Boyi Xu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Boyi Xu has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
Fei Yang
State Key Laboratory of Robotics and System, School of Mechatronics Engineering
3 shared publicationsFeihu Song
Shien-Ming Wu School of Intelligent Engineering
3 shared publicationsJiaqiao Liang
Shien-Ming Wu School of Intelligent Engineering
3 shared publicationsJinsui Xu
State Key Laboratory of Robotics and System, School of Mechatronics Engineering
3 shared publicationsYitong Zhou
Shien-Ming Wu School of Intelligent Engineering
3 shared publications- Yitong Zhou
Shien-Ming Wu School of Intelligent Engineering, South China University of Technology of Guangzhou, Guangzhou, China
3 shared publications
Latest Publications
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (7) , 8760-8767
A Soft Worm Robot for Sub-Centimeter Scale Pipeline Inspection
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (7) , 8760-8767
A Soft Worm Robot for Sub-Centimeter Scale Pipeline Inspection
- 11 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (3) , 3629-3636
Automated High-Precision Control of Twisted and Coiled Polymers Under Parameter Variability
Twisted and coiled polymer (TCP) artificial muscles offer high energy density and large deformation, but achieving reliable closed-loop control remains difficult due to time-temperature-dependent parameter drift, structural variability, and labor-intensive control parameter tuning, which accelerate actuator wear through repeated adjustments. This work proposes an automated two-stage IGAPSO (improved genetic particle swarm optimization)-based framework that integrates neural-network-assisted offline optimization with rapid online fine-tuning on physical actuators, minimizing manual calibration while ensuring robust performance. Experiments demonstrate rapid and precise tuning of TCP control parameters: in step force control, convergence occurs within eight iterations with a 0.14 s settling time and 0.02% steady-state error; in step displacement control, tuning completes in three iterations with a 0.55 s settling time and 0.14% error. Zero-overshoot responses are realized by adjusting the optimization objective. The method further achieves robust waveform tracking (mean RMSEs of 1.90 mN force and 0.47 mm displacement), enables secondary retuning after long-term placement within seven iterations, and transfers effectively to TCPs with different spring indices. This work provides an efficient and generalizable strategy for accurate, robust, and adaptive TCP control, paving the way for broader integration in robotic systems.
- 11 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (3) , 3629-3636
Automated High-Precision Control of Twisted and Coiled Polymers Under Parameter Variability
Twisted and coiled polymer (TCP) artificial muscles offer high energy density and large deformation, but achieving reliable closed-loop control remains difficult due to time-temperature-dependent parameter drift, structural variability, and labor-intensive control parameter tuning, which accelerate actuator wear through repeated adjustments. This work proposes an automated two-stage IGAPSO (improved genetic particle swarm optimization)-based framework that integrates neural-network-assisted offline optimization with rapid online fine-tuning on physical actuators, minimizing manual calibration while ensuring robust performance. Experiments demonstrate rapid and precise tuning of TCP control parameters: in step force control, convergence occurs within eight iterations with a 0.14 s settling time and 0.02% steady-state error; in step displacement control, tuning completes in three iterations with a 0.55 s settling time and 0.14% error. Zero-overshoot responses are realized by adjusting the optimization objective. The method further achieves robust waveform tracking (mean RMSEs of 1.90 mN force and 0.47 mm displacement), enables secondary retuning after long-term placement within seven iterations, and transfers effectively to TCPs with different spring indices. This work provides an efficient and generalizable strategy for accurate, robust, and adaptive TCP control, paving the way for broader integration in robotic systems.
- 9 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (51) , 70059-70070
Programmable Helical Hierarchy in Coiled Polymer Artificial Muscles
Simultaneously achieving a large stroke, high payload capacity, and structural programmability in coiled polymer muscles remains challenging due to intrinsic structural and fabrication constraints. Here, we present a multilevel helical fabrication scheme that enables stable, large initial coil pitches and programmable helical hierarchies and chirality within a single polymer fiber, effectively bridging the stroke-payload trade-off and greatly expanding the design space for polymer artificial muscles. Second-order muscles demonstrate superior actuation performance: homochiral muscles achieve a contractile stroke of 88.1% and exhibit a 9-fold increase in payload over first-order muscles at 50% contraction (3.6 vs 0.4 MPa), while heterochiral muscles reach an elongation stroke of 860.7%. Third-order muscles transcend the traditional binary homochiral-heterochiral classification, enabling four chirality combinations with unique actuation modes. A regionally controlled twist-fabrication method allows spatial encoding of the hierarchy and chirality within a single fiber, enabling multifunctional and localized actuation. This programmability is demonstrated in soft and biomimetic robots: a robotic arm driven by a single muscle encoding both flexor and extensor functions, a worm-like robot actuated by regionally inverted chirality within one muscle, and a biomimetic finger combining mixed helical levels to achieve faster and more adaptable wrapping motions.
