John Kennedy dos Santos
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
John Kennedy dos Santos has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Luiz Henrique Quecine Grande
Luiz de Queiroz College of Agriculture, Department of Soil Science, University of São Paulo, Piracicaba, Brazil
4 shared publications - Moacir Tuzzin de Moraes
Luiz de Queiroz College of Agriculture, University of São Paulo, Piracicaba, Brazil
4 shared publications - Denizart Bolonhezi
Sugarcane Research Center, Agronomic Institute of Campinas (IAC), Ribeirão Preto, SP, Brazil
3 shared publications - Lucas Henrique Amaro da Silva
University of São Paulo, Luiz de Queiroz College of Agriculture (ESALQ/USP), Piracicaba, SP, Brazil
3 shared publications - Matheus Batista Néri Pereira
University of São Paulo, Luiz de Queiroz College of Agriculture (ESALQ/USP), Piracicaba, SP, Brazil
3 shared publications - Dayane Mércia Ribeiro Silva
Universidade Federal de Alagoas, Brazil
2 shared publications
Latest Publications
- Open Access
- 29 September 2026
- Published by Springer Nature in Plant and Soil
- p. 1-22
No-tillage soil structure increases sugarcane root elongation under mechanical and hydric stresses in an Oxisol
Background and aims: Mechanical and hydric stresses limit root elongation, while preserved soil structure in no-tillage mitigates these effects. We quantified the effects of physical stress on sugarcane root elongation and the role of soil structure in mitigating them, providing experimentally based parameterisations for soil–root interaction via semi-empirical models. Methods: Five levels of mechanical and hydric stress were established in soil samples from a long-term experiment under no-tillage (NT 31 ) and conventional tillage (CT 5 ). Repacked soil samples (T 0 ) were created to isolate the pore network effects in mitigating physical stress. Sugarcane seedlings were grown in each structural and physical stress condition, measuring the root elongation rate after 95 h. Semi-empirical models were developed using root elongation rate from each condition as a function of soil penetration resistance and degree of water saturation. Root growth was simulated for 45 days using RootBox model. Results: Root elongation rate decreased by 30% in NT 31 and up to 84% in T 0 . The 3D Gaussian model explained 47% (CT 5 ), 71% (NT 31 ), and 78% (T 0 ) of the elongation variability. Under high soil moisture (95%) and penetration resistance (6.2 MPa), root elongation rate in NT 31 was 8.2 times higher than in T 0 and 1.8 times greater than in CT 5 . Simulations showed rooting depth was 2 times greater in NT 31 than in T 0 . Conclusion: The semi-empirical models highlighted the key role of soil structure in mitigating physical stress on root elongation, as well as the potential of no-tillage to maintain and recover soil physical functions for root growth.
- 29 September 2026
- Published by Springer Nature in Plant and Soil
- p. 1-22
Open AccessNo-tillage soil structure increases sugarcane root elongation under mechanical and hydric stresses in an Oxisol
Background and aims: Mechanical and hydric stresses limit root elongation, while preserved soil structure in no-tillage mitigates these effects. We quantified the effects of physical stress on sugarcane root elongation and the role of soil structure in mitigating them, providing experimentally based parameterisations for soil–root interaction via semi-empirical models. Methods: Five levels of mechanical and hydric stress were established in soil samples from a long-term experiment under no-tillage (NT 31 ) and conventional tillage (CT 5 ). Repacked soil samples (T 0 ) were created to isolate the pore network effects in mitigating physical stress. Sugarcane seedlings were grown in each structural and physical stress condition, measuring the root elongation rate after 95 h. Semi-empirical models were developed using root elongation rate from each condition as a function of soil penetration resistance and degree of water saturation. Root growth was simulated for 45 days using RootBox model. Results: Root elongation rate decreased by 30% in NT 31 and up to 84% in T 0 . The 3D Gaussian model explained 47% (CT 5 ), 71% (NT 31 ), and 78% (T 0 ) of the elongation variability. Under high soil moisture (95%) and penetration resistance (6.2 MPa), root elongation rate in NT 31 was 8.2 times higher than in T 0 and 1.8 times greater than in CT 5 . Simulations showed rooting depth was 2 times greater in NT 31 than in T 0 . Conclusion: The semi-empirical models highlighted the key role of soil structure in mitigating physical stress on root elongation, as well as the potential of no-tillage to maintain and recover soil physical functions for root growth.
