João Figueiredo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
João Figueiredo has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- José Martins
Technologies and Engineering School (EET), Instituto Politécnico da Lusofonia (IPLuso), 1700-098 Lisbon, Portugal
3 shared publications - Luis Miguel Pires
Technologies and Engineering School (EET), Instituto Politécnico da Lusofonia (IPLuso), 1700-098 Lisbon, Portugal
3 shared publications - Ricardo Martins
Technologies and Engineering School (EET), Instituto Politécnico da Lusofonia (IPLuso), 1700-098 Lisbon, Portugal
3 shared publications - João Nascimento
Technologies and Engineering School (EET), Instituto Politécnico da Lusofonia (IPLuso), 1700-098 Lisbon, Portugal
1 shared publication
Latest Publications
- Open Access
Design and Development of a Low-Power IoT System for Continuous Temperature Monitoring
This article presents the development of a compact, high-precision, and energy-efficient temperature monitoring system designed for tracking applications where continuous and accurate thermal monitoring is essential. Built around the HY0020 System-on-Chip (SoC), the system integrates two bandgap-based temperature sensors—one internal to the SoC and one external (Si7020-A20)—mounted on a custom PCB and powered by a coin cell battery. A distinctive feature of the system is its support for real-time parameterization of the internal sensor, which enables advanced capabilities such as thermal profiling, cross-validation, and onboard diagnostics. The system was evaluated under both room temperature and refrigeration conditions, demonstrating high accuracy with the internal sensor showing an average error of 0.041 °C and −0.36 °C, respectively, and absolute errors below ±0.5 °C. With an average current draw of just 0.01727 mA, the system achieves an estimated autonomy of 6.6 years on a 1000 mAh battery. Data are transmitted via Bluetooth Low Energy (BLE) to a Raspberry Pi 4 gateway and forwarded to an IoT cloud platform for remote access and analysis. With a total cost of approximately EUR 20 and built entirely from commercially available components, this system offers a scalable and cost-effective solution for a wide range of temperature-sensitive applications. Its combination of precision, long-term autonomy, and advanced diagnostic capabilities make it suitable for deployment in diverse fields such as supply chain monitoring, environmental sensing, biomedical storage, and smart infrastructure—where reliable, low-maintenance thermal tracking is essential.
Open AccessDesign and Development of a Low-Power IoT System for Continuous Temperature Monitoring
This article presents the development of a compact, high-precision, and energy-efficient temperature monitoring system designed for tracking applications where continuous and accurate thermal monitoring is essential. Built around the HY0020 System-on-Chip (SoC), the system integrates two bandgap-based temperature sensors—one internal to the SoC and one external (Si7020-A20)—mounted on a custom PCB and powered by a coin cell battery. A distinctive feature of the system is its support for real-time parameterization of the internal sensor, which enables advanced capabilities such as thermal profiling, cross-validation, and onboard diagnostics. The system was evaluated under both room temperature and refrigeration conditions, demonstrating high accuracy with the internal sensor showing an average error of 0.041 °C and −0.36 °C, respectively, and absolute errors below ±0.5 °C. With an average current draw of just 0.01727 mA, the system achieves an estimated autonomy of 6.6 years on a 1000 mAh battery. Data are transmitted via Bluetooth Low Energy (BLE) to a Raspberry Pi 4 gateway and forwarded to an IoT cloud platform for remote access and analysis. With a total cost of approximately EUR 20 and built entirely from commercially available components, this system offers a scalable and cost-effective solution for a wide range of temperature-sensitive applications. Its combination of precision, long-term autonomy, and advanced diagnostic capabilities make it suitable for deployment in diverse fields such as supply chain monitoring, environmental sensing, biomedical storage, and smart infrastructure—where reliable, low-maintenance thermal tracking is essential.
