Antonio Ammendola
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Antonio Ammendola has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
Federico Roman
2 shared publicationsMichele Rebesco
2 shared publicationsEletta Negretti
1 shared publication- Elisabetta Rosina
Department of Architecture, Built Environment and Construction Engineering, Polytechnic University of Milan, 20133 Milan, Italy
1 shared publication Federico Falcini
1 shared publication- Federico Falcini
Istituto di Scienze Marine, Consiglio Nazionale delle Ricerche, Roma 00133, Italy
1 shared publication
Latest Publications
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Boundaries behaviour of gravity currents
Gravity currents are buoyancy-driven flows generated by horizontal density gradients and govern the transport of mass, momentum, and scalars in both natural and engineered systems. A detailed understanding of their near-wall behavior is essential for accurately describing the turbulent mechanisms developing in this region, which is characterized by strong spatial variability, particularly at increasing Reynolds numbers (Re=UbH/ν, with H the initial height of the dense fluid, ν the cinematic viscosity, Ub=(g’H)0.5 a velocity scale related to the reduced gravity g’=g(ρ1- ρ0)/ ρ0, where g is the gravitational acceleration, ρ1 the density of the heavier fluid and ρ0 the ambient density). Several numerical simulations were performed in straight channels under a lock-exchange configuration using a wall-resolved Large Eddy Simulation. The analyzed cases differ in terms of Reynolds number (in the range 34000-136000), both by increasing the height of the domain and by modifying the density difference. The analysis of the near-wall behavior focused on the head of the current, identified through mean density values. Subsequently, streamwise velocity profiles in the wall-normal direction were extracted, first averaged in the spanwise direction and then also along the streamwise direction. Although the latter direction is not homogeneous, this procedure provides an overall view of the behavior of the current head during its temporal evolution. The gradient of the streamwise velocity in the wall-normal direction was used to define the boundary-layer thickness δ. It was observed that the temporal evolution of the normalized thickness δ* = δ/H is similar for all the cases analyzed; moreover, after an initial increase, it tends to approach an asymptotic value during the self-similar phase. In accordance with the characteristics of this phase, it is also observed that the mean velocity profile tends to remain invariant over time during the evolution of the current. Moreover, the presence of a logarithmic region is identified, of the form u+=a(lny+)+bu+=alny++b (where u+=u/u𝜏, and y+=yu𝜏/νy+=yu𝜏/𝜈, u𝜏 denoting the friction velocity), with an increase in the slope A (in a logarithmic plot) relative to the canonical value (A=2.44), consistent with the local presence of stable stratification. The results obtained may have important implications for the parameterization of simplified large-scale circulation models, particularly with regard to the definition of appropriate boundary conditions.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessBoundaries behaviour of gravity currents
Gravity currents are buoyancy-driven flows generated by horizontal density gradients and govern the transport of mass, momentum, and scalars in both natural and engineered systems. A detailed understanding of their near-wall behavior is essential for accurately describing the turbulent mechanisms developing in this region, which is characterized by strong spatial variability, particularly at increasing Reynolds numbers (Re=UbH/ν, with H the initial height of the dense fluid, ν the cinematic viscosity, Ub=(g’H)0.5 a velocity scale related to the reduced gravity g’=g(ρ1- ρ0)/ ρ0, where g is the gravitational acceleration, ρ1 the density of the heavier fluid and ρ0 the ambient density). Several numerical simulations were performed in straight channels under a lock-exchange configuration using a wall-resolved Large Eddy Simulation. The analyzed cases differ in terms of Reynolds number (in the range 34000-136000), both by increasing the height of the domain and by modifying the density difference. The analysis of the near-wall behavior focused on the head of the current, identified through mean density values. Subsequently, streamwise velocity profiles in the wall-normal direction were extracted, first averaged in the spanwise direction and then also along the streamwise direction. Although the latter direction is not homogeneous, this procedure provides an overall view of the behavior of the current head during its temporal evolution. The gradient of the streamwise velocity in the wall-normal direction was used to define the boundary-layer thickness δ. It was observed that the temporal evolution of the normalized thickness δ* = δ/H is similar for all the cases analyzed; moreover, after an initial increase, it tends to approach an asymptotic value during the self-similar phase. In accordance with the characteristics of this phase, it is also observed that the mean velocity profile tends to remain invariant over time during the evolution of the current. Moreover, the presence of a logarithmic region is identified, of the form u+=a(lny+)+bu+=alny++b (where u+=u/u𝜏, and y+=yu𝜏/νy+=yu𝜏/𝜈, u𝜏 denoting the friction velocity), with an increase in the slope A (in a logarithmic plot) relative to the canonical value (A=2.44), consistent with the local presence of stable stratification. The results obtained may have important implications for the parameterization of simplified large-scale circulation models, particularly with regard to the definition of appropriate boundary conditions.