- 10 October 2025
- Published by Elsevier in Soil and Tillage Research
- Vol. 256
Soil hydraulic functions in a long-term conservation tillage system for sugarcane
- 10 October 2025
- Published by Elsevier in Soil and Tillage Research
- Vol. 256
Soil hydraulic functions in a long-term conservation tillage system for sugarcane
- Open Access
- 12 August 2025
- Published by Universidade do Estado de Santa Catarina in Revista de Ciências Agroveterinárias
- Vol. 24 (1) , 21-34
Hydric characteristics and agro-industrial quality of sugarcane under application of correctives and fertilizer in Alagoas, Brazil
The objective of this research was to evaluate meteorological variables, water balance and agro-industrial quality of sugarcane under isolated and combined application of pH correctives and organic and mineral fertilization in planting furrows, in rainfed conditions. The statistical design used was in randomized blocks, with five replications and 8 treatments: T1 = limestone, T2 = agricultural gypsum; T3 = poultry litter; T4 = T1 + T2; T5 = T1 + T3; T6 = T2 + T3; T7 = T1 + T2 + T3 and T8 = conventional mineral fertilizer. The cultivar used was RB92579 and the agro-industrial quality variables studied were: brix of broth, sugarcane broth apparent sucrose, broth purity, reducing sugars, total recoverable sugars and fiber. The air temperature was not a limiting factor for the growth of sugarcane. The crop evapotranspiration, in 16 months of cultivation, was 2,054 mm. In general, the application of agricultural gypsum in the planting furrow generates higher agro-industrial quality of the sugarcane in comparison with the application of poultry litter. The agro-industrial quality of sugarcane fields cultivated with agricultural limestone and conventional fertilization does not differ significantly from the areas where agricultural gypsum is applied or the areas where poultry litter is used.
- 12 August 2025
- Published by Universidade do Estado de Santa Catarina in Revista de Ciências Agroveterinárias
- Vol. 24 (1) , 21-34
Open AccessHydric characteristics and agro-industrial quality of sugarcane under application of correctives and fertilizer in Alagoas, Brazil
The objective of this research was to evaluate meteorological variables, water balance and agro-industrial quality of sugarcane under isolated and combined application of pH correctives and organic and mineral fertilization in planting furrows, in rainfed conditions. The statistical design used was in randomized blocks, with five replications and 8 treatments: T1 = limestone, T2 = agricultural gypsum; T3 = poultry litter; T4 = T1 + T2; T5 = T1 + T3; T6 = T2 + T3; T7 = T1 + T2 + T3 and T8 = conventional mineral fertilizer. The cultivar used was RB92579 and the agro-industrial quality variables studied were: brix of broth, sugarcane broth apparent sucrose, broth purity, reducing sugars, total recoverable sugars and fiber. The air temperature was not a limiting factor for the growth of sugarcane. The crop evapotranspiration, in 16 months of cultivation, was 2,054 mm. In general, the application of agricultural gypsum in the planting furrow generates higher agro-industrial quality of the sugarcane in comparison with the application of poultry litter. The agro-industrial quality of sugarcane fields cultivated with agricultural limestone and conventional fertilization does not differ significantly from the areas where agricultural gypsum is applied or the areas where poultry litter is used.
- Open Access
- 20 February 2025
- Published by Cambridge University Press (CUP) in Experimental Agriculture
- Vol. 61, e3
Modelling sugarcane root elongation in response to mechanical stress as an indicator of soil physical quality
Summary: The root elongation rate represents a biophysical process that can be directly affected by mechanical, water, thermal, and gaseous stresses in the soil to be used as a soil physical quality indicator. The objective of this study was to determine sugarcane root growth parameters under soil physical stress for different root diameter classes in an Oxisol from the Southeast of Brazil. The experimental design was entirely randomized in a factorial scheme 5 × 2 (mechanical × water stress) with three replications. The factor mechanical stress was composed of five compaction levels (1.04; 1.12; 1.19; 1.28; 1.36 Mg m–3). The factor water stress was composed of two matric potentials (–6 kPa and –33 kPa). Soil samples were collected from the 0.0–0.2 m layer of an Oxisol with a clayey texture. Pre-sprouted sugarcane seedlings were transplanted and conditioned in a growth chamber. Root length, volume, surface area, and diameter were quantified to generate root growth models as a function of physical stresses in the soil. Soil penetration resistance increases from 1.4 to 5 MPa reduced root elongation rate from 3.5 to 1.35 cm day–1 (–59%) and the average number of roots from 11 to 6 segments (–45%), respectively. The root volume, surface area, and length were reduced because of the increase in the compaction level. Coarse root diameter (1–2 mm) was weakly impacted by mechanical stress, whereas fine root diameter (0.5–1 mm) was more growth limited in compacted soils. The root elongation rate of sugarcane was modelled as a function of mechanical and water stress. Mechanical stress mainly affects the growth of sugarcane roots with small diameter.
