Zhen Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Zhen Chen has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Xiangdong Liu
Beijing Institute of Technology
3 shared publications Hong Lang
The Key Laboratory of Road and Traffic Engineering, Ministry of Education, Tongji University
2 shared publications- Hong-Wei Wang
Institute of High Performance Computing (IHPC), Agency for Science, Technology and Research (A*STAR), 1 Fusionopolis Way, Singapore 138632, Singapore
2 shared publications Yichuan Peng
The Key Laboratory of Road and Traffic Engineering, Ministry of Education, Tongji University
2 shared publications- Yingying Xing
Tongji Univ
2 shared publications Aidi Wang
The Key Laboratory of Road and Traffic Engineering, Ministry of Education, Tongji University
1 shared publication
Latest Publications
- 24 February 2026
- Published by Elsevier in Advanced Engineering Informatics
- Vol. 72
Aviation accident report causality extraction based on transformer with BERT-embeddings
- 24 February 2026
- Published by Elsevier in Advanced Engineering Informatics
- Vol. 72
Aviation accident report causality extraction based on transformer with BERT-embeddings
- 24 October 2025
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 26 (1)
Automated image-level pavement type recognition on cross-regional data using a multi-feature fusion network
- 24 October 2025
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 26 (1)
Automated image-level pavement type recognition on cross-regional data using a multi-feature fusion network
- Open Access
- 5 September 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (17) , 9777
A Deep Reinforcement Learning Framework for Multi-Fleet Scheduling and Optimization of Hybrid Ground Support Equipment Vehicles in Airport Operations
The increasing electrification of Ground Support Equipment (GSE) vehicles promotes sustainable airport operations but introduces new challenges in task scheduling, energy management, and hybrid fleet coordination. To address these issues, we develop an end-to-end Deep Reinforcement Learning (DRL) framework and evaluate it under three representative deployment scenarios with 30%, 50%, and 80% electric fleet proportions through case studies at Singapore’s Changi Airport. Experimental results show that the proposed approach outperforms baseline models, achieves more balanced state-of-charge (SoC) distributions, reduces overall carbon emissions, and improves real-time responsiveness under operational constraints. Beyond these results, this work contributes a unified DRL-based scheduling paradigm that integrates electric and fuel-powered vehicles, adapts Proximal Policy Optimization (PPO) to heterogeneous fleet compositions, and provides interpretable insights through Gantt chart visualizations. These findings demonstrate the potential of DRL as a scalable and robust solution for smart airport logistics.
- 5 September 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (17) , 9777
Open AccessA Deep Reinforcement Learning Framework for Multi-Fleet Scheduling and Optimization of Hybrid Ground Support Equipment Vehicles in Airport Operations
The increasing electrification of Ground Support Equipment (GSE) vehicles promotes sustainable airport operations but introduces new challenges in task scheduling, energy management, and hybrid fleet coordination. To address these issues, we develop an end-to-end Deep Reinforcement Learning (DRL) framework and evaluate it under three representative deployment scenarios with 30%, 50%, and 80% electric fleet proportions through case studies at Singapore’s Changi Airport. Experimental results show that the proposed approach outperforms baseline models, achieves more balanced state-of-charge (SoC) distributions, reduces overall carbon emissions, and improves real-time responsiveness under operational constraints. Beyond these results, this work contributes a unified DRL-based scheduling paradigm that integrates electric and fuel-powered vehicles, adapts Proximal Policy Optimization (PPO) to heterogeneous fleet compositions, and provides interpretable insights through Gantt chart visualizations. These findings demonstrate the potential of DRL as a scalable and robust solution for smart airport logistics.
- Open Access
- 5 July 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (13) , 7888
Automated Bridgehead Settlement Detection on the Non-Staggered-Step Structures Based on Settlement Point Ratio Model
The bridgehead settlement problem continues to be one of the most chronic issues affecting long-term bridge performance. In addition, the magnitude of non-staggered-step settlement across the bridge approach transition has not been quantified. Non-contact measurement is considered an alternative to manual inspection, enabling automated damage evaluation for structural maintenance. This paper proposes an inexpensive automatic system using an inertial navigation sensor and a line scanning camera to evaluate the non-staggered-step bridgehead settlement with acceptable accuracy. By analyzing road longitudinal slope data, driving distance, and pavement images, this paper established a calculation model and algorithm of non-staggered-step bridgehead settlement, in which case, a new calculation index named the settlement point ratio (SPR) was proposed. Moreover, the effect of the vehicular detection system and the distance gradient tested at three speeds were measured. The results illustrate that the system has a good performance in longitudinal slope data with an absolute error of less than 1.5%. In addition, 31 bridges in China, Ningbo city, were selected. Combined with the test data, 50 groups of SPR were output using the established model and algorithm. By validating the system’s output with the standard measurement method, correlation, and regression analysis were carried out in order to verify the SPR model’s reliability. The correlation coefficient is 0.934, and the determination coefficient of the regression model is 0.872, which confirms its capability for accurate data collection and settlement measurement. Therefore, the proposed method is scientific and reasonable for detecting and quantifying non-staggered-step bridgehead settlement, effectively completing the research blank of bridgehead settlement detection.
