sounders such as the AIRS instrument onboard Aqua. Here, a new method (hereafter “neighbourhood method”) to detect GW information is presented and applied to AIRS data. This uses a variant of the 3D S-transform to calculate the horizontal wavenumbers of temperature perturbations, then find areas of spatially constant horizontal wavenumbers (assumed to be GWs), which allow for creating a binary wave-presence mask. We describe the concept of the neighbourhood method and use it to investigate GW amplitudes, zonal pseudomomentum fluxes, and vertical wavelengths over 5 years of AIRS data. We compare these results to those calculated from GWs detected using another widely used method based on an amplitude cutoff. 35 % of regions of wave activity detected using the neighbourhood method have amplitudes lower than is visible using the amplitude cutoff method. Three regions are studied in greater depth: the Rocky Mountains, North Africa, and New Zealand/Tasmania. GWs detected using the neighbourhood method have wave phase propagation angles consistent with linear theory. Using the neighbourhood method produces new statistics for regional and global GW studies, which compare favourably to the amplitude cutoff GW detection method.
- Open Access
- 12 July 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-22
Reply on RC3
Atmospheric gravity waves (GWs) are an important mechanism for vertical transport of energy and momentum through the atmosphere. Their impacts are apparent at all scales including aviation, weather, and climate. Identifying stratospheric GWs from satellite observations is challenging due to instrument noise and effects of weather processes, but they can be observed from nadir sounders such as the AIRS instrument onboard Aqua. Here, a new method (hereafter ‘neighbourhood method”) to detect GW information is presented and applied to AIRS data. We describe the concept of the neighbourhood method and use it to investigate GW amplitudes, zonal pseudomomentum fluxes, and vertical wavelengths over 5 years of AIRS data. We compare these results to those calculated from GWs detected using another widely used method based on a defined amplitude cutoff. The neighbourhood method reveals GW patterns in seasonal means that are not visible when using the amplitude cutoff method. Time series analysis suggests that GWs have a larger impact than was previously analysed from the amplitude cutoff detection method. ∼ 25 % of waves detected using the neighbourhood method have amplitudes lower than is visible using the amplitude cutoff method. Three regions are studied in greater depth: the Rocky Mountains, North Africa, and New Zealand/Tasmania. GWs detected using the neighbourhood method have realistic wave phase propagation angles, which are consistent with surface-levels winds from ERA5 climatological reanalyses. Using the neighbourhood method produces new statistics for regional and global GW studies, which compares favourably to the amplitude cutoff GW detection method.
- 12 July 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-22
Open AccessReply on RC3
Atmospheric gravity waves (GWs) are an important mechanism for vertical transport of energy and momentum through the atmosphere. Their impacts are apparent at all scales including aviation, weather, and climate. Identifying stratospheric GWs from satellite observations is challenging due to instrument noise and effects of weather processes, but they can be observed from nadir sounders such as the AIRS instrument onboard Aqua. Here, a new method (hereafter ‘neighbourhood method”) to detect GW information is presented and applied to AIRS data. We describe the concept of the neighbourhood method and use it to investigate GW amplitudes, zonal pseudomomentum fluxes, and vertical wavelengths over 5 years of AIRS data. We compare these results to those calculated from GWs detected using another widely used method based on a defined amplitude cutoff. The neighbourhood method reveals GW patterns in seasonal means that are not visible when using the amplitude cutoff method. Time series analysis suggests that GWs have a larger impact than was previously analysed from the amplitude cutoff detection method. ∼ 25 % of waves detected using the neighbourhood method have amplitudes lower than is visible using the amplitude cutoff method. Three regions are studied in greater depth: the Rocky Mountains, North Africa, and New Zealand/Tasmania. GWs detected using the neighbourhood method have realistic wave phase propagation angles, which are consistent with surface-levels winds from ERA5 climatological reanalyses. Using the neighbourhood method produces new statistics for regional and global GW studies, which compares favourably to the amplitude cutoff GW detection method.
