Xiaofeng Chen
Xiaofeng Chen has a total of 60 co-authors. Here are the top co-authors by number of shared publications:
- Chang Du
Department of Biomaterials, School of Materials Science and Engineering, South China University of Technology, Guangzhou 510641, China
1 shared publication Chengbin Liu
State Key Laboratory of Chemo/Biosensing and Chemometrics, Hunan University, Changsha, 410082, China
1 shared publication- Chun-Lin Ni
Department of Applied Chemistry, College of Science, South China Agricultural University, Guangzhou 510642, People's Republic of China
1 shared publication Chunhui Wang
Stomatological Hospital, School of Stomatology, Southern Medical University, Guangzhou, 510280, PR China
1 shared publication- Cong Chen
Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment, Southeast University, Nanjing 210096, China
1 shared publication - Cong Liu
State Key Laboratory of Power Transmission Equipment and System Security and New Technology, Chongqing University, Chongqing, China
1 shared publication
Latest Publications
- Open Access
- 1 July 2025
- Published by KEAI Publishing in Bioactive Materials
- Vol. 49, 564-575
Bioactive vascular buds promote collateral vessel formation by grafting on the artificial vessel walls
Vascular injury and some chronic ischemic lesions usually lead to insufficient blood supply to tissues, which will lead to tissue ischemia or even necrosis in severe cases. Current artificial blood vessels lack effective collateral vascularization capabilities to provide adequate blood supply in areas with restricted blood flow. Herein, inspired by the grafting of tree buds to form lateral branches, the vascular buds model was successfully constructed by inoculating HUVECs into bioactive hydrogel microspheres. Under the influence of ions dissolved from bioactive glass and three-dimensional culture environment, the cytoskeleton was remodeled, the cells showed obvious outward migration and budding trend, which significantly enhanced the angiogenesis ability. After grafted vascular buds to the lateral wall of the artificial blood vessel, a large number of collateral vessels are formed, which effectively alleviates the tissue ischemia in the region through which blood vessels pass. This study confirms the impact of bioactive ions on angiogenesis in a three-dimensional environment and offers novel insights for the development of lateral branches in artificial blood vessels.
- 1 July 2025
- Published by KEAI Publishing in Bioactive Materials
- Vol. 49, 564-575
Open AccessBioactive vascular buds promote collateral vessel formation by grafting on the artificial vessel walls
Vascular injury and some chronic ischemic lesions usually lead to insufficient blood supply to tissues, which will lead to tissue ischemia or even necrosis in severe cases. Current artificial blood vessels lack effective collateral vascularization capabilities to provide adequate blood supply in areas with restricted blood flow. Herein, inspired by the grafting of tree buds to form lateral branches, the vascular buds model was successfully constructed by inoculating HUVECs into bioactive hydrogel microspheres. Under the influence of ions dissolved from bioactive glass and three-dimensional culture environment, the cytoskeleton was remodeled, the cells showed obvious outward migration and budding trend, which significantly enhanced the angiogenesis ability. After grafted vascular buds to the lateral wall of the artificial blood vessel, a large number of collateral vessels are formed, which effectively alleviates the tissue ischemia in the region through which blood vessels pass. This study confirms the impact of bioactive ions on angiogenesis in a three-dimensional environment and offers novel insights for the development of lateral branches in artificial blood vessels.
- Open Access
- 1 July 2025
- Published by KEAI Publishing in Bioactive Materials
- Vol. 49, 271-290
Unraveling osteogenesis mechanisms of the empowered VitaFlux adaptive regeneration biomaterials for bone tissue engineering: Insights into the role of BBGs/BSBGs
Bone tissue engineering materials are crucial for bone repair, but existing repair materials still face many challenges, including poor biocompatibility and bioactivity, slow self-repair processes, limited adaptability, inability to promote angiogenesis and so on. To address these issues, the development of third-generation bone repair materials, which are being designed to stimulate specific cellular responses at the molecular level, such as borate and borosilicate bioactive glasses (BBGs/BSBGs) that activate cells and genes, offers new potential for promoting bone tissue self-renewing. Their unique characteristic lies in a flow of life-giving energy, releasing beneficial ions such as boron, calcium and silicon to stimulate cell proliferation and differentiation, accelerating the regeneration of bones. Through this dynamic repair mechanism, these VitaFlux glasses operate like a "living system" within the body, not only speeding up the healing of damaged tissues but also interacting seamlessly with surrounding tissues during the repair process. In this review, we provide a comprehensive analysis of the current understanding of the osteogenesis mechanisms of BBGs/BSBGs, emphasizing their interactions with cells, including ion release and exchange, protein adsorption, and cell adhesion. We also examine key osteogenic signaling pathways related to the alkaline and ionic microenvironments of BBGs/BSBGs, such as the cell cycle, Wnt, MAPK, and BMP signaling pathways, along with macrophage polarization and angiogenesis. Additionally, strategies and future prospects for advancing BBGs/BSBGs research are discussed. Special attention is given to the NaBC1 and GPCR-mediated signaling pathways, which require further investigation.