- Open Access
IoT-Enabled Real-Time Monitoring of Urban Garbage Levels Using Time-of-Flight Sensing Technology
This manuscript presents a real-time monitoring system for urban garbage levels using Time-of-Flight (ToF) sensing technology. The experiment employs the VL53L8CX sensor, which accurately measures distances, along with an ESP32-S3 microcontroller that enables IoT connectivity. The ToF-Node IoT system, consisting of the VL53L8CX sensor connected to the ESP32-S3, communicates with an IoT gateway (Raspberry Pi 3) via Wi-Fi, which then connects to an IoT cloud. The ToF-Node communicates with the IoT gateway using Wi-Fi, and after with the IoT cloud, also using Wi-Fi. This setup provides real-time data on waste container capacities, facilitating efficient waste collection management. By integrating sensor data and network communication, the system supports informed decision-making for optimizing collection logistics, contributing to cleaner and more sustainable cities. The ToF-Node was tested in four scenarios, with a PCB measuring 40 × 18 × 4 mm and an enclosure of 65 × 40 × 30 mm. We used an office trash box with a height of 250 mm (25 cm), and the ToF-Node was located on the top. Results demonstrate that the effectiveness of ToF technology in environmental monitoring and the potential of IoT to enhance urban services. For detailed monitoring, additional ToF sensors may be required. Data collected are displayed in the IoT cloud for better monitoring and can be viewed by level and volume. The ToF-Node and the IoT gateway have a combined power consumption of 153.8 mAh
Open AccessIoT-Enabled Real-Time Monitoring of Urban Garbage Levels Using Time-of-Flight Sensing Technology
This manuscript presents a real-time monitoring system for urban garbage levels using Time-of-Flight (ToF) sensing technology. The experiment employs the VL53L8CX sensor, which accurately measures distances, along with an ESP32-S3 microcontroller that enables IoT connectivity. The ToF-Node IoT system, consisting of the VL53L8CX sensor connected to the ESP32-S3, communicates with an IoT gateway (Raspberry Pi 3) via Wi-Fi, which then connects to an IoT cloud. The ToF-Node communicates with the IoT gateway using Wi-Fi, and after with the IoT cloud, also using Wi-Fi. This setup provides real-time data on waste container capacities, facilitating efficient waste collection management. By integrating sensor data and network communication, the system supports informed decision-making for optimizing collection logistics, contributing to cleaner and more sustainable cities. The ToF-Node was tested in four scenarios, with a PCB measuring 40 × 18 × 4 mm and an enclosure of 65 × 40 × 30 mm. We used an office trash box with a height of 250 mm (25 cm), and the ToF-Node was located on the top. Results demonstrate that the effectiveness of ToF technology in environmental monitoring and the potential of IoT to enhance urban services. For detailed monitoring, additional ToF sensors may be required. Data collected are displayed in the IoT cloud for better monitoring and can be viewed by level and volume. The ToF-Node and the IoT gateway have a combined power consumption of 153.8 mAh
- Open Access
- 6 March 2025
- Published by MDPI AG in Preprints.org
IoT-Enabled Real-Time Monitoring of Urban Garbage Levels Using Time-of-Flight Sensing Technology
This manuscript presents a real-time monitoring system for urban garbage levels using Time-of-Flight (ToF) sensing technology. The experiment employs the VL53L8CX sensor, which accurately measures distances, along with an ESP32-S3 microcontroller that enables IoT connectivity. The ToF-Node IoT system, consisting of the VL53L8CX sensor connected to the ESP32-S3, communicates with an IoT gateway (Raspberry Pi 3) via Wi-Fi, which then connects to an IoT cloud. ToF-Node communicates with IoT gateway using Wi-Fi and after with IoT cloud, also using Wi-Fi. This setup provides real-time data on waste container capacities, facilitating efficient waste collection management. By integrating sensor data and network communication, the system supports informed decision-making for optimizing collection logistics, contributing to cleaner and more sustainable cities. The ToF-Node was tested in four scenarios, with a PCB measuring 40 x 18 x 4 mm and an enclosure of 65 x 40 x 30 mm. Results demonstrate the effectiveness of ToF technology in environmental monitoring and the potential of IoT to enhance urban services. For detailed monitoring, additional ToF sensors may be required. Data collected is displayed in the IoT cloud to better monitoring and can be view level and volume. The ToF-Node and the IoT gateway have a combined power consumption of 153.8 mAh.
- 6 March 2025
- Published by MDPI AG in Preprints.org
Open AccessIoT-Enabled Real-Time Monitoring of Urban Garbage Levels Using Time-of-Flight Sensing Technology
This manuscript presents a real-time monitoring system for urban garbage levels using Time-of-Flight (ToF) sensing technology. The experiment employs the VL53L8CX sensor, which accurately measures distances, along with an ESP32-S3 microcontroller that enables IoT connectivity. The ToF-Node IoT system, consisting of the VL53L8CX sensor connected to the ESP32-S3, communicates with an IoT gateway (Raspberry Pi 3) via Wi-Fi, which then connects to an IoT cloud. ToF-Node communicates with IoT gateway using Wi-Fi and after with IoT cloud, also using Wi-Fi. This setup provides real-time data on waste container capacities, facilitating efficient waste collection management. By integrating sensor data and network communication, the system supports informed decision-making for optimizing collection logistics, contributing to cleaner and more sustainable cities. The ToF-Node was tested in four scenarios, with a PCB measuring 40 x 18 x 4 mm and an enclosure of 65 x 40 x 30 mm. Results demonstrate the effectiveness of ToF technology in environmental monitoring and the potential of IoT to enhance urban services. For detailed monitoring, additional ToF sensors may be required. Data collected is displayed in the IoT cloud to better monitoring and can be view level and volume. The ToF-Node and the IoT gateway have a combined power consumption of 153.8 mAh.