Zixu Dong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zixu Dong has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Kwok Tong Chau
The Hong Kong Polytechnic University
5 shared publications - Mingyuan Jiang
The Hong Kong Polytechnic University
5 shared publications - Shuangxia Niu
The Hong Kong Polytechnic University
5 shared publications Zhouyang Zhang
The Hong Kong Polytechnic University
3 shared publicationsZhang Zhang
The Hong Kong Polytechnic University
2 shared publicationsDuo Zhang
The Hong Kong Polytechnic University
1 shared publication
Latest Publications
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 62 (10) , 8600605
Decoupled Current-Transformation Control Design for a Dual-Rotor PMSM Drive With Integrated Winding
Conventional dual-electrical-port dual-mechanical-port permanent magnet synchronous machine design with two separate stator windings with different pole pairs, increases structural complexity, losses, and electromagnetic coupling. The integrated winding instead superimposes current components with different pole-pair numbers in a single winding, forming two independently controllable magnetomotive force (MMF) distributions and a more compact topology. However, control algorithm for integrated winding machines is still limited. This paper presents a control system design for a dual-rotor permanent magnet synchronous motor (DRPMSM) with integrated winding. Using a linear transformation between equivalent separated winding currents and integrated winding currents, a decoupled control structure is built with individual speed loops for each rotor and two inner current control loops, enabling independent control of both rotors. Experimental results and simulations confirm good tracking performance and effective decoupling between the two rotors, indicating the feasibility of the proposed approach for dual-rotor integrated winding drive systems.
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 62 (10) , 8600605
Decoupled Current-Transformation Control Design for a Dual-Rotor PMSM Drive With Integrated Winding
Conventional dual-electrical-port dual-mechanical-port permanent magnet synchronous machine design with two separate stator windings with different pole pairs, increases structural complexity, losses, and electromagnetic coupling. The integrated winding instead superimposes current components with different pole-pair numbers in a single winding, forming two independently controllable magnetomotive force (MMF) distributions and a more compact topology. However, control algorithm for integrated winding machines is still limited. This paper presents a control system design for a dual-rotor permanent magnet synchronous motor (DRPMSM) with integrated winding. Using a linear transformation between equivalent separated winding currents and integrated winding currents, a decoupled control structure is built with individual speed loops for each rotor and two inner current control loops, enabling independent control of both rotors. Experimental results and simulations confirm good tracking performance and effective decoupling between the two rotors, indicating the feasibility of the proposed approach for dual-rotor integrated winding drive systems.
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 62 (10) , 8202905
Design of a Dual-Rotor Dual-Flux-Switching Motor
Permanent magnet (PM) machines play a pivotal role in modern electromechanical systems due to the superior power density and reliability. However, traditional single-rotor topologies struggle to meet the demands of complex applications requiring multi-degree-of-freedom control. Dual-rotor machines enable independent control of dual-rotation systems while expanding the speed range. This paper proposes a novel dual-rotor dual flux-switching permanent magnet motor. The key is to adopt simple FS structures for both inner and outer rotors, incorporates concentrated windings and inter-slot tangential PMs, hence achieving effective magnetic circuit segmentation to suppress torque ripple. Finite Element Method (FEM) analysis confirms that the structure exhibits high torque density, robust mechanical integrity, and low torque ripple. Furthermore, multi-objective optimization via a genetic algorithm is implemented to further improve the system's torque density, providing an innovative solution for high performance applications under complex operating conditions.
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 62 (10) , 8202905
Design of a Dual-Rotor Dual-Flux-Switching Motor
Permanent magnet (PM) machines play a pivotal role in modern electromechanical systems due to the superior power density and reliability. However, traditional single-rotor topologies struggle to meet the demands of complex applications requiring multi-degree-of-freedom control. Dual-rotor machines enable independent control of dual-rotation systems while expanding the speed range. This paper proposes a novel dual-rotor dual flux-switching permanent magnet motor. The key is to adopt simple FS structures for both inner and outer rotors, incorporates concentrated windings and inter-slot tangential PMs, hence achieving effective magnetic circuit segmentation to suppress torque ripple. Finite Element Method (FEM) analysis confirms that the structure exhibits high torque density, robust mechanical integrity, and low torque ripple. Furthermore, multi-objective optimization via a genetic algorithm is implemented to further improve the system's torque density, providing an innovative solution for high performance applications under complex operating conditions.
