Francesco Torelli
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Francesco Torelli has a total of 61 co-authors. Here are the top co-authors by number of shared publications:
- Kamal Mustafa
Department of Clinical Dentistry, University of Bergen, Bergen, Norway
4 shared publications - Shuntaro Yamada
Centre for Craniofacial & Regenerative Biology, Faculty of Dentistry, Oral & Craniofacial Sciences King's College London London UK
3 shared publications - Ana Angelova Volponi
FoDOCS, Centre of Dental Education KCL UK
2 shared publications - Antonio Brillantino
Department of Surgery, A. Cardarelli Hospital, Naples, Italy
2 shared publications - Giuseppe Izzo
Dipartimento di Matematica e Applicazioni, Università di Napoli “Federico II”, Napoli, Italy
2 shared publications - Inge Fristad
Department of Clinical Dentistry, Faculty of Medicine, University of Bergen, 5009 Bergen, Norway
2 shared publications
Latest Publications
- Open Access
- 3 July 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Impact of Chronic Hydration–Dehydration Cycling on Enamel Analog Microhardness and Crack Propagation: An in Vitro Model of Dry Environmental Stress
Objective: To evaluate the effects of repeated hydration–dehydration cycles on the mechanical integrity of enamel analog materials, focusing on microhardness reduction and crack propagation behavior under simulated dry conditions. Methods: Commercial hydroxyapatitebased enamel analog discs (n = 60; diameter 6 mm, thickness 2 mm; Sigma-Aldrich) were subjected to controlled hydration–dehydration cycles over 14 days. Four groups were established: Control (constant hydration), Mild (1 cycle/day), Moderate (3 cycles/day), and Sustained (6 cycles/day). Dehydration was performed at 37°C and 20% relative humidity, followed by rehydration in artificial saliva. Mechanical properties were assessed via Vickers microhardness testing and nanoindentation mapping. Crack propagation was evaluated using controlled indentation and quantified by optical microscopy and SEM. Results: Microhardness decreased progressively with cycling frequency, with Sustained cycling showing a 28% reduction compared to Control (p < 0.01). Crack propagation length increased significantly in Moderate and Sustained groups, reaching a 2.1-fold increase. SEM analysis revealed microstructural discontinuities and increased porosity in high-frequency cycling conditions. Significance: Hydration–dehydration cycling induces fatigue-like degradation in enamel analogs, significantly compromising mechanical integrity. This model provides a reproducible, ethics-independent framework for studying environmental stress on enamel-like materials.
- 3 July 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessImpact of Chronic Hydration–Dehydration Cycling on Enamel Analog Microhardness and Crack Propagation: An in Vitro Model of Dry Environmental Stress
Objective: To evaluate the effects of repeated hydration–dehydration cycles on the mechanical integrity of enamel analog materials, focusing on microhardness reduction and crack propagation behavior under simulated dry conditions. Methods: Commercial hydroxyapatitebased enamel analog discs (n = 60; diameter 6 mm, thickness 2 mm; Sigma-Aldrich) were subjected to controlled hydration–dehydration cycles over 14 days. Four groups were established: Control (constant hydration), Mild (1 cycle/day), Moderate (3 cycles/day), and Sustained (6 cycles/day). Dehydration was performed at 37°C and 20% relative humidity, followed by rehydration in artificial saliva. Mechanical properties were assessed via Vickers microhardness testing and nanoindentation mapping. Crack propagation was evaluated using controlled indentation and quantified by optical microscopy and SEM. Results: Microhardness decreased progressively with cycling frequency, with Sustained cycling showing a 28% reduction compared to Control (p < 0.01). Crack propagation length increased significantly in Moderate and Sustained groups, reaching a 2.1-fold increase. SEM analysis revealed microstructural discontinuities and increased porosity in high-frequency cycling conditions. Significance: Hydration–dehydration cycling induces fatigue-like degradation in enamel analogs, significantly compromising mechanical integrity. This model provides a reproducible, ethics-independent framework for studying environmental stress on enamel-like materials.
