Hannah C. Howard
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hannah C. Howard has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Daniel S. Gianola
Materials Department, University of California Santa Barbara, Santa Barbara, USA
3 shared publications - William Streit Cunningham
University of California, Santa Barbara
2 shared publications A. Genc
1 shared publicationB. Merle
1 shared publication- Bailey E. Rhodes
University of California, Santa Barbara
1 shared publication - Cathy Wang
Materials Department University of California Santa Barbara California USA
1 shared publication
Latest Publications
- 5 November 2026
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 109 (11) , e71284
Mechanical Properties of High‐Purity, High‐Density NaSICON (Na 1+ x Zr 2 Si x P 3− x O 12 , 2 ≤ x ≤ 2.8)
NaSICON (Na Super Ionic Conductor) ceramics with formula Na 1+ x Zr 2 Si x P 3− x O 12 (NZSP) are leading solid electrolyte candidates for sodium‐based energy storage. However, the mechanical properties governing membrane reliability, namely elastic modulus, hardness, fracture toughness, and flexural strength, have not been systematically characterized across the full composition range, owing to confounding effects from porosity, glassy grain‐boundary phases, and ZrO 2 transformation‐induced and grain‐boundary microcracking in conventionally sintered materials. Here, we report the first comprehensive mechanical characterization of high‐purity (total secondary‐phase content < 10%), fully dense NZSP across x = 2.0–2.8, prepared by rapid induction hot‐pressing of powders prepared by solution‐assisted solid‐state reaction. Hot‐pressed samples achieve relative densities exceeding 99%, nanosized grains (150–200 nm), nanosized ZrO 2 particles, and glass‐free grain boundaries across most compositions. Elastic modulus increases from 109 GPa ( x = 2.0) to 124 GPa ( x = 2.8), attributed to progressive replacement of compliant phosphate units by stiffer silicate groups and the corresponding increase in the stiffer rhombohedral phase. Hardness follows the same trend, rising from 7.20 to 9.61 GPa. Fracture toughness falls between 1.0 and 1.5 MPa·m 1/2 . Biaxial flexure strength reaches a maximum of 195 MPa at x = 2.4. The critical grain size for thermal expansion anisotropy‐driven cracking falls from 9 µm ( x = 2) to 0.5 µm ( x = 3), for both phases above the hot‐pressed grain size at every composition.
- 5 November 2026
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 109 (11) , e71284
Mechanical Properties of High‐Purity, High‐Density NaSICON (Na 1+ x Zr 2 Si x P 3− x O 12 , 2 ≤ x ≤ 2.8)
NaSICON (Na Super Ionic Conductor) ceramics with formula Na 1+ x Zr 2 Si x P 3− x O 12 (NZSP) are leading solid electrolyte candidates for sodium‐based energy storage. However, the mechanical properties governing membrane reliability, namely elastic modulus, hardness, fracture toughness, and flexural strength, have not been systematically characterized across the full composition range, owing to confounding effects from porosity, glassy grain‐boundary phases, and ZrO 2 transformation‐induced and grain‐boundary microcracking in conventionally sintered materials. Here, we report the first comprehensive mechanical characterization of high‐purity (total secondary‐phase content < 10%), fully dense NZSP across x = 2.0–2.8, prepared by rapid induction hot‐pressing of powders prepared by solution‐assisted solid‐state reaction. Hot‐pressed samples achieve relative densities exceeding 99%, nanosized grains (150–200 nm), nanosized ZrO 2 particles, and glass‐free grain boundaries across most compositions. Elastic modulus increases from 109 GPa ( x = 2.0) to 124 GPa ( x = 2.8), attributed to progressive replacement of compliant phosphate units by stiffer silicate groups and the corresponding increase in the stiffer rhombohedral phase. Hardness follows the same trend, rising from 7.20 to 9.61 GPa. Fracture toughness falls between 1.0 and 1.5 MPa·m 1/2 . Biaxial flexure strength reaches a maximum of 195 MPa at x = 2.4. The critical grain size for thermal expansion anisotropy‐driven cracking falls from 9 µm ( x = 2) to 0.5 µm ( x = 3), for both phases above the hot‐pressed grain size at every composition.
- Open Access
- 25 November 2025
- Published by Elsevier in Acta Materialia
- Vol. 304
Kinetics of amorphous defect phases measured through ultrafast nanocalorimetry
- 25 November 2025
- Published by Elsevier in Acta Materialia
- Vol. 304
Open AccessKinetics of amorphous defect phases measured through ultrafast nanocalorimetry
- Open Access
- 9 March 2025
- Published by Elsevier in Acta Materialia
- Vol. 289
Chemically ordered dislocation defect phases as a new strengthening pathway in Ni–Al alloys
- 9 March 2025
- Published by Elsevier in Acta Materialia
- Vol. 289
Open AccessChemically ordered dislocation defect phases as a new strengthening pathway in Ni–Al alloys