Jiashu Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jiashu Chen has a total of 131 co-authors. Here are the top co-authors by number of shared publications:
- Jingyu Sun
Soochow University
10 shared publications - Guang-Ping Zheng
Department of Mechanical Engineering, Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China
8 shared publications - Xinzhong Wang
Department of Mechanical Engineering, Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China
8 shared publications Yiwen Su
Department of Mechanical Engineering, Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China
8 shared publicationsJie Liu
College of Semiconductors (College of Integrated Circuits) Hunan University Changsha 410082 China
5 shared publications- Shi Xue Dou
Institute of Energy Materials Science University of Shanghai for Science and Technology Shanghai China
5 shared publications
Latest Publications
- Open Access
- 19 October 2026
- Published by Wiley in Advanced Functional Materials
- p. e79123
Phase Diagram and Theoretical Calculation Guided Rational Design of Cu 6.26 Sn 5 /Sn Heterostructured Aerogel for Hydroxylamine Electrosynthesis
Electrosynthesizing hydroxylamine (NH 2 OH) from nitrite (NO 2 − ) promises a green alternative to the hazardous Raschig process, yet catalyst development is trapped in a persistent selectivity–activity dilemma. Excessively strong adsorption of intermediates on the catalyst drives the over‑reduction of * NH 2 OH to ammonia, whereas overly weak adsorption depletes the interfacial reactant supply and yields to the competing hydrogen evolution reaction. Herein, guided by binary phase diagrams and density functional theory calculations, we report a one‐step co‐reduction strategy for the general synthesis of 3D intermetallic/metal heterostructured aerogels with freely tunable components—bypassing the sacrificial templates required by conventional methods. The resultant aerogel comprises a porous Sn scaffold decorated with Cu 6.26 Sn 5 intermetallic nanoparticles that form stable heterointerfaces. With cyclohexanone trapping in 0.5 m Na 2 SO 4 , the Cu 10 Sn 90 heterostructured aerogel achieves a remarkable Faradaic efficiency of 79.7% and yield rate of 0.731 mmol h −1 cm −2 toward cyclohexanone oxime. Molecular dynamics simulations reveal that the Cu 6.26 Sn 5 phase accelerates interfacial NO 2 − accumulation and mass transport, whereas the Sn scaffold serves as the dominant active center to undergo the reduction of NO 2 − and boost * NH 2 OH desorption. This study delivers a novel material design strategy for heterostructured aerogels toward highly selective electroreduction of NO 2 − to NH 2 OH.
- 19 October 2026
- Published by Wiley in Advanced Functional Materials
- p. e79123
Open AccessPhase Diagram and Theoretical Calculation Guided Rational Design of Cu 6.26 Sn 5 /Sn Heterostructured Aerogel for Hydroxylamine Electrosynthesis
Electrosynthesizing hydroxylamine (NH 2 OH) from nitrite (NO 2 − ) promises a green alternative to the hazardous Raschig process, yet catalyst development is trapped in a persistent selectivity–activity dilemma. Excessively strong adsorption of intermediates on the catalyst drives the over‑reduction of * NH 2 OH to ammonia, whereas overly weak adsorption depletes the interfacial reactant supply and yields to the competing hydrogen evolution reaction. Herein, guided by binary phase diagrams and density functional theory calculations, we report a one‐step co‐reduction strategy for the general synthesis of 3D intermetallic/metal heterostructured aerogels with freely tunable components—bypassing the sacrificial templates required by conventional methods. The resultant aerogel comprises a porous Sn scaffold decorated with Cu 6.26 Sn 5 intermetallic nanoparticles that form stable heterointerfaces. With cyclohexanone trapping in 0.5 m Na 2 SO 4 , the Cu 10 Sn 90 heterostructured aerogel achieves a remarkable Faradaic efficiency of 79.7% and yield rate of 0.731 mmol h −1 cm −2 toward cyclohexanone oxime. Molecular dynamics simulations reveal that the Cu 6.26 Sn 5 phase accelerates interfacial NO 2 − accumulation and mass transport, whereas the Sn scaffold serves as the dominant active center to undergo the reduction of NO 2 − and boost * NH 2 OH desorption. This study delivers a novel material design strategy for heterostructured aerogels toward highly selective electroreduction of NO 2 − to NH 2 OH.