- 1 July 2025
- Published by KEAI Publishing in Bioactive Materials
- Vol. 49, 271-290
Open AccessUnraveling osteogenesis mechanisms of the empowered VitaFlux adaptive regeneration biomaterials for bone tissue engineering: Insights into the role of BBGs/BSBGs
Bone tissue engineering materials are crucial for bone repair, but existing repair materials still face many challenges, including poor biocompatibility and bioactivity, slow self-repair processes, limited adaptability, inability to promote angiogenesis and so on. To address these issues, the development of third-generation bone repair materials, which are being designed to stimulate specific cellular responses at the molecular level, such as borate and borosilicate bioactive glasses (BBGs/BSBGs) that activate cells and genes, offers new potential for promoting bone tissue self-renewing. Their unique characteristic lies in a flow of life-giving energy, releasing beneficial ions such as boron, calcium and silicon to stimulate cell proliferation and differentiation, accelerating the regeneration of bones. Through this dynamic repair mechanism, these VitaFlux glasses operate like a "living system" within the body, not only speeding up the healing of damaged tissues but also interacting seamlessly with surrounding tissues during the repair process. In this review, we provide a comprehensive analysis of the current understanding of the osteogenesis mechanisms of BBGs/BSBGs, emphasizing their interactions with cells, including ion release and exchange, protein adsorption, and cell adhesion. We also examine key osteogenic signaling pathways related to the alkaline and ionic microenvironments of BBGs/BSBGs, such as the cell cycle, Wnt, MAPK, and BMP signaling pathways, along with macrophage polarization and angiogenesis. Additionally, strategies and future prospects for advancing BBGs/BSBGs research are discussed. Special attention is given to the NaBC1 and GPCR-mediated signaling pathways, which require further investigation.
- 1 November 2021
- Published by Elsevier in Applied Surface Science
- Vol. 565, 150560
Corrigendum to “Structure and surface nanomechanics of poly(l-lactide) from thermally induced phase separation process” [Appl. Surf. Sci. 258 (2012) 6665–6671]
- 1 November 2021
- Published by Elsevier in Applied Surface Science
- Vol. 565, 150560
Corrigendum to “Structure and surface nanomechanics of poly(l-lactide) from thermally induced phase separation process” [Appl. Surf. Sci. 258 (2012) 6665–6671]
- Open Access
- 9 June 2021
- Published by Wiley in Wound Repair and Regeneration
- Vol. 29 (5) , 820-829
A novel chronic wound biofilm model sustaining coexistence of Pseudomonas aeruginosa and Staphylococcus aureus suitable for testing of antibiofilm effect of antimicrobial solutions and wound dressings
Chronic wounds are a large burden to patients and healthcare systems. Biofilm infections in chronic wounds are crucial factors leading to non‐healing of wounds. It is important to study biofilm in wounds and to develop effective interventions against wound biofilm. This study presents a novel in vitro biofilm model mimicking infected chronic wounds. The novel layered chronic wound biofilm model uses woundlike media and includes both Pseudomonas aeruginosa and Staphylococcus aureus, which have been identified as the most important pathogens in wounds. The model sustains their coexistence for at least 96 h. Microscopy of the model revealed microbial growth in non‐surface attached microcolonies as previously observed in vivo. The model was used to determine log10‐reduction for the use of an antimicrobial solution and antimicrobial dressings (containing silver or honey) showing moderate‐to‐low antibiofilm effect, which indicates better concordance with the observed clinical performance of this type of treatment than other widely used standard tests.