- Open Access
- 12 July 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-22
Reply on RC1
Atmospheric gravity waves (GWs) are an important mechanism for vertical transport of energy and momentum through the atmosphere. Their impacts are apparent at all scales including aviation, weather, and climate. Identifying stratospheric GWs from satellite observations is challenging due to instrument noise and effects of weather processes, but they can be observed from nadir sounders such as the AIRS instrument onboard Aqua. Here, a new method (hereafter ‘neighbourhood method”) to detect GW information is presented and applied to AIRS data. We describe the concept of the neighbourhood method and use it to investigate GW amplitudes, zonal pseudomomentum fluxes, and vertical wavelengths over 5 years of AIRS data. We compare these results to those calculated from GWs detected using another widely used method based on a defined amplitude cutoff. The neighbourhood method reveals GW patterns in seasonal means that are not visible when using the amplitude cutoff method. Time series analysis suggests that GWs have a larger impact than was previously analysed from the amplitude cutoff detection method. ∼ 25 % of waves detected using the neighbourhood method have amplitudes lower than is visible using the amplitude cutoff method. Three regions are studied in greater depth: the Rocky Mountains, North Africa, and New Zealand/Tasmania. GWs detected using the neighbourhood method have realistic wave phase propagation angles, which are consistent with surface-levels winds from ERA5 climatological reanalyses. Using the neighbourhood method produces new statistics for regional and global GW studies, which compares favourably to the amplitude cutoff GW detection method.
- 12 July 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-22
Open AccessReply on RC1
Atmospheric gravity waves (GWs) are an important mechanism for vertical transport of energy and momentum through the atmosphere. Their impacts are apparent at all scales including aviation, weather, and climate. Identifying stratospheric GWs from satellite observations is challenging due to instrument noise and effects of weather processes, but they can be observed from nadir sounders such as the AIRS instrument onboard Aqua. Here, a new method (hereafter ‘neighbourhood method”) to detect GW information is presented and applied to AIRS data. We describe the concept of the neighbourhood method and use it to investigate GW amplitudes, zonal pseudomomentum fluxes, and vertical wavelengths over 5 years of AIRS data. We compare these results to those calculated from GWs detected using another widely used method based on a defined amplitude cutoff. The neighbourhood method reveals GW patterns in seasonal means that are not visible when using the amplitude cutoff method. Time series analysis suggests that GWs have a larger impact than was previously analysed from the amplitude cutoff detection method. ∼ 25 % of waves detected using the neighbourhood method have amplitudes lower than is visible using the amplitude cutoff method. Three regions are studied in greater depth: the Rocky Mountains, North Africa, and New Zealand/Tasmania. GWs detected using the neighbourhood method have realistic wave phase propagation angles, which are consistent with surface-levels winds from ERA5 climatological reanalyses. Using the neighbourhood method produces new statistics for regional and global GW studies, which compares favourably to the amplitude cutoff GW detection method.
- Open Access
- 12 July 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-22
Comment on egusphere-2025-455
Atmospheric gravity waves (GWs) are an important mechanism for vertical transport of energy and momentum through the atmosphere. Their impacts are apparent at all scales including aviation, weather, and climate. Identifying stratospheric GWs from satellite observations is challenging due to instrument noise and effects of weather processes, but they can be observed from nadir sounders such as the AIRS instrument onboard Aqua. Here, a new method (hereafter ‘neighbourhood method”) to detect GW information is presented and applied to AIRS data. We describe the concept of the neighbourhood method and use it to investigate GW amplitudes, zonal pseudomomentum fluxes, and vertical wavelengths over 5 years of AIRS data. We compare these results to those calculated from GWs detected using another widely used method based on a defined amplitude cutoff. The neighbourhood method reveals GW patterns in seasonal means that are not visible when using the amplitude cutoff method. Time series analysis suggests that GWs have a larger impact than was previously analysed from the amplitude cutoff detection method. ∼ 25 % of waves detected using the neighbourhood method have amplitudes lower than is visible using the amplitude cutoff method. Three regions are studied in greater depth: the Rocky Mountains, North Africa, and New Zealand/Tasmania. GWs detected using the neighbourhood method have realistic wave phase propagation angles, which are consistent with surface-levels winds from ERA5 climatological reanalyses. Using the neighbourhood method produces new statistics for regional and global GW studies, which compares favourably to the amplitude cutoff GW detection method.