- Open Access
- 4 September 2025
- Published by Elsevier in Advances in Water Resources
- Vol. 206
Gravity currents and wall behavior modeling at high Reynolds numbers
- 4 September 2025
- Published by Elsevier in Advances in Water Resources
- Vol. 206
Open AccessGravity currents and wall behavior modeling at high Reynolds numbers
- Open Access
- 29 August 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (17) , 9480
Heritage at Altitude: Navigating Moisture Challenges in Alpine Architectural Conservation
This study presents the diagnostics and microclimate analysis of four case studies located in the Alps region in Valtellina and Valposchiavo. The primary focus is on evaluating and comparing microclimatic conditions, encompassing temperature (T°C), relative humidity (RH%), mixing ratio (MR), and dew point depression (DPD). The choice of the variables and statistic metrics depends substantially on the aim to identify the risk factor for the preservation of the historical materials of historical buildings, and the procedures for identifying the anomalies in the trends useful to study how to prevent these anomalies in the future. The paper has the target to support the activities of restorers and building managers for improving the restoration process. While various moisture detection methodologies have been studied, no single approach is preferred for analyzing moisture via microclimate monitoring in built heritage. Therefore, this research delves into the influence of various factors, including altitude, location, building type, structure, materials, orientation, and use, on the microclimatic parameters. Altitude and building use significantly influence indoor microclimates: unoccupied structures exhibit greater stability, whereas seasonal use increases condensation risks. Key risks included high RH% and critical T-RH zones (T > 25 °C + RH > 65%), exacerbating material stress. Probability density function (PDF) analysis reveals temperature and RH% distributions, highlighting bimodal T°C patterns and prolonged RH% in high-elevation exposed sites. The findings underscore the need for tailored conservation strategies and targeted interventions to mitigate microclimate-induced deterioration in Alpine heritage.
- 29 August 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (17) , 9480
Open AccessHeritage at Altitude: Navigating Moisture Challenges in Alpine Architectural Conservation
This study presents the diagnostics and microclimate analysis of four case studies located in the Alps region in Valtellina and Valposchiavo. The primary focus is on evaluating and comparing microclimatic conditions, encompassing temperature (T°C), relative humidity (RH%), mixing ratio (MR), and dew point depression (DPD). The choice of the variables and statistic metrics depends substantially on the aim to identify the risk factor for the preservation of the historical materials of historical buildings, and the procedures for identifying the anomalies in the trends useful to study how to prevent these anomalies in the future. The paper has the target to support the activities of restorers and building managers for improving the restoration process. While various moisture detection methodologies have been studied, no single approach is preferred for analyzing moisture via microclimate monitoring in built heritage. Therefore, this research delves into the influence of various factors, including altitude, location, building type, structure, materials, orientation, and use, on the microclimatic parameters. Altitude and building use significantly influence indoor microclimates: unoccupied structures exhibit greater stability, whereas seasonal use increases condensation risks. Key risks included high RH% and critical T-RH zones (T > 25 °C + RH > 65%), exacerbating material stress. Probability density function (PDF) analysis reveals temperature and RH% distributions, highlighting bimodal T°C patterns and prolonged RH% in high-elevation exposed sites. The findings underscore the need for tailored conservation strategies and targeted interventions to mitigate microclimate-induced deterioration in Alpine heritage.