- 9 June 2021
- Published by Wiley in Wound Repair and Regeneration
- Vol. 29 (5) , 820-829
Open AccessA novel chronic wound biofilm model sustaining coexistence of Pseudomonas aeruginosa and Staphylococcus aureus suitable for testing of antibiofilm effect of antimicrobial solutions and wound dressings
Chronic wounds are a large burden to patients and healthcare systems. Biofilm infections in chronic wounds are crucial factors leading to non‐healing of wounds. It is important to study biofilm in wounds and to develop effective interventions against wound biofilm. This study presents a novel in vitro biofilm model mimicking infected chronic wounds. The novel layered chronic wound biofilm model uses woundlike media and includes both Pseudomonas aeruginosa and Staphylococcus aureus, which have been identified as the most important pathogens in wounds. The model sustains their coexistence for at least 96 h. Microscopy of the model revealed microbial growth in non‐surface attached microcolonies as previously observed in vivo. The model was used to determine log10‐reduction for the use of an antimicrobial solution and antimicrobial dressings (containing silver or honey) showing moderate‐to‐low antibiofilm effect, which indicates better concordance with the observed clinical performance of this type of treatment than other widely used standard tests.
- 28 February 2021
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11781, 117810N-88
Influence of power ratio of the main amplifier to master oscillator on slope efficiency
In a typical multi-kW industrial fiber laser, the influence of the main amplifier to master oscillator power ratio on laser performance has been fully demonstrated. An optimized output power ratio is obtained to be ~5, which can provide the maximum main amplifier slope efficiency of ~78.2% at multi-kW laser output. In this case, the laser setup was kept at ∼2.6kW for 1h and the output power presented a relatively small power degradation of 0.36%. It was found the injected seed power has no remarkable effect on the optimal slope efficiency for industry fiber laser. The present results indicated that a suitable power ratio between the main amplifier and the oscillator is of great importance for the power scaling up and high stability of industry fiber laser.
- 28 February 2021
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11781, 117810N-88
Influence of power ratio of the main amplifier to master oscillator on slope efficiency
In a typical multi-kW industrial fiber laser, the influence of the main amplifier to master oscillator power ratio on laser performance has been fully demonstrated. An optimized output power ratio is obtained to be ~5, which can provide the maximum main amplifier slope efficiency of ~78.2% at multi-kW laser output. In this case, the laser setup was kept at ∼2.6kW for 1h and the output power presented a relatively small power degradation of 0.36%. It was found the injected seed power has no remarkable effect on the optimal slope efficiency for industry fiber laser. The present results indicated that a suitable power ratio between the main amplifier and the oscillator is of great importance for the power scaling up and high stability of industry fiber laser.
- 1 November 2017
- Published by Elsevier in Materials Letters
- Vol. 206, 205-209
Facile synthesis and in vitro bioactivity of radial mesoporous bioactive glasses
- 1 November 2017
- Published by Elsevier in Materials Letters
- Vol. 206, 205-209
Facile synthesis and in vitro bioactivity of radial mesoporous bioactive glasses
- 14 May 2016
- Published by Wiley in Journal of Biomedical Materials Research Part A
- Vol. 104 (10) , 2420-2429
Regulation of cellular behaviors of fibroblasts related to wound healing by sol–gel derived bioactive glass particles
Sol–gel derived bioactive glass (BG) holds great potential in the application of skin repair. However, the specific regulation of BG on skin cells is still unclear and demands more investigation. Herein, we synthesized sol–gel derived BGs with different compositions (60S, 70S, 80S, and 90S) and found 90S BGs (90 mol % SiO2, 6 mol % CaO, 4 mol % P2O5) exhibited the best supportiveness for the proliferation of normal human foreskin fibroblasts. Thus, 90S BG particles were used as a model to systematically study the wound healing related cellular response of fibroblasts to BGs. Time‐lapse imaging revealed a promoted fibroblast motility stimulated by 90S BG particles. Results on the expression of extracellular matrix (ECM) related genes illustrated that 90S BG particles modulated the synthesis capacity for critical ECM molecules including type I collagen, type III collagen, fibronectin, and tenascin‐C. Moreover, the myofibroblastic differentiation of fibroblasts was greatly inhibited by 90S BG particles. Further analysis on the intracellular signaling pathways demonstrated that 90S BG particles down‐regulated the collagen synthesis and fibroblast‐to‐myofibroblast differentiation via TGF‐β1‐Smad2 signaling, evidenced by the decreased expression levels of TGF‐β receptor I and its downstream effector Smad2. Our study provided a further understanding of the specific regulation of 90S BG particles on fibroblasts, which may guide the future design of BG based wound dressing and benefit the clinical application of BG particles in skin repair. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2420–2429, 2016.