- Open Access
- 3 July 2026
- Published by MDPI AG in Preprints.org
Dental Emergencies in Wilderness, Military & Expedition Medicine: Prevention, Field Management, and Future Directions
The increasing popularity of wilderness recreation, expedition travel, military deployments, and scientific missions in remote environments has heightened the importance of medical preparedness for conditions that cannot be managed through immediate access to definitive healthcare. Although dental emergencies rarely threaten life directly, they may cause severe pain, impair nutrition and hydration, reduce operational performance, and necessitate premature evacuation, potentially compromising the success of an expedition or mission. Despite these consequences, dental emergencies remain comparatively underrepresented in the wilderness medicine literature. This narrative review summarizes the current evidence regarding the epidemiology, prevention, diagnosis, and field management of dental emergencies occurring in wilderness, expeditionary, military, maritime, and other austere environments. Evidence was synthesized from studies involving trekking expeditions, Antarctic research stations, military operations, and other isolated settings, together with relevant publications from emergency dentistry and travel medicine. Across these environments, dental caries and failed restorations consistently represent the leading causes of dental emergencies, followed by pulpal and periapical disease, periodontal infections, third molar pathology, traumatic dental injuries, and prosthodontic complications. Most emergencies are potentially preventable through appropriate pre-departure dental assessment and optimization of oral health. Furthermore, many conditions can be managed conservatively in the field using basic analgesia, temporary restorative materials, and simple emergency dental kits, whereas a smaller proportion require evacuation for definitive treatment. Current evidence is largely derived from observational military and expedition studies, with limited data from civilian wilderness expeditions.
- 3 July 2026
- Published by MDPI AG in Preprints.org
Open AccessDental Emergencies in Wilderness, Military & Expedition Medicine: Prevention, Field Management, and Future Directions
The increasing popularity of wilderness recreation, expedition travel, military deployments, and scientific missions in remote environments has heightened the importance of medical preparedness for conditions that cannot be managed through immediate access to definitive healthcare. Although dental emergencies rarely threaten life directly, they may cause severe pain, impair nutrition and hydration, reduce operational performance, and necessitate premature evacuation, potentially compromising the success of an expedition or mission. Despite these consequences, dental emergencies remain comparatively underrepresented in the wilderness medicine literature. This narrative review summarizes the current evidence regarding the epidemiology, prevention, diagnosis, and field management of dental emergencies occurring in wilderness, expeditionary, military, maritime, and other austere environments. Evidence was synthesized from studies involving trekking expeditions, Antarctic research stations, military operations, and other isolated settings, together with relevant publications from emergency dentistry and travel medicine. Across these environments, dental caries and failed restorations consistently represent the leading causes of dental emergencies, followed by pulpal and periapical disease, periodontal infections, third molar pathology, traumatic dental injuries, and prosthodontic complications. Most emergencies are potentially preventable through appropriate pre-departure dental assessment and optimization of oral health. Furthermore, many conditions can be managed conservatively in the field using basic analgesia, temporary restorative materials, and simple emergency dental kits, whereas a smaller proportion require evacuation for definitive treatment. Current evidence is largely derived from observational military and expedition studies, with limited data from civilian wilderness expeditions.
- Open Access
Hypoxic Modulation of Dental Pulp Stem Cells Viability: an In Vitro Study
Introduction: To investigate the effects of chronic hypoxic exposure simulating heavy-industrial environments on the viability, metabolic activity, stemness preservation, and osteogenic differentiation potential of human dental pulp stem cells (hDPSCs). Methods: Commercially available hDPSCs were cultured under controlled oxygen tensions representing surface atmospheric conditions (21% O 2 ), moderate hypoxia (10% O 2 ), deep hypoxia (5% O 2 ), and severe hypoxia (1% O 2 ). Cells were maintained for 1, 3, and 7 days. Cell viability was evaluated using MTT and Live/Dead assays. Reactive oxygen species (ROS) accumulation, mitochondrial membrane potential, and apoptosis were assessed using fluorescent probes and Annexin V/PI staining. Stemness marker expression (SOX2, OCT4, NANOG) and osteogenic markers (RUNX2, ALP, OCN) were analyzed via RT-qPCR. Results: Moderate hypoxia (10% O 2 ) promoted transient increases in stemness marker expression and preserved metabolic activity. Severe hypoxia (1% O 2 ) significantly reduced cell viability, increased ROS accumulation, disrupted mitochondrial integrity, and elevated apoptotic cell populations after prolonged exposure (p < 0.05). Osteogenic differentiation markers were significantly downregulated under severe hypoxic conditions. Conclusions: Industrial hypoxic environments critically influence pulpal stem cell physiology and regenerative potential. While moderate oxygen reduction may transiently preserve stemness characteristics, chronic severe hypoxia impairs viability and osteogenic functionality. Chronic low-oxygen occupational environments may alter endogenous dental regenerative mechanisms and influence oral tissue healing responses.
