Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Rida Jbr has a total of 18 co-authors. Here are the top co-authors by number of shared publications:

  • Valeria Corinaldesi

    Università Politecnica delle Marche

    3 shared publications
  • Chiara Giosuè

    Department of Science and Engineering of Materials, Environment and Urban Planning-SIMAU, Università Politecnica delle Marche, INSTM Research Unit, 60131 Ancona, Italy

    2 shared publications
  • Maria Letizia Ruello

    Department of Science and Engineering of Materials, Environment and Urban Planning-SIMAU, Università Politecnica delle Marche, INSTM Research Unit, 60131 Ancona, Italy

    2 shared publications
  • Natalia Czerwinska

    Department of Science and Engineering of Materials, Environment and Urban Planning-SIMAU, Università Politecnica delle Marche, INSTM Research Unit, 60131 Ancona, Italy

    2 shared publications
  • Andreas Bartl

    Institute of Chemical, Environmental and Bioscience Engineering, TU Wien, Getreidemarkt 9/166, 1060 Vienna, Austria; JR Centre for Recovery Strategies for Textiles (ReSTex), Institute of Chemical, Environmental and Bioscience Engineering, TU Wien, Getreidemarkt 9/166, 1060 Vienna, Austria

    1 shared publication
  • Anna Laura Eusebi

    1 shared publication

Latest Publications

  • Open Access

    Microcrystalline Cellulose Extraction in Blended Textile Waste with Preliminary Evaluation of Polyester Integrity

    by Rida Jbr, Wolfgang Ipsmiller, Natalia Czerwinska, Simona Sabbatini, Chiara Giosuè, Pablo Kählig, Maria Letizia Ruello, Valeria Corinaldesi, Andreas Bartl, Rosa Di Maggio

    Mixed cotton–polyester textile waste remains difficult to recycle because processes that recover synthetic polymers often leave the cotton fraction underused, while cellulose extraction methods may compromise the polyester component. This study investigates whether cotton in such blends can be converted into high-quality microcrystalline cellulose while retaining the potential value of the recovered polyester fraction. Cotton waste and cotton–polyester blends were treated using aqueous sulfuric acid at different conditions: from 15 to 20% acid concentration and from 70 to 80 °C for five to ten hours. The recovered microcrystalline cellulose was characterised and compared to commercial microcrystalline cellulose, while the polyester fraction was assessed using tensile testing. Enzymatic hydrolysis and a dimethyl sulfoxide co-solvent approach were evaluated as alternatives. The aqueous acid process yielded 82 to 97% microcrystalline cellulose from cotton waste and up to 51% from blended waste. The recovered cellulose showed around 10% higher crystallinity than commercial material and a similar particle size distribution, although morphology depended on the feedstock. The polyester fraction showed only minor reductions in tensile performance. The novelty of this study lies in the demonstration of a simple, ionic-liquid-free, single-reagent route that valorises both material streams from cotton–polyester textile waste.

  • Open Access

    Supplementary cementitious material from food industry: Closing the loop using mollusk seashell waste

    by Chiara Giosuè, Rida Jbr, Josuè Gonzàlez-Camejo, Corinne Andreola, Maria Letizia Ruello, Anna Laura Eusebi, Francesco Fatone, Valeria Corinaldesi


  • Open Access

    Electrospun Fibers from Biobased and Recycled Materials for Indoor Air Quality Enhancement

    by Natalia Czerwinska, Chiara Giosuè, Nicola Generosi, Mattia Pierpaoli, Rida Jbr, Francesca Luzi, Valeria Corinaldesi, Maria Letizia Ruello

    Air filters are crucial components of building ventilation systems. Compared to conventional air filter media like glass fibers and melt-blown fibers, electrospinning membranes are more efficient for capturing various pollutants due to the smaller pores present on the structure. In this paper, activated carbon filters were prepared with eco-friendly polylactic acid (PLA) and microcrystalline cellulose (MCC) using electrospinning to obtain a high-quality factor (QF) fibrous mat for aerosol particle matter (PM) filtration and volatile organic compounds (VOCs) adsorption. Several configurations of the final membranes were investigated and tested for fiber morphology and air filtration performance. Filtering efficiency and adsorption properties were evaluated in a real-scale room by measuring the particle penetration of the newly synthesized and commercial filters against neutralized aerosol particles (3% NaCl aqueous solution) and VOCs (methyl ethyl ketone). The calculated depolluting efficiencies were up to 98% in terms of PM and 55% for VOCs abatement, respectively. Our results indicate that the proposed hybrid membranes represent promising materials for highly efficient and sustainable air filters for home application systems.