- 5 July 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (13) , 7888
Open AccessAutomated Bridgehead Settlement Detection on the Non-Staggered-Step Structures Based on Settlement Point Ratio Model
The bridgehead settlement problem continues to be one of the most chronic issues affecting long-term bridge performance. In addition, the magnitude of non-staggered-step settlement across the bridge approach transition has not been quantified. Non-contact measurement is considered an alternative to manual inspection, enabling automated damage evaluation for structural maintenance. This paper proposes an inexpensive automatic system using an inertial navigation sensor and a line scanning camera to evaluate the non-staggered-step bridgehead settlement with acceptable accuracy. By analyzing road longitudinal slope data, driving distance, and pavement images, this paper established a calculation model and algorithm of non-staggered-step bridgehead settlement, in which case, a new calculation index named the settlement point ratio (SPR) was proposed. Moreover, the effect of the vehicular detection system and the distance gradient tested at three speeds were measured. The results illustrate that the system has a good performance in longitudinal slope data with an absolute error of less than 1.5%. In addition, 31 bridges in China, Ningbo city, were selected. Combined with the test data, 50 groups of SPR were output using the established model and algorithm. By validating the system’s output with the standard measurement method, correlation, and regression analysis were carried out in order to verify the SPR model’s reliability. The correlation coefficient is 0.934, and the determination coefficient of the regression model is 0.872, which confirms its capability for accurate data collection and settlement measurement. Therefore, the proposed method is scientific and reasonable for detecting and quantifying non-staggered-step bridgehead settlement, effectively completing the research blank of bridgehead settlement detection.
- 2 December 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 50 (11) , 1-4
Research on the Torque Ripple and Scanning Range of an Arc-Structure PMSM Used for Scanning System
A kind of arc-structure permanent-magnet synchronous machine (AS-PMSM) used for scanning system, which requires high positioning accuracy, high response performance, and wide scanning range, is proposed and researched in this paper. The AS-PMSM is able to replace the traditional rotary motor plus gear box to realize the directly driving and limited angular movement. To ensure the high positioning accuracy and high response performance, the torque characteristics are researched. A new method is proposed to detach the torque Tslot caused by slotting and the end torque Tend caused by stator end effect for AS-PMSM. Considering the large torque Tend, the average torque and especially torque ripple are optimized from the aspects of stator central angle and permanent-magnet (PM) shape. Furthermore, the edge PM mounted on the end of the rotor is optimized by adopting asymmetry shape to improve the smooth scanning range. After all the optimization, the smooth scanning range with a satisfying torque ripple limited in 3% is much increased by 19.5%.
- 2 December 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 50 (11) , 1-4
Research on the Torque Ripple and Scanning Range of an Arc-Structure PMSM Used for Scanning System
A kind of arc-structure permanent-magnet synchronous machine (AS-PMSM) used for scanning system, which requires high positioning accuracy, high response performance, and wide scanning range, is proposed and researched in this paper. The AS-PMSM is able to replace the traditional rotary motor plus gear box to realize the directly driving and limited angular movement. To ensure the high positioning accuracy and high response performance, the torque characteristics are researched. A new method is proposed to detach the torque Tslot caused by slotting and the end torque Tend caused by stator end effect for AS-PMSM. Considering the large torque Tend, the average torque and especially torque ripple are optimized from the aspects of stator central angle and permanent-magnet (PM) shape. Furthermore, the edge PM mounted on the end of the rotor is optimized by adopting asymmetry shape to improve the smooth scanning range. After all the optimization, the smooth scanning range with a satisfying torque ripple limited in 3% is much increased by 19.5%.
- 1 January 2013
- Published by Elsevier in Sensors and Actuators A: Physical
- Vol. 189, 420-428
Modeling of hysteresis in piezoelectric actuator based on adaptive filter
- 1 January 2013
- Published by Elsevier in Sensors and Actuators A: Physical
- Vol. 189, 420-428
Modeling of hysteresis in piezoelectric actuator based on adaptive filter