Zeyuan Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zeyuan Liu has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Sanming Du
National United Engineering Laboratory for Advanced Bearing Tribology, Henan University of Science and Technology, Luoyang 471000, China
2 shared publications - Tiantian He
National United Engineering Laboratory for Advanced Bearing Tribology, Henan University of Science and Technology, Luoyang 471000, China
2 shared publications - Yongzhen Zhang
National United Engineering Laboratory for Advanced Bearing Tribology, Henan University of Science and Technology, Luoyang 471023, China
2 shared publications - Gaoang Song
National United Engineering Laboratory for Advanced Bearing Tribology, Henan University of Science and Technology, Luoyang 471023, China
1 shared publication - Jie Tian
National United Engineering Laboratory for Advanced Bearing Tribology, Henan University of Science and Technology, Luoyang 471023, China
1 shared publication - Wenbo Chen
National United Engineering Laboratory for Advanced Bearing Tribology, Henan University of Science and Technology, Luoyang 471000, China
1 shared publication
Latest Publications
- Open Access
- 18 April 2025
- Published by MDPI AG in Lubricants
- Vol. 13 (4) , 187
The Impact of Surface Roughness on the Friction and Wear Performance of GCr15 Bearing Steel
Surface roughness plays a crucial role in determining surface quality, influencing factors such as vibration, noise, assembly precision, lubrication, and wear resistance in bearings. This research examines how surface roughness (Sa) affects the friction and wear characteristics of GCr15 steel under conditions with adequate oil lubrication while varying the applied load. The findings indicate that with an increase in Sa, the friction coefficient of GCr15 steel also increases. As the load rises from 15 N to 35 N, the friction coefficient remains relatively constant. However, higher loads lead to more severe wear of the microprotrusions on the surface of GCr15 steel. The wear area first decreases and then increases as Sa increases. The minimum wear area occurs when Sa is 0.5 μm. Additionally, a back propagation neural network (BPNN) model has been developed to predict the wear performance of GCr15 steel. Validation experiments show that the average prediction error for the BPNN model is 10.64%.
- 18 April 2025
- Published by MDPI AG in Lubricants
- Vol. 13 (4) , 187
Open AccessThe Impact of Surface Roughness on the Friction and Wear Performance of GCr15 Bearing Steel
Surface roughness plays a crucial role in determining surface quality, influencing factors such as vibration, noise, assembly precision, lubrication, and wear resistance in bearings. This research examines how surface roughness (Sa) affects the friction and wear characteristics of GCr15 steel under conditions with adequate oil lubrication while varying the applied load. The findings indicate that with an increase in Sa, the friction coefficient of GCr15 steel also increases. As the load rises from 15 N to 35 N, the friction coefficient remains relatively constant. However, higher loads lead to more severe wear of the microprotrusions on the surface of GCr15 steel. The wear area first decreases and then increases as Sa increases. The minimum wear area occurs when Sa is 0.5 μm. Additionally, a back propagation neural network (BPNN) model has been developed to predict the wear performance of GCr15 steel. Validation experiments show that the average prediction error for the BPNN model is 10.64%.
- Open Access
Comparative Analysis of the Microstructure and Tribological Behaviors of Ni-, Fe-, and Co-Based Plasma Cladding Coatings
Nickel-, iron-, and cobalt-based alloy coatings were fabricated on the surface of U75V steel utilizing plasma cladding technology. This study investigates the microstructure, mechanical properties, and tribological performance of the coatings. The findings reveal that the microstructure of the coatings predominantly consists of dendritic and eutectic structures. The surface microstructure exhibited a dense, continuous, and uniform morphology. Following the cladding process, the samples were characterized by residual compressive stress. In comparison to the substrate, the hardness of the Ni-, Fe-, and Co-based coatings increased by 141%, 101%, and 44%, respectively; the wear rates of these coatings decreased by 36.6%, 22.1%, and 11.7%, respectively. The wear mechanisms of the Ni- and Fe-based coatings were predominantly adhesive wear; however, the extent of adhesive wear of the Fe-based coating was more obvious than that of the Ni-based coating. By contrast, the Co-based coating exhibited abrasive wear, which was the most severe among the three types of coatings. Additionally, the Ni-based coating demonstrated the lowest friction coefficient and wear rate, thereby exhibiting superior wear resistance compared to the other two coatings.
Open AccessComparative Analysis of the Microstructure and Tribological Behaviors of Ni-, Fe-, and Co-Based Plasma Cladding Coatings
Nickel-, iron-, and cobalt-based alloy coatings were fabricated on the surface of U75V steel utilizing plasma cladding technology. This study investigates the microstructure, mechanical properties, and tribological performance of the coatings. The findings reveal that the microstructure of the coatings predominantly consists of dendritic and eutectic structures. The surface microstructure exhibited a dense, continuous, and uniform morphology. Following the cladding process, the samples were characterized by residual compressive stress. In comparison to the substrate, the hardness of the Ni-, Fe-, and Co-based coatings increased by 141%, 101%, and 44%, respectively; the wear rates of these coatings decreased by 36.6%, 22.1%, and 11.7%, respectively. The wear mechanisms of the Ni- and Fe-based coatings were predominantly adhesive wear; however, the extent of adhesive wear of the Fe-based coating was more obvious than that of the Ni-based coating. By contrast, the Co-based coating exhibited abrasive wear, which was the most severe among the three types of coatings. Additionally, the Ni-based coating demonstrated the lowest friction coefficient and wear rate, thereby exhibiting superior wear resistance compared to the other two coatings.