- 23 September 2026
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 28 (36) , 22579-22591
Atomistic simulation of boron implantation and defect-mediated diffusion in silicon via DFT-MD and deep potential molecular dynamics
DFT-MD and deep potential simulations reveal how implantation-induced self-interstitials drive kick-out-mediated boron diffusion, enabling accurate prediction of post-annealing dopant profiles in silicon.
- 23 September 2026
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 28 (36) , 22579-22591
Atomistic simulation of boron implantation and defect-mediated diffusion in silicon via DFT-MD and deep potential molecular dynamics
DFT-MD and deep potential simulations reveal how implantation-induced self-interstitials drive kick-out-mediated boron diffusion, enabling accurate prediction of post-annealing dopant profiles in silicon.
- Open Access
- 21 September 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (62) , e75114
Single‐Crystal Zn Anodes Affording Full‐Dimensional Crystallographic Coherence Enabled by Monolayer Graphene‐Skinned Cu(111) Substrate
Aqueous Zn metal batteries are promising candidates for large‐scale energy storage, yet their practical deployment is hindered by poor Zn reversibility. Although crystallographic engineering can improve Zn electrochemistry, the precise fabrication of single‐crystal Zn electrodes with full‐dimensional crystallographic coherence remains elusive. Here we report a remote electro‐epitaxy (REE) strategy to render high‐quality single‐crystal Zn electrodes. Using monolayer graphene‐skinned Cu(111) substrate as the epitaxial current collector, REE manages to preserve perfect crystallographic inheritance through substrate‐potential transmission and accommodate lattice mismatch via interfacial strain relaxation, which is evidenced by theoretical and instrumental characterizations. As a result, the Zn(002) deposits with uniform out‐of‐plane crystallographic orientation, in‐plane crystallographic coherence, and through‐thickness crystallographic continuity are achieved on both centimeter‐scale foils and 4‐inch wafer substrates. The resulting electrodes warrant reversible Zn plating/stripping behavior, enhanced stability under elevated depth‐of‐discharge conditions, and successful implementation in Ah‐scale pouch cells competing the state‐of‐the‐art. Beyond Zn, our strategy is extendable to a multitude of metals, offering a scalable pathway toward single‐crystal electrode fabrication for emerging energy storage.
- 21 September 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (62) , e75114
Open AccessSingle‐Crystal Zn Anodes Affording Full‐Dimensional Crystallographic Coherence Enabled by Monolayer Graphene‐Skinned Cu(111) Substrate
Aqueous Zn metal batteries are promising candidates for large‐scale energy storage, yet their practical deployment is hindered by poor Zn reversibility. Although crystallographic engineering can improve Zn electrochemistry, the precise fabrication of single‐crystal Zn electrodes with full‐dimensional crystallographic coherence remains elusive. Here we report a remote electro‐epitaxy (REE) strategy to render high‐quality single‐crystal Zn electrodes. Using monolayer graphene‐skinned Cu(111) substrate as the epitaxial current collector, REE manages to preserve perfect crystallographic inheritance through substrate‐potential transmission and accommodate lattice mismatch via interfacial strain relaxation, which is evidenced by theoretical and instrumental characterizations. As a result, the Zn(002) deposits with uniform out‐of‐plane crystallographic orientation, in‐plane crystallographic coherence, and through‐thickness crystallographic continuity are achieved on both centimeter‐scale foils and 4‐inch wafer substrates. The resulting electrodes warrant reversible Zn plating/stripping behavior, enhanced stability under elevated depth‐of‐discharge conditions, and successful implementation in Ah‐scale pouch cells competing the state‐of‐the‐art. Beyond Zn, our strategy is extendable to a multitude of metals, offering a scalable pathway toward single‐crystal electrode fabrication for emerging energy storage.
