MLMing Li

Ming Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ming Li has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Reliability Enhancement SCFP-Treated Lateral β -Ga 2 O 3 MOSFETs With Low Interface Traps of ~10 10 cm –2 ⋅ eV –1 and Highest PFOM of 532 MW/cm 2

    by Zhang Wen, Mingchao Yang, Songquan Yang, Ming Li, Bangyao Mao, Leidang Zhou, Li Geng, Yue Hao

    This work presents a supercritical N2O fluid process supercritical fluid processing (SCFP) for significantly improving the performance and reliability of $\beta $ -Ga2O3 MOSFETs. The SCFP treatment achieves a record-low interface trap density ( ${D}_{\text {it}} = \sim 7 {\,}\times {\,}10^{{10}}$ cm ${}^{-{2}}\cdot $ eV ${}^{-{1}}\text {)}$ , representing an order-of-magnitude reduction compared to o/w SCF (without SCFP treated) devices ( $6.4\times 10^{{11}}$ cm ${}^{-{2}}\cdot $ eV ${}^{-{1}}\text {)}$ . Consequently, the SCFP-treated MOSFETs exhibit superior electrical characteristics, including 40% lower subthreshold swing (SS) (112.85mV/dec), $2.2\times $ lower specific on-resistance (26.1 m $\Omega \cdot $ cm ${}^{{2}}\text {)}$ , and 30% higher maximum drain current (I ${}_{\max } =165.8$ mA/mm). In addition, the devices demonstrate an outstanding breakdown voltage ( ${V}_{\text {BR}}\text {)}$ of 3727V, achieving a power figure-of-merit (FOM= V ${}_{\text {BR}}^{{2}}$ /R ${}_{\text {ON, {sp}}}\text {)}$ of 532MW/cm2—the highest reported for lateral $\beta $ -Ga2O3 MOSFETs without edge termination. And a temperature-dependent measurement confirms robust thermal stability, with a threshold voltage shift (ΔV TH) of only 6.33V at 400K. Stress testing (104 s) reveals minimal ${V}_{\text {TH}}$ instability (ΔV TH = 0.8 V), confirming suppressed trap generation. Moreover, SCFP-treated devices maintain excellent performance after three months of aging, demonstrating long-term reliability. This work establishes SCFP as a scalable fabrication technique that synergistically enhances interface quality and carrier transport, paving the way for high-performance ultrawide bandgap power electronics.


  • Low-dislocation, high-crystal-quality Si-doped AlN on 6-inch sapphire via plasma-seeded pulsed epitaxy

    by Bangyao Mao, Ming Li, Yi Yang, Zhang Wen, Weizhe Bi, Yuxuan Zhang, Yanbin Liu, Songquan Yang, Mingchao Yang, Weihua Liu, et al.

    Aluminum nitride (AlN), a wide-bandgap semiconductor, is widely used in advanced power electronics, deep-ultraviolet optoelectronics, and high-frequency acoustic devices. However, high-quality AlN epitaxy on large-area sapphire substrates remains challenging due to high dislocation density, residual stress, and doping-induced strain in conventional metal-organic chemical vapor deposition (MOCVD). In this work, we propose a Plasma-Seeded Pulsed Epitaxy (PSPE) strategy based on conventional low-temperature MOCVD equipment. By controlling nucleation behavior, growth mode, and defect evolution, we successfully fabricated 6-in., low-dislocation Si-doped AlN on sapphire. Compared with the control sample prepared without PSPE, the Si-doped AlN exhibited significantly improved crystal quality: surface roughness was reduced to 1.17 nm (30% reduction), average stress was reduced to −0.129 GPa (57% reduction), and the densities of screw and edge dislocations were reduced to 9.2 × 107 cm−2 (84.7% reduction) and 1.8 × 109 cm−2 (96.0% reduction), respectively. HRTEM further reveals that the PSPE strategy relieves interfacial lattice mismatch while promoting dislocation turning and annihilation. Based on this high-quality AlN, p-Si/AlN PN diodes with a high rectification ratio (106), low leakage current (10−12 A), high breakdown voltage (500–650 V), and good electrical stability were successfully fabricated, providing a practical approach for achieving high-quality AlN epitaxy and device fabrication on traditional MOCVD systems.