Open AccessHypoxic Modulation of Dental Pulp Stem Cells Viability: an In Vitro Study
Introduction: To investigate the effects of chronic hypoxic exposure simulating heavy-industrial environments on the viability, metabolic activity, stemness preservation, and osteogenic differentiation potential of human dental pulp stem cells (hDPSCs). Methods: Commercially available hDPSCs were cultured under controlled oxygen tensions representing surface atmospheric conditions (21% O 2 ), moderate hypoxia (10% O 2 ), deep hypoxia (5% O 2 ), and severe hypoxia (1% O 2 ). Cells were maintained for 1, 3, and 7 days. Cell viability was evaluated using MTT and Live/Dead assays. Reactive oxygen species (ROS) accumulation, mitochondrial membrane potential, and apoptosis were assessed using fluorescent probes and Annexin V/PI staining. Stemness marker expression (SOX2, OCT4, NANOG) and osteogenic markers (RUNX2, ALP, OCN) were analyzed via RT-qPCR. Results: Moderate hypoxia (10% O 2 ) promoted transient increases in stemness marker expression and preserved metabolic activity. Severe hypoxia (1% O 2 ) significantly reduced cell viability, increased ROS accumulation, disrupted mitochondrial integrity, and elevated apoptotic cell populations after prolonged exposure (p < 0.05). Osteogenic differentiation markers were significantly downregulated under severe hypoxic conditions. Conclusions: Industrial hypoxic environments critically influence pulpal stem cell physiology and regenerative potential. While moderate oxygen reduction may transiently preserve stemness characteristics, chronic severe hypoxia impairs viability and osteogenic functionality. Chronic low-oxygen occupational environments may alter endogenous dental regenerative mechanisms and influence oral tissue healing responses.
- Open Access
- 26 May 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Impact of Chronic Micro-Particulate Exposure on Enamel Microhardness: an in vitro Simulation Model of Combined Occupational Particulate Deposition and Abrasion
Objectives: This study investigated whether chronic exposure to industrial micro-particulates reduces enamel microhardness under simulated occupational conditions. Methods: Hydroxyapatite enamel an...
- 26 May 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessImpact of Chronic Micro-Particulate Exposure on Enamel Microhardness: an in vitro Simulation Model of Combined Occupational Particulate Deposition and Abrasion
Objectives: This study investigated whether chronic exposure to industrial micro-particulates reduces enamel microhardness under simulated occupational conditions. Methods: Hydroxyapatite enamel an...
- Open Access
Bioluminescent Peptide-Based Biosensors for Early Enamel Demineralization: An In Vitro Proof-of-Concept
Background: Early enamel demineralization corresponding to ICDAS 0–1 is difficult to detect through routine visual-tactile examination, as initial mineral loss often precedes visible surface change. Existing optical adjuncts improve detection but frequently require specialized equipment, high costs, or ionizing radiation, limiting widespread clinical use. Objective: To develop a low-cost, luciferin-inspired fluorogenic peptide biosensor capable of selectively binding early enamel porosity and producing a quantifiable green luminescent signal under standard dental blue-light activation. Methods: A calcium-affinitive peptide (P-Ca) was synthesized and functionalized with an inexpensive fluorogenic ester–quencher pair that becomes fluorescent upon conformational stabilization on partially demineralized enamel. Thirty extracted molars, collected as anonymized biowaste from orthodontic procedures, were sectioned and assigned to sound enamel, mild demineralization (pH-cycling, 48 h), or moderate demineralization (96 h). After 60 s incubation with P-Ca, specimens were illuminated using a dental curing light (450–470 nm). Emission spectra (λ_max 515 ± 5 nm) and fluorescence intensities were quantified and compared with quantitative light-induced fluorescence (QLF). Cytocompatibility was evaluated using an immortalized human gingival fibroblasts cell line (HGF-1). Results: Fluorescence intensity increased in accordance with demineralization severity (p < 0.001), and luminescent output strongly correlated with QLF ΔF values (p < 0.001). HGF-1 viability remained above 95% after 24 h exposure. Conclusion: This in vitro study supports the feasibility of a fluorogenic peptide biosensor as an inexpensive, non-radiographic adjunct for early enamel demineralization detection, with clear potential for future chairside translation.
