YDYing Dong

Ying Dong

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ying Dong has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Microstructure Evolution and Toughening Mechanisms in the Nugget Zone of Friction-Stir-Welded X80 Pipeline Steel

    by Miaoye Han, Min Yang, Yinhui Rao, Xiong Luo, Ruihai Duan, Sheng Guo, Ying Dong, Shujin Chen

    Coarse grains and blocky M-A constituents are often generated in the heat-affected zone (HAZ) of fusion welded pipeline steel joints owing to high heat input, causing a significant deterioration of toughness. This study demonstrated the effect of heat input in friction stir welding (FSW) on the microstructure and toughness of the nugget zone (NZ), elucidating the microstructure evolution and toughening mechanism. The results revealed a marked reduction in effective grain size within the NZ at low heat input (LHI) and a significant increase in the ratio of the refined M-A constituent. Furthermore, the decreased heat input leads to weak texture components (D1, D2, and F) accompanied by a decrease in the kernel average misorientation (KAM) value. This microstructural optimization clearly enhances toughness, and an excellent toughness value of 200 J, representing 95.3% of the basal metal (BM), was achieved in the NZ at LHI. The primary reason for this improvement is the refinement of effective grains and M-A constituents resulting from reduced heat input. During crack propagation, the high proportion of effective grain boundaries and fine M-A constituents acts as a barrier, arresting and deflecting cracks and thereby enhancing toughness.


  • Open Access

    Enhancing Strength and Ductility in the Nugget Zone of Friction Stir Welded X80 Pipeline Steel via Applying Cooling Medium

    by Ruihai Duan, Guangming Xie, Xiaonan Qi, Zhaojie Wang, Shujin Chen, Ying Dong

    Fusion welding easily causes microstructural coarsening and tempering softening in the heat-affected zone (HAZ) of high-strength pipeline steel joints, which considerably deteriorates the strength and toughness. Here, X80 pipeline steel was subjected to friction stir welding (FSW), and external cooling was used to tailor the microstructure to optimize the strength–ductility combination of the nugget zone (NZ). Coarse granular bainite (GB) appeared at air cooling, whereas a fine ferrite/martensite microstructure was achieved at solid CO2 cooling. The highest ratio of high-angle boundaries was obtained at solid CO2 cooling because the variants were evenly distributed within the four close-packed (CP) groups. The low yield strength (YS) of 595 MPa was obtained in the NZ under air cooling, whereas a high YS of 755 MPa was achieved in the NZ under solid CO2 cooling due to dislocation strengthening and fine-grain strengthening. Furthermore, an ultra-high tensile strength of 910 MPa and utilizable elongation of 15% were obtained in the NZ under solid CO2 cooling, which was attributed to the fine effective grains and ferrite/martensite microstructure facilitating a ductile fracture.