  • Elucidating oxygen vacancy passivation mechanism at Al2O3/ β -Ga2O3 interface via supercritical N2O processing

    by Zhang Wen, Mingchao Yang, Songquan Yang, Ming Li, Yi Yang, Bangyao Mao, Weizhe Bi, Chuanyu Han, Weihua Liu, Li Geng, et al.

    Oxygen vacancies (VO) at the β-Ga2O3 surface are associated with the high interface-trap densities (Dit, 1012–1013 cm−2 eV−1) that limit the threshold-voltage stability in Al2O3/β-Ga2O3 MOS devices. We combine first-principles calculations with Raman spectroscopy, photoluminescence (PL), x-ray photoelectron spectroscopy, and electrical characterization to examine how supercritical-fluid processing modifies these interface states. Perdew–Burke–Ernzerhof calculations with a rigid scissor correction to the experimental 4.8 eV bandgap identify in-gap states associated with the three inequivalent VO sites. Interstitial oxygen removes these states in the calculated model and increases the migration barrier from 0.08 to 1.8 eV. Experimentally, supercritical N2O (SN) treatment narrows the Raman linewidths at 347, 416, and 767 cm−1, suppresses the 2.4 and 2.8 eV defect-related PL bands, and increases the lattice-oxygen fraction from approximately 50% to more than 80%. A near-critical CO2 pre-clean further improves the SN response, consistent with removal of surface adsorbates before oxidation. The resulting NCSN process reduces Dit to 1.5 × 1011 cm−2 eV−1, lowers Nit by a factor of 6.4, and decreases the positive-bias-stress flatband-voltage shift from 0.79 to 0.23 V. Together, the calculations and measurements support oxygen vacancy filling and reduced oxygen migration as the main contributors to interface passivation.

  • 2.3 kV low leakage vertical (001) β-Ga2O3 diodes enabled by a synergistic guard ring and beveled field plate

    by Ming Li, Mingchao Yang, Leidang Zhou, Zhang Wen, Weihao Liu, Song Li, Songquan Yang, Weihua Liu, Chuanyu Han, Xin Li, et al.

    This study presents a vertical (001) β-Ga2O3 Schottky barrier diode (SBD) incorporating a composite edge termination structure, which combines a nitrogen-implanted guard ring (GR) with a small-angle beveled field plate (BFP). Leveraging technology computer-aided design simulations grounded in semiconductor physics, we developed and optimized the device's geometric structure. Integration of GR with BFPs enables suppression of the anode-edge electric-field peak without degrading the favorable forward conduction characteristics. Thanks to this optimized termination design, the fabricated diode achieves a breakdown voltage (Vbr) of 2.3 kV—6.5 times higher than that of nonterminated devices—along with a specific on-resistance (Ron,sp) of 3.19 mΩ cm2. These properties yield a high Baliga's figure of merit of 1.71 GW/cm2. Furthermore, at a reverse bias of −1500 V, the device demonstrates a low leakage current density of less than 1 μA/cm2. This work presents a feasible approach to improve the performance of β-Ga2O3 SBDs, paving the way for their adoption in power electronics.


  • Enhanced β-Ga2O3 Schottky diode interface characteristics via low-temperature supercritical fluid technology

    by Ming Li, Mingchao Yang, Leidang Zhou, Zhang Wen, Weihao Liu, Song Li, Songquan Yang, Li Geng, Yue Hao