Open AccessBioluminescent Peptide-Based Biosensors for Early Enamel Demineralization: An In Vitro Proof-of-Concept
Background: Early enamel demineralization corresponding to ICDAS 0–1 is difficult to detect through routine visual-tactile examination, as initial mineral loss often precedes visible surface change. Existing optical adjuncts improve detection but frequently require specialized equipment, high costs, or ionizing radiation, limiting widespread clinical use. Objective: To develop a low-cost, luciferin-inspired fluorogenic peptide biosensor capable of selectively binding early enamel porosity and producing a quantifiable green luminescent signal under standard dental blue-light activation. Methods: A calcium-affinitive peptide (P-Ca) was synthesized and functionalized with an inexpensive fluorogenic ester–quencher pair that becomes fluorescent upon conformational stabilization on partially demineralized enamel. Thirty extracted molars, collected as anonymized biowaste from orthodontic procedures, were sectioned and assigned to sound enamel, mild demineralization (pH-cycling, 48 h), or moderate demineralization (96 h). After 60 s incubation with P-Ca, specimens were illuminated using a dental curing light (450–470 nm). Emission spectra (λ_max 515 ± 5 nm) and fluorescence intensities were quantified and compared with quantitative light-induced fluorescence (QLF). Cytocompatibility was evaluated using an immortalized human gingival fibroblasts cell line (HGF-1). Results: Fluorescence intensity increased in accordance with demineralization severity (p < 0.001), and luminescent output strongly correlated with QLF ΔF values (p < 0.001). HGF-1 viability remained above 95% after 24 h exposure. Conclusion: This in vitro study supports the feasibility of a fluorogenic peptide biosensor as an inexpensive, non-radiographic adjunct for early enamel demineralization detection, with clear potential for future chairside translation.
- Open Access
- 17 February 2026
- Published by Frontiers Media SA in Frontiers in Physiology
- Vol. 17, 1743209
Visible-light–triggered BMP-2 release from enzymatically crosslinked marine collagen–alginate hydrogel blends enhances osteogenesis in dental pulp stem cells
Objectives: Achieving spatiotemporal control over osteoinductive signaling remains a key challenge in craniofacial tissue engineering. Conventional BMP-2 delivery from photocrosslinked hydrogels often leads to uncontrolled burst release and cytotoxic by-products from radical initiators. Here, we designed an enzymatically crosslinked marine collagen–alginate hydrogel blend that enables visible-light–triggered, on-demand release of BMP-2 while promoting oxygen diffusion through leachable porosity. Methods: Marine collagen functionalized with thiol groups (collagen-SH) was crosslinked by microbial transglutaminase (mTG) under physiological conditions, avoiding light-initiated polymerization. Recombinant BMP-2 was conjugated via a coumarin-based 405 nm–cleavable linker (BMP-2_pc) and covalently tethered to the collagen network. Non-crosslinked sodium alginate (0.6% w/v) was incorporated as a sacrificial porogen to create micropores upon diffusion. DPSC were encapsulated (1.5 × 10 6 cells/mL) and subjected to daily blue-LED pulses (405 ± 10 nm, 25 mW cm −2 , 60 s) for up to 14 days. BMP-2 release (ELISA), porosity (SEM), oxygen diffusivity (Clark microelectrode), viability, and osteogenic differentiation (ALP, qPCR, Alizarin Red) were assessed. Results: Blue-light stimulation induced stepwise BMP-2 release (≈23% per pulse; 60% cumulative at 72 h), while mTG crosslinking preserved coumarin integrity. Alginate leaching generated an interconnected microporosity (20–60 µm pores) and increased oxygen diffusion coefficient by 42% ± 9%. DPSC viability remained >90%. Light-pulsed composites exhibited 2.4-fold ALP activity and 2.8-fold higher mineral deposition versus dark controls (p < 0.01). Conclusion: The orthogonally crosslinked marine collagen–alginate composite supports visible-light–controlled BMP-2 delivery and oxygen-enhanced osteogenesis without photoinitiator toxicity. This platform provides a modular, sustainable route toward clinically programmable scaffolds for dental and craniofacial regeneration.