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
Effect of inflow channel aspect ratio on the plunging dynamics of an unconfined hyperpycnal plume over a sloping bed
Hyperpycnal (denser) river inflows into lakes bring sediments, nutrients, oxygen and contaminants, which are crucial for the water quality. Due to the higher densities of hyperpycnal inflows, they abruptly descend toward the lake bottom upon entering the lake, a process called plunging, and subsequently continue flowing along the lake bottom as a gravity-driven underflow. This plunging is accompanied by mixing and entrainment of ambient lake waters, which causes dilution of the initial density excess of the river inflow. The mixing is parameterized by the plunging mixing coefficient Ep and is of critical importance as it conditions the fate and final destination of the contaminants carried by the river inflows. A recently proposed conceptual model (Thorez et al. 2024) for the plunging into an unconfined lake configuration highlights the importance of the lateral slumping motion of the river plume and secondary flow cells on each side of the plume with respect to the plunging mixing.This study builds on previous research that suggests that Ep is affected by the geometry of the river mouth. We investigate with Particle Image Velocimetry (PIV) in laboratory experiments how the width-to-depth ratio at the river mouth (W0H−1) influences the plume hydrodynamics and Ep. Four different ratios, W0H−1 = 5.4, 9, 13.5 and 27, were investigated in a configuration that mimics the Rhône inflow into Lake Geneva. The laboratory experiments were performed in the Coriolis platform at LEGI (Laboratoire des Ecoulements Géophysiques et Industriels) at a scale of 1:60 that allows minimal scaling effect.The distance of the plunge location from the river mouth, xp, and the corresponding depth, hp, were found to decrease with the aspect ratio. In addition, the size of the secondary flow cells on each side of the slumping river plume decreased with aspect ratio which tentatively explains the observed variations in Ep.
- 18 March 2025
- Published by Copernicus GmbH
Open AccessEffect of inflow channel aspect ratio on the plunging dynamics of an unconfined hyperpycnal plume over a sloping bed
Hyperpycnal (denser) river inflows into lakes bring sediments, nutrients, oxygen and contaminants, which are crucial for the water quality. Due to the higher densities of hyperpycnal inflows, they abruptly descend toward the lake bottom upon entering the lake, a process called plunging, and subsequently continue flowing along the lake bottom as a gravity-driven underflow. This plunging is accompanied by mixing and entrainment of ambient lake waters, which causes dilution of the initial density excess of the river inflow. The mixing is parameterized by the plunging mixing coefficient Ep and is of critical importance as it conditions the fate and final destination of the contaminants carried by the river inflows. A recently proposed conceptual model (Thorez et al. 2024) for the plunging into an unconfined lake configuration highlights the importance of the lateral slumping motion of the river plume and secondary flow cells on each side of the plume with respect to the plunging mixing.This study builds on previous research that suggests that Ep is affected by the geometry of the river mouth. We investigate with Particle Image Velocimetry (PIV) in laboratory experiments how the width-to-depth ratio at the river mouth (W0H−1) influences the plume hydrodynamics and Ep. Four different ratios, W0H−1 = 5.4, 9, 13.5 and 27, were investigated in a configuration that mimics the Rhône inflow into Lake Geneva. The laboratory experiments were performed in the Coriolis platform at LEGI (Laboratoire des Ecoulements Géophysiques et Industriels) at a scale of 1:60 that allows minimal scaling effect.The distance of the plunge location from the river mouth, xp, and the corresponding depth, hp, were found to decrease with the aspect ratio. In addition, the size of the secondary flow cells on each side of the slumping river plume decreased with aspect ratio which tentatively explains the observed variations in Ep.