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 62 (10) , 8203105
Quantitative Comparison of Dual-Rotor High-Speed Motors With Different Spoke-Type Stator PMs
Traditional rotor permanent magnet (PM) dual-rotor motors can adapt to complex operating conditions, but are susceptible to PM detachment risks. To address this issue, this paper proposes a dual-rotor dual-flux-switching permanent magnet (DR-DFS-PM) motor with spoke-type stator PMs. The key is its dual-rotor design enables independent control and multi-degree-of-freedom motion, while the flux-switching topology optimizes the magnetic circuit via air-gap harmonic modulation, hence enhancing torque density, eliminating PM detachment risks, and suppressing eddy current losses. In order to conduct a comprehensive analysis and comparison, this paper presents two different topologies of PM structures. Comparative analysis of these two topological configurations using finite element method (FEM) simulations confirms that the configuration with PMs positioned between left and right slots demonstrates superior torque output and operational stability, which is still holds true even after further algorithm optimization.
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 62 (10) , 8203105
Quantitative Comparison of Dual-Rotor High-Speed Motors With Different Spoke-Type Stator PMs
Traditional rotor permanent magnet (PM) dual-rotor motors can adapt to complex operating conditions, but are susceptible to PM detachment risks. To address this issue, this paper proposes a dual-rotor dual-flux-switching permanent magnet (DR-DFS-PM) motor with spoke-type stator PMs. The key is its dual-rotor design enables independent control and multi-degree-of-freedom motion, while the flux-switching topology optimizes the magnetic circuit via air-gap harmonic modulation, hence enhancing torque density, eliminating PM detachment risks, and suppressing eddy current losses. In order to conduct a comprehensive analysis and comparison, this paper presents two different topologies of PM structures. Comparative analysis of these two topological configurations using finite element method (FEM) simulations confirms that the configuration with PMs positioned between left and right slots demonstrates superior torque output and operational stability, which is still holds true even after further algorithm optimization.
- 28 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 61 (9) , 1-11
Overview of Permanent Magnet Wind Power Generators
With the advancement of renewable energy technologies and the increasing emphasis on environmental issues, wind power generation systems have experienced rapid development. Permanent-magnet (PM) machines have been widely favored in the generator domain due to their high torque density, high reliability, and high efficiency. This article provides a detailed review of PM machines applied in wind power generation systems, categorizing the types of machines based on the number of mechanical and electrical ports (EPs). This article emphasizes the generator topologies, operational principles, and performance characteristics, while also comparing the advantages and disadvantages of different structures. Furthermore, this article discusses the current challenges faced by PM wind generators and outlines future development trends.
- 28 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 61 (9) , 1-11
Overview of Permanent Magnet Wind Power Generators
With the advancement of renewable energy technologies and the increasing emphasis on environmental issues, wind power generation systems have experienced rapid development. Permanent-magnet (PM) machines have been widely favored in the generator domain due to their high torque density, high reliability, and high efficiency. This article provides a detailed review of PM machines applied in wind power generation systems, categorizing the types of machines based on the number of mechanical and electrical ports (EPs). This article emphasizes the generator topologies, operational principles, and performance characteristics, while also comparing the advantages and disadvantages of different structures. Furthermore, this article discusses the current challenges faced by PM wind generators and outlines future development trends.
- 17 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 61 (9) , 1-5
Mechanical Flux-Weakening Design of the Bidirectional Flux-Modulated Radial Permanent Magnet Generator for Wind Power Generation
Wind power plays an important role in the transition to new energy sources. This article introduces a bidirectional flux-modulated radial permanent magnet (PM) generator, incorporating a mechanical flux-weakening design. The focus is on achieving mechanical flux-weakening effects through the principles of flux modulation while employing working harmonics to ascertain the appropriate winding pole pair number and sequence. This design facilitates the regulation of the induced back electromotive force (EMF) and enables a broad operational speed range for the variable speed constant amplitude voltage (VSCAV) mode of the wind power generator. Furthermore, the strategic selection of specific working harmonics permits the generator to operate with a singular set of windings. The topology is presented, and the operational principles are thoroughly analyzed. Ultimately, the structure is subjected to testing through algorithm optimization and finite element method (FEM).
- 17 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 61 (9) , 1-5
Mechanical Flux-Weakening Design of the Bidirectional Flux-Modulated Radial Permanent Magnet Generator for Wind Power Generation
Wind power plays an important role in the transition to new energy sources. This article introduces a bidirectional flux-modulated radial permanent magnet (PM) generator, incorporating a mechanical flux-weakening design. The focus is on achieving mechanical flux-weakening effects through the principles of flux modulation while employing working harmonics to ascertain the appropriate winding pole pair number and sequence. This design facilitates the regulation of the induced back electromotive force (EMF) and enables a broad operational speed range for the variable speed constant amplitude voltage (VSCAV) mode of the wind power generator. Furthermore, the strategic selection of specific working harmonics permits the generator to operate with a singular set of windings. The topology is presented, and the operational principles are thoroughly analyzed. Ultimately, the structure is subjected to testing through algorithm optimization and finite element method (FEM).