- 17 February 2026
- Published by Frontiers Media SA in Frontiers in Physiology
- Vol. 17, 1743209
Open AccessVisible-light–triggered BMP-2 release from enzymatically crosslinked marine collagen–alginate hydrogel blends enhances osteogenesis in dental pulp stem cells
Objectives: Achieving spatiotemporal control over osteoinductive signaling remains a key challenge in craniofacial tissue engineering. Conventional BMP-2 delivery from photocrosslinked hydrogels often leads to uncontrolled burst release and cytotoxic by-products from radical initiators. Here, we designed an enzymatically crosslinked marine collagen–alginate hydrogel blend that enables visible-light–triggered, on-demand release of BMP-2 while promoting oxygen diffusion through leachable porosity. Methods: Marine collagen functionalized with thiol groups (collagen-SH) was crosslinked by microbial transglutaminase (mTG) under physiological conditions, avoiding light-initiated polymerization. Recombinant BMP-2 was conjugated via a coumarin-based 405 nm–cleavable linker (BMP-2_pc) and covalently tethered to the collagen network. Non-crosslinked sodium alginate (0.6% w/v) was incorporated as a sacrificial porogen to create micropores upon diffusion. DPSC were encapsulated (1.5 × 10 6 cells/mL) and subjected to daily blue-LED pulses (405 ± 10 nm, 25 mW cm −2 , 60 s) for up to 14 days. BMP-2 release (ELISA), porosity (SEM), oxygen diffusivity (Clark microelectrode), viability, and osteogenic differentiation (ALP, qPCR, Alizarin Red) were assessed. Results: Blue-light stimulation induced stepwise BMP-2 release (≈23% per pulse; 60% cumulative at 72 h), while mTG crosslinking preserved coumarin integrity. Alginate leaching generated an interconnected microporosity (20–60 µm pores) and increased oxygen diffusion coefficient by 42% ± 9%. DPSC viability remained >90%. Light-pulsed composites exhibited 2.4-fold ALP activity and 2.8-fold higher mineral deposition versus dark controls (p < 0.01). Conclusion: The orthogonally crosslinked marine collagen–alginate composite supports visible-light–controlled BMP-2 delivery and oxygen-enhanced osteogenesis without photoinitiator toxicity. This platform provides a modular, sustainable route toward clinically programmable scaffolds for dental and craniofacial regeneration.
