MRMitchell J. Rogers

Mitchell J. Rogers

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mitchell J. Rogers has a total of 81 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Comment on egusphere-2026-4542

    by Jenna DeVivo, Alexandria Stinchfield, Nirvan Bhattacharyya, Mitch Alton, Mingyi Wang, Siegfried Schobesberger, Liqing Hao, Mitchell Rogers, Alexander Vogel, Imad Zgheib, et al.

    Here, we present measurements of inorganic and organic particles using a novel instrument that simultaneously measures both acid and base compounds via temperature-programmed desorption: a Filter Inlet for Gases and AEROsols (FIGAERO) combined with a Bipolar Time-of-Flight (BTOF) mass spectrometer. We measured particles from three different sources: atomized salt solutions, aerosols formed in the CERN CLOUD chamber, and ambient aerosols from a site in New York. We find that acids and bases do not desorb at temperatures characteristic of the volatilities of their pure compounds, but rather they desorb at higher temperatures that depend on particle composition related to the entropy of the ionic condensed state, i.e. the lattice energy. For monoprotic acids, the desorption is rate-limited by a proton transfer reaction, evidenced by simultaneous desorption of the neutral acid-base pair. For ammonium sulfate ((NH4)2SO4), we observe a step-wise release of ammonia and increase of the sulfate-to-ammonia ratio: first to triammonium sulfate hydrogen sulfate ((NH4)3H(SO4)2; letovicite), and then to ammonium hydrogen sulfate ((NH4)HSO4)). We find that organic acids and alkyl organosulfates also desorb at temperatures higher than those expected for their pure compounds, indicating reactive uptake. This suggests that a large fraction of organic compounds in particles may be light, ionic species, rather than fragments of low-volatility oligomers. Our studies show that the FIGAERO-BTOF is a highly sensitive and versatile instrument for elucidating condensed-phase aerosol chemistry.

  • Open Access

    Acid-base chemistry controls the thermal desorption of vapors from inorganic and organic nanoparticles

    by Jenna DeVivo, Alexandria Stinchfield, Nirvan Bhattacharyya, Mitch Alton, Mingyi Wang, Siegfried Schobesberger, Liqing Hao, Mitchell Rogers, Alexander Vogel, Imad Zgheib, et al.

    Here, we present measurements of inorganic and organic particles using a novel instrument that simultaneously measures both acid and base compounds via temperature-programmed desorption: a Filter Inlet for Gases and AEROsols (FIGAERO) combined with a Bipolar Time-of-Flight (BTOF) mass spectrometer. We measured particles from three different sources: atomized salt solutions, aerosols formed in the CERN CLOUD chamber, and ambient aerosols from a site in New York. We find that acids and bases do not desorb at temperatures characteristic of the volatilities of their pure compounds, but rather they desorb at higher temperatures that depend on particle composition related to the entropy of the ionic condensed state, i.e. the lattice energy. For monoprotic acids, the desorption is rate-limited by a proton transfer reaction, evidenced by simultaneous desorption of the neutral acid-base pair. For ammonium sulfate ((NH4)2SO4), we observe a step-wise release of ammonia and increase of the sulfate-to-ammonia ratio: first to triammonium sulfate hydrogen sulfate ((NH4)3H(SO4)2; letovicite), and then to ammonium hydrogen sulfate ((NH4)HSO4)). We find that organic acids and alkyl organosulfates also desorb at temperatures higher than those expected for their pure compounds, indicating reactive uptake. This suggests that a large fraction of organic compounds in particles may be light, ionic species, rather than fragments of low-volatility oligomers. Our studies show that the FIGAERO-BTOF is a highly sensitive and versatile instrument for elucidating condensed-phase aerosol chemistry.

  • Open Access

    Multiphase and Heterogeneous O 3 Chemistry on Aerosol and Infrastructural Surfaces Drives Cl 2 Sources in a Coastal City

    by Katelyn L. Richard, Michael P. Vermeuel, Emily Franklin, Rose K. Rossell, Adam De Groodt, Trey A. Maddaleno, Andrew Hallward‐Driemeier, Yuwei Zhao, Mitchell J. Rogers, Drew R. Gentner, et al.

    Molecular chlorine (Cl 2 ) is a key source of chlorine atoms (Cl∙) in the atmosphere, which can alter local oxidation chemistry and enhance both ozone (O 3 ) and particulate matter. While Cl 2 levels in some coastal cities can be substantial and are enhanced by particulate nitrate, the presence and impact of Cl 2 in US cities is poorly understood. In summer 2023, we measured gas phase Cl 2 mixing ratios (4 and 32.5 m above ground level, a.g.l) and fluxes (32.5 m a.g.l) in Mineola, New York. Cl 2 mixing ratios and fluxes consistently peaked during the afternoon, with averages (± standard deviation) of 24 ± 10 ppt and 170 ± 100 ppt·cm·s −1 , respectively, at 32.5 m from 12 to 4 p.m. local time. Strong correlations between Cl 2 emissions, solar radiation, hypochlorous acid, and O 3 suggest photochemical multiphase chemistry is a prominent source of Cl 2 to the region. Positive fluxes indicate emission of Cl 2 from the surface to the atmosphere and are consistent with sources exceeding the expected multiphase production rate of Cl 2 on aerosol surfaces. We hypothesize that rooftops, fences, roads and other urban surfaces act as reservoirs for chloride (Cl − ) from deteriorating building materials, industrial processes, and dry deposition of sea spray particles and chlorine‐containing gases, enabling heterogeneous formation of gas phase Cl 2 upon interaction with atmospheric pollutants such as O 3 . Deterioration of building materials may also enable surface chemistry that could impact urban chlorine chemistry, even in areas without strong coastal sea spray influence.