- 12 July 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-22
Open AccessComment on egusphere-2025-455
Atmospheric gravity waves (GWs) are an important mechanism for vertical transport of energy and momentum through the atmosphere. Their impacts are apparent at all scales including aviation, weather, and climate. Identifying stratospheric GWs from satellite observations is challenging due to instrument noise and effects of weather processes, but they can be observed from nadir sounders such as the AIRS instrument onboard Aqua. Here, a new method (hereafter ‘neighbourhood method”) to detect GW information is presented and applied to AIRS data. We describe the concept of the neighbourhood method and use it to investigate GW amplitudes, zonal pseudomomentum fluxes, and vertical wavelengths over 5 years of AIRS data. We compare these results to those calculated from GWs detected using another widely used method based on a defined amplitude cutoff. The neighbourhood method reveals GW patterns in seasonal means that are not visible when using the amplitude cutoff method. Time series analysis suggests that GWs have a larger impact than was previously analysed from the amplitude cutoff detection method. ∼ 25 % of waves detected using the neighbourhood method have amplitudes lower than is visible using the amplitude cutoff method. Three regions are studied in greater depth: the Rocky Mountains, North Africa, and New Zealand/Tasmania. GWs detected using the neighbourhood method have realistic wave phase propagation angles, which are consistent with surface-levels winds from ERA5 climatological reanalyses. Using the neighbourhood method produces new statistics for regional and global GW studies, which compares favourably to the amplitude cutoff GW detection method.
- Open Access
- 12 July 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-22
Reply on RC2
Atmospheric gravity waves (GWs) are an important mechanism for vertical transport of energy and momentum through the atmosphere. Their impacts are apparent at all scales including aviation, weather, and climate. Identifying stratospheric GWs from satellite observations is challenging due to instrument noise and effects of weather processes, but they can be observed from nadir sounders such as the AIRS instrument onboard Aqua. Here, a new method (hereafter ‘neighbourhood method”) to detect GW information is presented and applied to AIRS data. We describe the concept of the neighbourhood method and use it to investigate GW amplitudes, zonal pseudomomentum fluxes, and vertical wavelengths over 5 years of AIRS data. We compare these results to those calculated from GWs detected using another widely used method based on a defined amplitude cutoff. The neighbourhood method reveals GW patterns in seasonal means that are not visible when using the amplitude cutoff method. Time series analysis suggests that GWs have a larger impact than was previously analysed from the amplitude cutoff detection method. ∼ 25 % of waves detected using the neighbourhood method have amplitudes lower than is visible using the amplitude cutoff method. Three regions are studied in greater depth: the Rocky Mountains, North Africa, and New Zealand/Tasmania. GWs detected using the neighbourhood method have realistic wave phase propagation angles, which are consistent with surface-levels winds from ERA5 climatological reanalyses. Using the neighbourhood method produces new statistics for regional and global GW studies, which compares favourably to the amplitude cutoff GW detection method.
- 12 July 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-22
Open AccessReply on RC2
Atmospheric gravity waves (GWs) are an important mechanism for vertical transport of energy and momentum through the atmosphere. Their impacts are apparent at all scales including aviation, weather, and climate. Identifying stratospheric GWs from satellite observations is challenging due to instrument noise and effects of weather processes, but they can be observed from nadir sounders such as the AIRS instrument onboard Aqua. Here, a new method (hereafter ‘neighbourhood method”) to detect GW information is presented and applied to AIRS data. We describe the concept of the neighbourhood method and use it to investigate GW amplitudes, zonal pseudomomentum fluxes, and vertical wavelengths over 5 years of AIRS data. We compare these results to those calculated from GWs detected using another widely used method based on a defined amplitude cutoff. The neighbourhood method reveals GW patterns in seasonal means that are not visible when using the amplitude cutoff method. Time series analysis suggests that GWs have a larger impact than was previously analysed from the amplitude cutoff detection method. ∼ 25 % of waves detected using the neighbourhood method have amplitudes lower than is visible using the amplitude cutoff method. Three regions are studied in greater depth: the Rocky Mountains, North Africa, and New Zealand/Tasmania. GWs detected using the neighbourhood method have realistic wave phase propagation angles, which are consistent with surface-levels winds from ERA5 climatological reanalyses. Using the neighbourhood method produces new statistics for regional and global GW studies, which compares favourably to the amplitude cutoff GW detection method.