- 20 February 2025
- Published by Cambridge University Press (CUP) in Experimental Agriculture
- Vol. 61, e3
Open AccessModelling sugarcane root elongation in response to mechanical stress as an indicator of soil physical quality
Summary: The root elongation rate represents a biophysical process that can be directly affected by mechanical, water, thermal, and gaseous stresses in the soil to be used as a soil physical quality indicator. The objective of this study was to determine sugarcane root growth parameters under soil physical stress for different root diameter classes in an Oxisol from the Southeast of Brazil. The experimental design was entirely randomized in a factorial scheme 5 × 2 (mechanical × water stress) with three replications. The factor mechanical stress was composed of five compaction levels (1.04; 1.12; 1.19; 1.28; 1.36 Mg m–3). The factor water stress was composed of two matric potentials (–6 kPa and –33 kPa). Soil samples were collected from the 0.0–0.2 m layer of an Oxisol with a clayey texture. Pre-sprouted sugarcane seedlings were transplanted and conditioned in a growth chamber. Root length, volume, surface area, and diameter were quantified to generate root growth models as a function of physical stresses in the soil. Soil penetration resistance increases from 1.4 to 5 MPa reduced root elongation rate from 3.5 to 1.35 cm day–1 (–59%) and the average number of roots from 11 to 6 segments (–45%), respectively. The root volume, surface area, and length were reduced because of the increase in the compaction level. Coarse root diameter (1–2 mm) was weakly impacted by mechanical stress, whereas fine root diameter (0.5–1 mm) was more growth limited in compacted soils. The root elongation rate of sugarcane was modelled as a function of mechanical and water stress. Mechanical stress mainly affects the growth of sugarcane roots with small diameter.
- Open Access
- 20 October 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (20) , 15091
Short-Term Agronomic and Economic Responses to the Adoption of Cover Crops for Corn Rotation in the Brazilian Semiarid Region
Cover crops (CCs) have demonstrated their significance in enhancing the agronomic and economic performance of corn in succession. In this paper, we assess the agronomic responses and short-term economic returns of adopting cover crops (CCs) for corn cultivation in the sandy soils of the semiarid region of northeast Brazil, with the aim of addressing the additional challenges of CCs adoption in semiarid regions. The field study was conducted in Arapiraca, Alagoas, under no-tillage conditions for two cropping seasons. A randomized complete block design was employed, comprising six CCs (sunn hemp, spectabilis, jack bean, pigeon pea, lab lab, and millet) treatments and one fallow, with 18 replications. The CCs were cultivated for 60 days before corn planting. Drip irrigation was applied during the grain-filling stage of corn growth. Over the two cropping seasons, the biomass and nutrient cycling of the CCs, corn yield, and economic returns were determined, as well as the total organic carbon (TOC) and Mehlich-1 extractable P levels in the soil after corn harvest. The grain yields with sunn hemp, spectabilis, and jack bean were superior (~10%) to that of the fallow (7.7 vs. 7.1 Mg ha−1), irrespective of the cropping season. Sunn hemp exhibited a higher biomass accumulation and ensured greater nutrient cycling, except for K, while lab lab and millet displayed a similar potential, although substantial variations were observed between seasons. Under sunn hemp and jack bean, the TOC increased by ~9%, particularly in the second season. Regarding the available P, spectabilis and jack bean exhibited the highest levels, with an increase of ~74% compared to the fallow (~31.1 vs. 17.9 mg dm−3). Spectabilis and lab lab demonstrated more promising results, both agronomically and economically. However, millet and sunn hemp have the potential to reduce costs over multiple cropping seasons. Therefore, the adoption of cover crops is a sustainable and economically viable agricultural practice. However, it is essential to acknowledge that our results do not represent rainfed conditions and require further investigation.
- 20 October 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (20) , 15091
Open AccessShort-Term Agronomic and Economic Responses to the Adoption of Cover Crops for Corn Rotation in the Brazilian Semiarid Region
Cover crops (CCs) have demonstrated their significance in enhancing the agronomic and economic performance of corn in succession. In this paper, we assess the agronomic responses and short-term economic returns of adopting cover crops (CCs) for corn cultivation in the sandy soils of the semiarid region of northeast Brazil, with the aim of addressing the additional challenges of CCs adoption in semiarid regions. The field study was conducted in Arapiraca, Alagoas, under no-tillage conditions for two cropping seasons. A randomized complete block design was employed, comprising six CCs (sunn hemp, spectabilis, jack bean, pigeon pea, lab lab, and millet) treatments and one fallow, with 18 replications. The CCs were cultivated for 60 days before corn planting. Drip irrigation was applied during the grain-filling stage of corn growth. Over the two cropping seasons, the biomass and nutrient cycling of the CCs, corn yield, and economic returns were determined, as well as the total organic carbon (TOC) and Mehlich-1 extractable P levels in the soil after corn harvest. The grain yields with sunn hemp, spectabilis, and jack bean were superior (~10%) to that of the fallow (7.7 vs. 7.1 Mg ha−1), irrespective of the cropping season. Sunn hemp exhibited a higher biomass accumulation and ensured greater nutrient cycling, except for K, while lab lab and millet displayed a similar potential, although substantial variations were observed between seasons. Under sunn hemp and jack bean, the TOC increased by ~9%, particularly in the second season. Regarding the available P, spectabilis and jack bean exhibited the highest levels, with an increase of ~74% compared to the fallow (~31.1 vs. 17.9 mg dm−3). Spectabilis and lab lab demonstrated more promising results, both agronomically and economically. However, millet and sunn hemp have the potential to reduce costs over multiple cropping seasons. Therefore, the adoption of cover crops is a sustainable and economically viable agricultural practice. However, it is essential to acknowledge that our results do not represent rainfed conditions and require further investigation.