  • Open Access

    Observational constraints uncover the extensive contributions of biomass burning to organic particulate matter

    by Mitchell J. Rogers, Taekyu Joo, David M. Lunderberg, Sina Tayyebi Nia, Dexter Resta, Tori Hass-Mitchell, Lijin Zhang, Ziheng Zeng, Theobard Habineza, Abhishek Anand, et al.

    Understanding the impact of biomass burning, including wildfires, on air quality requires accurate quantification of associated surface-level pollution, which is often underpredicted due to chemical aging and variable confounding sources. Using methodology that incorporates decades of aerosol spectroscopy and isolates biomass burning across wood combustion types and fire sizes, we find that biomass burning contributes over 40% of organic 5 particulate matter across a majority of 43 measurement sites in the Northeastern U.S. We differentiate substantial contributions from wildfires, prescribed burns, and other anthropogenic activities, while finding that half of smoke originates from minor events that often go undetected. With biomass burning comprising an increasing fraction of pollution, transferable approaches to routinely estimate its impacts are critical to informing science and policy in a changing world.

  • Open Access

    Sources and aging of individual atmospheric particles in New York City: Integrating novel functional group data from optical photothermal spectroscopy with elemental and mass spectrometry data

    by Yao Xiao, Emily J. Costa, Xu He, Mitchell J. Rogers, Jessica A. Mirrielees, Tori N. Hass-Mitchell, Taekyu Joo, Benjamin A. Nault, Drew R. Gentner, Rachel E. O’BRien, et al.

    Elevated concentrations of fine particulate matter (PM2.5, particles < 2.5 μm) lead to negative health outcomes in urban areas, such as New York City (NYC). The sources of particles contributing to PM2.5 in NYC are variable and complex due to the range of primary anthropogenic and biogenic emissions, as well as secondary aerosol formation (i.e., aging) from gaseous precursors. To improve understanding of the contributors to PM2.5, single particle microspectroscopy uses chemical fingerprints to identify sources and the extent of aging, but few studies have integrated multiple microspectroscopy methods to understand PM2.5 in NYC. Herein, we focus on a recently-developed form of microspectroscopy that can measure atmospherically-sized particles (>~0.8 μm), optical photothermal infrared (O-PTIR). We compare O-PTIR to existing microspectroscopy methods [Raman, fluorescence, and energy dispersive X-ray (EDX)] to study sources and aging of the complex NYC aerosol based on functional group and elemental information, which we also relate to bulk mass spectrometry methods. Single particle data shows submicron aerosol composition dominated by carbonaceous particles that fluoresce mixed with ammonium and sulfate, with a range of oxidized organic functional groups observed. At larger sizes, more primary sources (salts, dust, and biological) were observed, with nitrate being the dominant secondary anion. Collectively, the results from OPTIR and other instruments across case-study days reveal variations in sources and aging, with greater variability at larger diameters. Demonstrating the potential of O-PTIR when combined with the other methods to provide data that is important for improving air quality in urban megacities.


  • Open Access

    Techno-economic assessment of distributed wellhead RO water treatment for nitrate removal and salinity reduction: A field study in small disadvantaged communities

    by Yoram Cohen, Maria Soto, Nora Marki, Yakubu A. Jarma, Madelyn Glickfeld, Mitchell Rogers, Kenny Yip, Phoebe Strauss, Christian Aguilar, Bilal Khan, et al.


  • Open Access

    Humid Summers Promote Urban Aqueous‐Phase Production of Oxygenated Organic Aerosol in the Northeastern United States

    by Mitchell J. Rogers, Taekyu Joo, Tori Hass‐Mitchell, Manjula R. Canagaratna, Pedro Campuzano‐Jost, Donna Sueper, Mia N. Tran, Jo E. Machesky, Joseph R. Roscioli, Jose L. Jimenez, et al.

    Aqueous‐phase uptake and processing of water‐soluble organic compounds can promote secondary organic aerosol (SOA) production. We evaluated the contributions of aqueous‐phase chemistry to summertime urban SOA at two sites in New York City. The relative role of aqueous‐phase processing varied with chemical and environmental conditions, with evident daytime SOA enhancements (e.g., >1 μg/m 3 ) during periods with relative humidities (RH) exceeding 65% and often higher temperatures. Oxygenated organic aerosol (OOA) production was also sensitive to secondary inorganic aerosols, in part through their influence on aerosol liquid water. On average, high‐RH periods exhibited a 69% increase in less‐oxidized OOA production in Queens, NY. These enhancements coincided with southerly backward trajectories and greater inorganic aerosol concentrations, yet showed substantial intra‐city variability between Queens and Manhattan. The observed aqueous‐phase SOA production, even with historically low sulfate and nitrate aerosol loadings, highlights both opportunities and challenges for continued reductions in summertime PM 2.5 in urban communities.