- Open Access
- 27 March 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-22
Comment on egusphere-2025-455
Atmospheric gravity waves (GWs) are an important mechanism for vertical transport of energy and momentum through the atmosphere. Their impacts are apparent at all scales including aviation, weather, and climate. Identifying stratospheric GWs from satellite observations is challenging due to instrument noise and effects of weather processes, but they can be observed from nadir sounders such as the AIRS instrument onboard Aqua. Here, a new method (hereafter ‘neighbourhood method”) to detect GW information is presented and applied to AIRS data. We describe the concept of the neighbourhood method and use it to investigate GW amplitudes, zonal pseudomomentum fluxes, and vertical wavelengths over 5 years of AIRS data. We compare these results to those calculated from GWs detected using another widely used method based on a defined amplitude cutoff. The neighbourhood method reveals GW patterns in seasonal means that are not visible when using the amplitude cutoff method. Time series analysis suggests that GWs have a larger impact than was previously analysed from the amplitude cutoff detection method. ∼ 25 % of waves detected using the neighbourhood method have amplitudes lower than is visible using the amplitude cutoff method. Three regions are studied in greater depth: the Rocky Mountains, North Africa, and New Zealand/Tasmania. GWs detected using the neighbourhood method have realistic wave phase propagation angles, which are consistent with surface-levels winds from ERA5 climatological reanalyses. Using the neighbourhood method produces new statistics for regional and global GW studies, which compares favourably to the amplitude cutoff GW detection method.
- 27 March 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-22
Open AccessComment on egusphere-2025-455
Atmospheric gravity waves (GWs) are an important mechanism for vertical transport of energy and momentum through the atmosphere. Their impacts are apparent at all scales including aviation, weather, and climate. Identifying stratospheric GWs from satellite observations is challenging due to instrument noise and effects of weather processes, but they can be observed from nadir sounders such as the AIRS instrument onboard Aqua. Here, a new method (hereafter ‘neighbourhood method”) to detect GW information is presented and applied to AIRS data. We describe the concept of the neighbourhood method and use it to investigate GW amplitudes, zonal pseudomomentum fluxes, and vertical wavelengths over 5 years of AIRS data. We compare these results to those calculated from GWs detected using another widely used method based on a defined amplitude cutoff. The neighbourhood method reveals GW patterns in seasonal means that are not visible when using the amplitude cutoff method. Time series analysis suggests that GWs have a larger impact than was previously analysed from the amplitude cutoff detection method. ∼ 25 % of waves detected using the neighbourhood method have amplitudes lower than is visible using the amplitude cutoff method. Three regions are studied in greater depth: the Rocky Mountains, North Africa, and New Zealand/Tasmania. GWs detected using the neighbourhood method have realistic wave phase propagation angles, which are consistent with surface-levels winds from ERA5 climatological reanalyses. Using the neighbourhood method produces new statistics for regional and global GW studies, which compares favourably to the amplitude cutoff GW detection method.
- Open Access
- 13 March 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-22
Comment on egusphere-2025-455
Atmospheric gravity waves (GWs) are an important mechanism for vertical transport of energy and momentum through the atmosphere. Their impacts are apparent at all scales including aviation, weather, and climate. Identifying stratospheric GWs from satellite observations is challenging due to instrument noise and effects of weather processes, but they can be observed from nadir sounders such as the AIRS instrument onboard Aqua. Here, a new method (hereafter ‘neighbourhood method”) to detect GW information is presented and applied to AIRS data. We describe the concept of the neighbourhood method and use it to investigate GW amplitudes, zonal pseudomomentum fluxes, and vertical wavelengths over 5 years of AIRS data. We compare these results to those calculated from GWs detected using another widely used method based on a defined amplitude cutoff. The neighbourhood method reveals GW patterns in seasonal means that are not visible when using the amplitude cutoff method. Time series analysis suggests that GWs have a larger impact than was previously analysed from the amplitude cutoff detection method. ∼ 25 % of waves detected using the neighbourhood method have amplitudes lower than is visible using the amplitude cutoff method. Three regions are studied in greater depth: the Rocky Mountains, North Africa, and New Zealand/Tasmania. GWs detected using the neighbourhood method have realistic wave phase propagation angles, which are consistent with surface-levels winds from ERA5 climatological reanalyses. Using the neighbourhood method produces new statistics for regional and global GW studies, which compares favourably to the amplitude cutoff GW detection method.