- 14 May 2016
- Published by Wiley in Journal of Biomedical Materials Research Part A
- Vol. 104 (10) , 2420-2429
Regulation of cellular behaviors of fibroblasts related to wound healing by sol–gel derived bioactive glass particles
Sol–gel derived bioactive glass (BG) holds great potential in the application of skin repair. However, the specific regulation of BG on skin cells is still unclear and demands more investigation. Herein, we synthesized sol–gel derived BGs with different compositions (60S, 70S, 80S, and 90S) and found 90S BGs (90 mol % SiO2, 6 mol % CaO, 4 mol % P2O5) exhibited the best supportiveness for the proliferation of normal human foreskin fibroblasts. Thus, 90S BG particles were used as a model to systematically study the wound healing related cellular response of fibroblasts to BGs. Time‐lapse imaging revealed a promoted fibroblast motility stimulated by 90S BG particles. Results on the expression of extracellular matrix (ECM) related genes illustrated that 90S BG particles modulated the synthesis capacity for critical ECM molecules including type I collagen, type III collagen, fibronectin, and tenascin‐C. Moreover, the myofibroblastic differentiation of fibroblasts was greatly inhibited by 90S BG particles. Further analysis on the intracellular signaling pathways demonstrated that 90S BG particles down‐regulated the collagen synthesis and fibroblast‐to‐myofibroblast differentiation via TGF‐β1‐Smad2 signaling, evidenced by the decreased expression levels of TGF‐β receptor I and its downstream effector Smad2. Our study provided a further understanding of the specific regulation of 90S BG particles on fibroblasts, which may guide the future design of BG based wound dressing and benefit the clinical application of BG particles in skin repair. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2420–2429, 2016.
- Open Access
- 1 March 2014
- Vol. 17 (3) , 175-182-82
[Screening and establishment of human lung cancer cell lines with organ-specific metastasis potential].
Background and objective Cancer metastasis is not only the malignant marker and characteristics, but also the main cause of failure to cure and lose their life in the patients with lung cancer. Lung cancer metastasis has organ-specific characteristics. The most common sites of lung cancer metastasis are mediastinal lymph node, brain, bone, liver and adrenal gland. The aim of this study is to screen and establish lung cancer cell model with organ-specific metastasis potential with human high-metastatic large cell lung cancer cell line L9981 established by our laboratory previously, and to provide cell models for studying the mechanisms and signal regulation of organ-specific metastasis of lung cancer. Materials and methods The parent lung cancer cell line, L9981-Luc, was inoculated in the armpit of nude mice. The live animal imaging system, IVIS-200, was used to detect the lung cancer organ-specific metastasis every week. When the organ-specific metastasis were established, the nude mices bearing the lung cancer were sacrificed when they became moribund. Under sterile conditions, the organs (mediastinal lymph nodes, lung, spinal column and brain) with lung cancer organ-specific metastasis were removed and the metastasized nodules were dissected free of connective tissue and blood clots, and rinsed twice with medium. The metastasized nodules were finely minced using sterile scalpel blades in medium, and the cells were seeded in tissue culture dishes. Then, the cells with organ-specific metastasis potential were reinoculated into the armpit of nude mice, respectively. This processes were repeated to establish the organ-specific metastatic sublines of L9981-Luc cell line more than 10 times. Finally, the organ-specific metastasis sublines of L9981-Luc were screened and established, which the four cell lines have the characteristics only metastasized to brian, lung, bone and mediastinal lymph node. Results A group of organ-specific metastasis cell lines which only metastasized to brian, lung, bone and mediastinal lymph node were successfully established through repeating reinoculatation, live animal imaging in nude mice, and screening and identification in vitro. We named the four cell lines as L9981-BoM, L9981-LuM, L9981-BrM and L9981-LnM, respectively. The L9981-BoM cell was only metastasized to bone. The l9981-LuM cell was only metastasized to lung. The L9981-BrM only metastasized to brain. The L9981-LnM cell was only metastasized to midiastinal lymph nodes. Conclusions A human large cell lung cancer cell model with bone, lung, brain and lymph node-specific metastasis potential was successfully established. It will be helpful to further study the molecular mechanisms and signal regulation of lung cancer organ- specific metastasis. It will be to also provide reliable cell model for developing new techniques and molecular targeting drugs of inhibiting or reversing lung cancer metastasis. DOI: 10.3779/j.issn.1009-3419.2014.03.20
- 1 March 2014
- Vol. 17 (3) , 175-182-82
Open Access[Screening and establishment of human lung cancer cell lines with organ-specific metastasis potential].