- Open Access
- 6 February 2026
- Published by Elsevier in Journal of Dental Sciences
Optogenetic control of odontoblastic differentiation in dental pulp stem cells (DPSC)
- 6 February 2026
- Published by Elsevier in Journal of Dental Sciences
Open AccessOptogenetic control of odontoblastic differentiation in dental pulp stem cells (DPSC)
- Open Access
- 23 September 2025
- Published by Wiley in International Endodontic Journal
- Vol. 59 (1) , 105-118
Long‐Term Biobanked Dental Pulp Stem Cells Retain Angiogenic Potential for Vascularised Tissue Engineering—Laboratory Investigation
Aim: This study aimed to evaluate whether human dental pulp stem cells (DPSCs), after long‐term biobanking (7–8 years), retain their pro‐angiogenic properties and can be used to engineer vascularised tissues, addressing their potential for clinical translation in regenerative dentistry. Methodology: Cryopreserved DPSCs from adolescent donors were recovered from biobanking and characterised for chromosomal integrity, MSC immunophenotype and multipotency. After conditioning in pro‐angiogenic conditions in vitro, gene and protein expression were analysed by RT‐qPCR array, flow cytometry and high‐throughput immunophenotyping. Functional angiogenic capacity was assessed via in vitro tube formation, ex ovo CAM implantation assay, organ‐on‐chip perfusion model and long‐term culture (45 days) in clinical‐grade GelMA hydrogels, with and without HUVECs. Results: Biobanked DPSCs retained MSC identity and multi‐lineage differentiation potential. Pro‐angiogenic/endothelial conditioning enhanced the expression of angiogenic/endothelial genes (PECAM1, VEGFR2, NRP1, ACE), yet most cells maintained a pericyte‐like phenotype. Both naive and endothelial‐conditioned DPSCs (i.e., naiveDPSCs and endoDPSCs, respectively) significantly enhanced vascular ingrowth in the CAM model. In the organ‐on‐chip system, naiveDPSCs formed perfusable vasculature with HUVECs and differentiated into perivascular cell types. Most notably, endoDPSCs alone successfully generated vascularised tissue with both CD31(+) and αSMA(+) cells present in GelMA hydrogels after prolonged stimulation. Conclusion: Long‐term biobanked DPSCs preserve their angiogenic potential and, following extended endothelial induction, can independently generate vascularised tissue in 3D in vitro culture models. This is the first report demonstrating the comprehensive pro‐angiogenic characterisation and the feasibility of using biobanked DPSCs for vascularised tissue engineering, highlighting their strong clinical applicability for future regenerative therapies.
- 23 September 2025
- Published by Wiley in International Endodontic Journal
- Vol. 59 (1) , 105-118
Open AccessLong‐Term Biobanked Dental Pulp Stem Cells Retain Angiogenic Potential for Vascularised Tissue Engineering—Laboratory Investigation
Aim: This study aimed to evaluate whether human dental pulp stem cells (DPSCs), after long‐term biobanking (7–8 years), retain their pro‐angiogenic properties and can be used to engineer vascularised tissues, addressing their potential for clinical translation in regenerative dentistry. Methodology: Cryopreserved DPSCs from adolescent donors were recovered from biobanking and characterised for chromosomal integrity, MSC immunophenotype and multipotency. After conditioning in pro‐angiogenic conditions in vitro, gene and protein expression were analysed by RT‐qPCR array, flow cytometry and high‐throughput immunophenotyping. Functional angiogenic capacity was assessed via in vitro tube formation, ex ovo CAM implantation assay, organ‐on‐chip perfusion model and long‐term culture (45 days) in clinical‐grade GelMA hydrogels, with and without HUVECs. Results: Biobanked DPSCs retained MSC identity and multi‐lineage differentiation potential. Pro‐angiogenic/endothelial conditioning enhanced the expression of angiogenic/endothelial genes (PECAM1, VEGFR2, NRP1, ACE), yet most cells maintained a pericyte‐like phenotype. Both naive and endothelial‐conditioned DPSCs (i.e., naiveDPSCs and endoDPSCs, respectively) significantly enhanced vascular ingrowth in the CAM model. In the organ‐on‐chip system, naiveDPSCs formed perfusable vasculature with HUVECs and differentiated into perivascular cell types. Most notably, endoDPSCs alone successfully generated vascularised tissue with both CD31(+) and αSMA(+) cells present in GelMA hydrogels after prolonged stimulation. Conclusion: Long‐term biobanked DPSCs preserve their angiogenic potential and, following extended endothelial induction, can independently generate vascularised tissue in 3D in vitro culture models. This is the first report demonstrating the comprehensive pro‐angiogenic characterisation and the feasibility of using biobanked DPSCs for vascularised tissue engineering, highlighting their strong clinical applicability for future regenerative therapies.
- Open Access
- 16 April 2025
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 37 (9) , 3284-3294
Injectable Dendritic Hydrogels Curable by High-Energy Visible Light for Cell Delivery in Bone Regeneration
- 16 April 2025
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 37 (9) , 3284-3294
Open AccessInjectable Dendritic Hydrogels Curable by High-Energy Visible Light for Cell Delivery in Bone Regeneration