    This study presents a comprehensive investigation into the impact of supercritical fluid (SCF) N2O treatment on β-Ga2O3 Schottky barrier diodes (SBDs). Capacitance-voltage (C-V) analysis indicates a marginal reduction in the carrier concentration within the β-Ga2O3 drift layer post-SCF treatment. Remarkably, the treated SBDs exhibit substantial electrical enhancement: breakdown voltage surges from 355 to 551 V, reverse current density plunges by approximately two orders of magnitude, and Baliga’s figure of merit improves by 92.8%. Temperature-dependent forward current-voltage measurements further demonstrate superior high-temperature operational stability in SCF-processed devices. Crucially, frequency-dependent conductance measurements reveal a significant decrease in interface state density, from 2.62 × 1012–1.14 × 1013 cm−2 eV−1 to 8.5 × 1011–3.30 × 1012 cm−2 eV−1, alongside reduced trap activation energy (from 0.211–0.220 to 0.209–0.220 eV). These findings establish SCF treatment as a potent technique for interfacial engineering and performance optimization in β-Ga2O3 SBDs.


  • The γ-Ray TID Effect and Irradiation Damage Recovery on β-Ga₂O₃/Al₂O₃ MOSCAPs

    by Song Li, Mingchao Yang, Leidang Zhou, Liang Chen, Silong Zhang, Fangbao Wang, Zhang Wen, Songquan Yang, Ming Li, Weihao Liu, et al.

    In this study, the impact of γ-ray total ionizing dose (TID) irradiation on the electrical performance of beta-gallium oxide (β-Ga2O3)/Al2O3 MOSCAPs was investigated, and a new irradiation damage recovery method was also proposed using the supercritical N2O (SCN2O) fluid postoxidation annealing (POA) process. After a cumulative γ-ray dose of 1.108 Mrad (SiO2), the net carrier concentration (Nd) decreased by 28.7%, and the interface state density (Dit) increased from 4.41 × 1011 to 5.12 × 1011 eV-1cm-2, according to the frequency-dependent capacitance–voltage (C–V) measurements. Meanwhile, the effective trapped charge density (Neff) was reduced from -1.82 × 1012 to -1.37 × 1012 eV-1cm-2, leading to a decreased flat-band voltage (Vfb), which was attributed to the formation of positively charged oxide trapped charge (Not). What is more, the forward leakage current density increased by ten times, and a 9.5% decrease in the breakdown voltage (Vbr) was observed according to the current–voltage (I–V) measurements. Moreover, the leakage current analysis indicated that the changes in the I–V characteristics were primarily caused by variations in Dit and Not. In addition, after the SCN2O POA process at 120 ∘C, the damages of the irradiated device can be repaired. Specifically, the material properties, such as Nd, Dit, and Neff, and the electrical properties of Vbr and the forward leakage current density recovered to the preirradiation level. The results demonstrated that the low-temperature SCN2O POA process is promising for repairing TID irradiation damage in β-Ga2O3/Al2O3⋅devices.


  • Mechanism of Improving Al₂O₃/β-Ga₂O₃ Interface After Supercritical Fluid Process at a Low Temperature

    by Zhang Wen, Mingchao Yang, Songquan Yang, Song Li, Ming Li, Leidang Zhou, Li Geng, Yue Hao

    β-Ga2O3, a wide bandgap semiconductor, has gained attention for its high breakdown voltage and fast switching properties. However, challenges exist because of high interface densities at the Al2O3/β-Ga2O3 interface, which greatly impacts the performance and reliability of metal–oxide–semiconductor field-effect transistor (MOSFET) devices. As a low-temperature solution, the supercritical fluid process (SCFP) is introduced to the fabrication process of Al2O3/β-Ga2O3 metal–oxide–semiconductor capacitor (MOSCAP), which effectively reduces the oxygen vacancies and interface defects, in particular avoiding the damage to the materials caused by high temperature. The near-interface traps are decreased by two times, and the interface states are reduced by five times. As a result, the breakdown electric field is improved from 6.01 to 8.47 MV cm-1. The mechanism of the SCFP is explored and explained by using different measurement and analysis methods. Deep-level transient spectroscopy (DLTS) results indicate that the defect concentration of SCFP devices decreases and the electron capture interface increases. Supercritical fluid treatment can passivate the traps by reducing O vacancies in the Al2O3. The study concludes that the proposed SCFP significantly improves the dielectric/semiconductor interface, which can greatly enhance the performance of transistors.