Background and objective Cancer metastasis is not only the malignant marker and characteristics, but also the main cause of failure to cure and lose their life in the patients with lung cancer. Lung cancer metastasis has organ-specific characteristics. The most common sites of lung cancer metastasis are mediastinal lymph node, brain, bone, liver and adrenal gland. The aim of this study is to screen and establish lung cancer cell model with organ-specific metastasis potential with human high-metastatic large cell lung cancer cell line L9981 established by our laboratory previously, and to provide cell models for studying the mechanisms and signal regulation of organ-specific metastasis of lung cancer. Materials and methods The parent lung cancer cell line, L9981-Luc, was inoculated in the armpit of nude mice. The live animal imaging system, IVIS-200, was used to detect the lung cancer organ-specific metastasis every week. When the organ-specific metastasis were established, the nude mices bearing the lung cancer were sacrificed when they became moribund. Under sterile conditions, the organs (mediastinal lymph nodes, lung, spinal column and brain) with lung cancer organ-specific metastasis were removed and the metastasized nodules were dissected free of connective tissue and blood clots, and rinsed twice with medium. The metastasized nodules were finely minced using sterile scalpel blades in medium, and the cells were seeded in tissue culture dishes. Then, the cells with organ-specific metastasis potential were reinoculated into the armpit of nude mice, respectively. This processes were repeated to establish the organ-specific metastatic sublines of L9981-Luc cell line more than 10 times. Finally, the organ-specific metastasis sublines of L9981-Luc were screened and established, which the four cell lines have the characteristics only metastasized to brian, lung, bone and mediastinal lymph node. Results A group of organ-specific metastasis cell lines which only metastasized to brian, lung, bone and mediastinal lymph node were successfully established through repeating reinoculatation, live animal imaging in nude mice, and screening and identification in vitro. We named the four cell lines as L9981-BoM, L9981-LuM, L9981-BrM and L9981-LnM, respectively. The L9981-BoM cell was only metastasized to bone. The l9981-LuM cell was only metastasized to lung. The L9981-BrM only metastasized to brain. The L9981-LnM cell was only metastasized to midiastinal lymph nodes. Conclusions A human large cell lung cancer cell model with bone, lung, brain and lymph node-specific metastasis potential was successfully established. It will be helpful to further study the molecular mechanisms and signal regulation of lung cancer organ- specific metastasis. It will be to also provide reliable cell model for developing new techniques and molecular targeting drugs of inhibiting or reversing lung cancer metastasis. DOI: 10.3779/j.issn.1009-3419.2014.03.20
- 1 January 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
A concave tapered DFB semiconductor laser based on reconstruction-equivalent-chirp technology
A concave tapered DFB semiconductor laser based on reconstruction-equivalent-chirp (REC) technology was designed and experimentally demonstrated for the first time to the best of our knowledge. As predicted theoretically, the concave tapered DFB laser with a π phase shift can suppress the spatial hole burning effectively. But the realization of such lasers has not been reported up to now to our knowledge for its hard fabrication. In this paper, this kind of laser has been successfully fabricated with the combination of the equivalent apodization and equivalent phase shift. Because the seeding grating of the sampling structure keeps uniform, such structures with different taper profiles s can be fabricated on the same wafer simultaneously by the standard holographic exposure easily. Experimental results show that the laser maintains good single longitudinal mode operation with side mode suppression ratio (SMSR) nearly 50 dB under high injection current of 100mA.
- 1 January 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
A concave tapered DFB semiconductor laser based on reconstruction-equivalent-chirp technology
A concave tapered DFB semiconductor laser based on reconstruction-equivalent-chirp (REC) technology was designed and experimentally demonstrated for the first time to the best of our knowledge. As predicted theoretically, the concave tapered DFB laser with a π phase shift can suppress the spatial hole burning effectively. But the realization of such lasers has not been reported up to now to our knowledge for its hard fabrication. In this paper, this kind of laser has been successfully fabricated with the combination of the equivalent apodization and equivalent phase shift. Because the seeding grating of the sampling structure keeps uniform, such structures with different taper profiles s can be fabricated on the same wafer simultaneously by the standard holographic exposure easily. Experimental results show that the laser maintains good single longitudinal mode operation with side mode suppression ratio (SMSR) nearly 50 dB under high injection current of 100mA.