- 13 March 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-22
Open AccessComment on egusphere-2025-455
Atmospheric gravity waves (GWs) are an important mechanism for vertical transport of energy and momentum through the atmosphere. Their impacts are apparent at all scales including aviation, weather, and climate. Identifying stratospheric GWs from satellite observations is challenging due to instrument noise and effects of weather processes, but they can be observed from nadir sounders such as the AIRS instrument onboard Aqua. Here, a new method (hereafter ‘neighbourhood method”) to detect GW information is presented and applied to AIRS data. We describe the concept of the neighbourhood method and use it to investigate GW amplitudes, zonal pseudomomentum fluxes, and vertical wavelengths over 5 years of AIRS data. We compare these results to those calculated from GWs detected using another widely used method based on a defined amplitude cutoff. The neighbourhood method reveals GW patterns in seasonal means that are not visible when using the amplitude cutoff method. Time series analysis suggests that GWs have a larger impact than was previously analysed from the amplitude cutoff detection method. ∼ 25 % of waves detected using the neighbourhood method have amplitudes lower than is visible using the amplitude cutoff method. Three regions are studied in greater depth: the Rocky Mountains, North Africa, and New Zealand/Tasmania. GWs detected using the neighbourhood method have realistic wave phase propagation angles, which are consistent with surface-levels winds from ERA5 climatological reanalyses. Using the neighbourhood method produces new statistics for regional and global GW studies, which compares favourably to the amplitude cutoff GW detection method.
- Open Access
- 11 March 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-22
Comment on egusphere-2025-455
Atmospheric gravity waves (GWs) are an important mechanism for vertical transport of energy and momentum through the atmosphere. Their impacts are apparent at all scales including aviation, weather, and climate. Identifying stratospheric GWs from satellite observations is challenging due to instrument noise and effects of weather processes, but they can be observed from nadir sounders such as the AIRS instrument onboard Aqua. Here, a new method (hereafter ‘neighbourhood method”) to detect GW information is presented and applied to AIRS data. We describe the concept of the neighbourhood method and use it to investigate GW amplitudes, zonal pseudomomentum fluxes, and vertical wavelengths over 5 years of AIRS data. We compare these results to those calculated from GWs detected using another widely used method based on a defined amplitude cutoff. The neighbourhood method reveals GW patterns in seasonal means that are not visible when using the amplitude cutoff method. Time series analysis suggests that GWs have a larger impact than was previously analysed from the amplitude cutoff detection method. ∼ 25 % of waves detected using the neighbourhood method have amplitudes lower than is visible using the amplitude cutoff method. Three regions are studied in greater depth: the Rocky Mountains, North Africa, and New Zealand/Tasmania. GWs detected using the neighbourhood method have realistic wave phase propagation angles, which are consistent with surface-levels winds from ERA5 climatological reanalyses. Using the neighbourhood method produces new statistics for regional and global GW studies, which compares favourably to the amplitude cutoff GW detection method.
- 11 March 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-22
Open AccessComment on egusphere-2025-455
Atmospheric gravity waves (GWs) are an important mechanism for vertical transport of energy and momentum through the atmosphere. Their impacts are apparent at all scales including aviation, weather, and climate. Identifying stratospheric GWs from satellite observations is challenging due to instrument noise and effects of weather processes, but they can be observed from nadir sounders such as the AIRS instrument onboard Aqua. Here, a new method (hereafter ‘neighbourhood method”) to detect GW information is presented and applied to AIRS data. We describe the concept of the neighbourhood method and use it to investigate GW amplitudes, zonal pseudomomentum fluxes, and vertical wavelengths over 5 years of AIRS data. We compare these results to those calculated from GWs detected using another widely used method based on a defined amplitude cutoff. The neighbourhood method reveals GW patterns in seasonal means that are not visible when using the amplitude cutoff method. Time series analysis suggests that GWs have a larger impact than was previously analysed from the amplitude cutoff detection method. ∼ 25 % of waves detected using the neighbourhood method have amplitudes lower than is visible using the amplitude cutoff method. Three regions are studied in greater depth: the Rocky Mountains, North Africa, and New Zealand/Tasmania. GWs detected using the neighbourhood method have realistic wave phase propagation angles, which are consistent with surface-levels winds from ERA5 climatological reanalyses. Using the neighbourhood method produces new statistics for regional and global GW studies, which compares favourably to the amplitude cutoff GW detection method.