- 9 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (51) , 70059-70070
Programmable Helical Hierarchy in Coiled Polymer Artificial Muscles
Simultaneously achieving a large stroke, high payload capacity, and structural programmability in coiled polymer muscles remains challenging due to intrinsic structural and fabrication constraints. Here, we present a multilevel helical fabrication scheme that enables stable, large initial coil pitches and programmable helical hierarchies and chirality within a single polymer fiber, effectively bridging the stroke-payload trade-off and greatly expanding the design space for polymer artificial muscles. Second-order muscles demonstrate superior actuation performance: homochiral muscles achieve a contractile stroke of 88.1% and exhibit a 9-fold increase in payload over first-order muscles at 50% contraction (3.6 vs 0.4 MPa), while heterochiral muscles reach an elongation stroke of 860.7%. Third-order muscles transcend the traditional binary homochiral-heterochiral classification, enabling four chirality combinations with unique actuation modes. A regionally controlled twist-fabrication method allows spatial encoding of the hierarchy and chirality within a single fiber, enabling multifunctional and localized actuation. This programmability is demonstrated in soft and biomimetic robots: a robotic arm driven by a single muscle encoding both flexor and extensor functions, a worm-like robot actuated by regionally inverted chirality within one muscle, and a biomimetic finger combining mixed helical levels to achieve faster and more adaptable wrapping motions.
- 28 March 2025
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 10 (4) , 3134-3142
Spider-Inspired Ion Gel Sensor for Dual-Mode Detection of Force and Speed via Magnetic Induction
In the field of flexible sensors, the development of multifunctional, highly sensitive, wide detection range, and excellent durability sensors remains a significant challenge. This paper designs and fabricates a dual-mode ion gel sensor based on the spider's sensing mechanism, integrating both wind speed and pressure detection. The wind speed sensor employs magnetic fiber flocking and inductive resonance principles, providing accurate detection within a wind speed range of 2 to 11.5 m/s, with good linear response and high sensitivity. The impedance signal exhibits a maximum variation of 6.89 times. The pressure sensor, combining microstructured ion gel and capacitive design, demonstrates high sensitivity (15.93 kPa-1) and excellent linear response within a pressure range of 0.5 Pa to 40 kPa, with strong adaptability and good stability. The sensor shows outstanding performance in human motion monitoring, accurately capturing physiological signals such as joint movements and respiratory frequency, offering robust support for motion health management. Furthermore, combined with deep learning algorithms, the sensor achieves an accuracy of 96.83% in an intelligent motion recognition system, effectively enhancing the precision of motion performance analysis. This study provides a new solution for flexible motion monitoring and health management systems, with broad application prospects.
- 28 March 2025
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 10 (4) , 3134-3142
Spider-Inspired Ion Gel Sensor for Dual-Mode Detection of Force and Speed via Magnetic Induction
In the field of flexible sensors, the development of multifunctional, highly sensitive, wide detection range, and excellent durability sensors remains a significant challenge. This paper designs and fabricates a dual-mode ion gel sensor based on the spider's sensing mechanism, integrating both wind speed and pressure detection. The wind speed sensor employs magnetic fiber flocking and inductive resonance principles, providing accurate detection within a wind speed range of 2 to 11.5 m/s, with good linear response and high sensitivity. The impedance signal exhibits a maximum variation of 6.89 times. The pressure sensor, combining microstructured ion gel and capacitive design, demonstrates high sensitivity (15.93 kPa-1) and excellent linear response within a pressure range of 0.5 Pa to 40 kPa, with strong adaptability and good stability. The sensor shows outstanding performance in human motion monitoring, accurately capturing physiological signals such as joint movements and respiratory frequency, offering robust support for motion health management. Furthermore, combined with deep learning algorithms, the sensor achieves an accuracy of 96.83% in an intelligent motion recognition system, effectively enhancing the precision of motion performance analysis. This study provides a new solution for flexible motion monitoring and health management systems, with broad application prospects.
- 27 February 2025
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 10 (3) , 2319-2329
Ant-Inspired Ion Gel Sensor for Dual-Mode Detection of Force and Humidity via Magnetic Induction
In the realm of intelligent sensing, the development of multifunctional, highly sensitive, wide-ranging, and durable flexible sensors remains a formidable challenge. This paper introduces a dual-mode ionic gel sensor, inspired by the sensory mechanisms of ants and developed through magnetically induced technology capable of simultaneously detecting environmental humidity and pressure. The humidity sensor is fabricated from a prestretched, buckled poly(vinyl alcohol) (PVA) ionic gel with microstructures, exhibiting rapid response and high durability. The voltage signal of the humidity sensor decreases linearly with increasing relative humidity (RH). The pressure sensor employs a capacitive structure, integrating magnetically induced fiber pilose structures with ionic gel, achieving a high sensitivity of 7.375 kPa-1 and an excellent linear response over a broad pressure range from 0.5 Pa to 95 kPa. In the context of human motion monitoring, the sensor accurately captures physiological signals, such as pulse beats and joint movements while concurrently detecting skin humidity. Additionally, by leveraging deep learning algorithms, the sensor attains a remarkable 99.21% accuracy in object recognition within flexible intelligent sorting systems, underscoring its potential in smart logistics sorting applications. This study transcends the traditional limitations of capacitive pressure sensors regarding sensitivity and detection range, offering novel solutions for applications in motion monitoring and intelligent logistics sorting.
- 27 February 2025
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 10 (3) , 2319-2329
Ant-Inspired Ion Gel Sensor for Dual-Mode Detection of Force and Humidity via Magnetic Induction
In the realm of intelligent sensing, the development of multifunctional, highly sensitive, wide-ranging, and durable flexible sensors remains a formidable challenge. This paper introduces a dual-mode ionic gel sensor, inspired by the sensory mechanisms of ants and developed through magnetically induced technology capable of simultaneously detecting environmental humidity and pressure. The humidity sensor is fabricated from a prestretched, buckled poly(vinyl alcohol) (PVA) ionic gel with microstructures, exhibiting rapid response and high durability. The voltage signal of the humidity sensor decreases linearly with increasing relative humidity (RH). The pressure sensor employs a capacitive structure, integrating magnetically induced fiber pilose structures with ionic gel, achieving a high sensitivity of 7.375 kPa-1 and an excellent linear response over a broad pressure range from 0.5 Pa to 95 kPa. In the context of human motion monitoring, the sensor accurately captures physiological signals, such as pulse beats and joint movements while concurrently detecting skin humidity. Additionally, by leveraging deep learning algorithms, the sensor attains a remarkable 99.21% accuracy in object recognition within flexible intelligent sorting systems, underscoring its potential in smart logistics sorting applications. This study transcends the traditional limitations of capacitive pressure sensors regarding sensitivity and detection range, offering novel solutions for applications in motion monitoring and intelligent logistics sorting.
- 23 February 2025
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 7 (5) , 2137-2145
Bionic Muscle with Dual-Mode Sensing Function Inspired by Plant Tendrils
- 23 February 2025
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 7 (5) , 2137-2145
Bionic Muscle with Dual-Mode Sensing Function Inspired by Plant Tendrils
- 13 February 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (8) , 12720-12730
Ion Gel Pressure Sensor with High Sensitivity and a Wide Linear Range Enabled by Magnetically Induced Gradient Microstructures
In the field of intelligent sensing, a major challenge pertains to the development of capacitive pressure sensors that can precisely detect minute pressure changes and simultaneously exhibit a wide linear range and high sensitivity. This paper develops a novel capacitive pressure sensor inspired by the gradient microstructure of tree frog toe pads, which is suitable for various applications including texture recognition, motion monitoring, and object grasping recognition. The sensor employs magnetic induction technology to precisely control the gradient microstructure morphology and combines it with ionic gel and conductive nanomaterials. These features enable it to not only detect minute pressures as low as 0.5 Pa but also maintain a high sensitivity of 1.51 kPa-1 and excellent linear response characteristics across a wide pressure range of up to 93.5 kPa. It can accurately capture pulse beats and motion signals, making it suitable for use in human health monitoring. Furthermore, by utilizing the deep learning algorithms, it achieves a 97.39% object recognition accuracy rate in flexible intelligent sorting systems. This work provides a new solution in application fields such as health monitoring and intelligent logistics sorting.
- 13 February 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (8) , 12720-12730
Ion Gel Pressure Sensor with High Sensitivity and a Wide Linear Range Enabled by Magnetically Induced Gradient Microstructures
In the field of intelligent sensing, a major challenge pertains to the development of capacitive pressure sensors that can precisely detect minute pressure changes and simultaneously exhibit a wide linear range and high sensitivity. This paper develops a novel capacitive pressure sensor inspired by the gradient microstructure of tree frog toe pads, which is suitable for various applications including texture recognition, motion monitoring, and object grasping recognition. The sensor employs magnetic induction technology to precisely control the gradient microstructure morphology and combines it with ionic gel and conductive nanomaterials. These features enable it to not only detect minute pressures as low as 0.5 Pa but also maintain a high sensitivity of 1.51 kPa-1 and excellent linear response characteristics across a wide pressure range of up to 93.5 kPa. It can accurately capture pulse beats and motion signals, making it suitable for use in human health monitoring. Furthermore, by utilizing the deep learning algorithms, it achieves a 97.39% object recognition accuracy rate in flexible intelligent sorting systems. This work provides a new solution in application fields such as health monitoring and intelligent logistics sorting.