- 18 August 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (75)
High Entropy Oxynitride for Anti‐Poisoning Electrocatalytic Nitrogen Reduction
Electrocatalytic nitrogen reduction reaction (eNRR) under ambient conditions is a promising route for sustainable ammonia synthesis, yet its progress is fundamentally limited by the inertness of N≡N bonds and the lack of robust, selective catalysts. Here, we report the first synthesis of a rutile‐structured high‐entropy oxynitride (HEON, CoFeTiVSnON). By leveraging the mixing entropy of five metal elements and dual anion regulation, HEON achieves dynamically regenerable nitrogen vacancies, and a tunable electronic structure. Operando spectroscopic investigations and density functional theory (DFT) calculations reveal that HEON uniquely activates N 2 via a stabilized vacancy‐mediated quasi Mars‐van Krevelen (MvK) mechanism, wherein nitrogen vacancies directly participate in the catalytic cycle, enabling continuous vacancy formation and healing. Correspondingly, the NH 3 poisoning and vacancy depletion issues that plague conventional binary nitrides have been circumvented whilst breaking linear scaling relationship of intermediate adsorption. The HEON catalyst delivers a high NH 3 yield rate of 159.2 µg h −1 mg cat. −1 and a Faradaic efficiency of 46.6% at −0.5 V vs. RHE, with good structural stability over extended operation. Our work establishes high‐entropy oxynitrides as a transformative platform for multi‐step electrocatalysis, and provides mechanistic insights for the rational design of catalysts stabilized by high entropy effects.
- 18 August 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (75)
High Entropy Oxynitride for Anti‐Poisoning Electrocatalytic Nitrogen Reduction
Electrocatalytic nitrogen reduction reaction (eNRR) under ambient conditions is a promising route for sustainable ammonia synthesis, yet its progress is fundamentally limited by the inertness of N≡N bonds and the lack of robust, selective catalysts. Here, we report the first synthesis of a rutile‐structured high‐entropy oxynitride (HEON, CoFeTiVSnON). By leveraging the mixing entropy of five metal elements and dual anion regulation, HEON achieves dynamically regenerable nitrogen vacancies, and a tunable electronic structure. Operando spectroscopic investigations and density functional theory (DFT) calculations reveal that HEON uniquely activates N 2 via a stabilized vacancy‐mediated quasi Mars‐van Krevelen (MvK) mechanism, wherein nitrogen vacancies directly participate in the catalytic cycle, enabling continuous vacancy formation and healing. Correspondingly, the NH 3 poisoning and vacancy depletion issues that plague conventional binary nitrides have been circumvented whilst breaking linear scaling relationship of intermediate adsorption. The HEON catalyst delivers a high NH 3 yield rate of 159.2 µg h −1 mg cat. −1 and a Faradaic efficiency of 46.6% at −0.5 V vs. RHE, with good structural stability over extended operation. Our work establishes high‐entropy oxynitrides as a transformative platform for multi‐step electrocatalysis, and provides mechanistic insights for the rational design of catalysts stabilized by high entropy effects.
- 13 August 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (41) , e9873433
Chlorination‐Induced Symmetry Breaking in Cu Single‐Atom Sites for Boosting Electrocatalytic Nitrate Reduction to Ammonia
Electrochemical nitrate reduction to ammonia is attractive for green fertilizer synthesis and pollution remediation, yet its performance is normally hindered by the mismatched generation and consumption of active hydrogen (*H). Here, we engineer the planar chloride coordination to break the local symmetry of Cu single atoms over oxygen‐deficient WO 3‐x , forming Cu 1 Cl–WO 3‐ x with Cu–O/Cl and Cu–Cl–W motifs to enable dual interfacial relay of *H and *NO 2 derived intermediates. The Cu 1 Cl–WO 3‐ x catalyst achieves an NH 3 Faradaic efficiency of 99.7% at −0.8 V versus the reversible hydrogen electrode and delivers an NH 3 yield rate up to 63.6 mg h −1 cm −2 at −0.9 V with stable operation. In situ electrochemical characterization and theoretical calculations reveal that the asymmetric Cu–Cl–W interface promotes water dissociation and *H relay, while facilitating thermodynamically favorable *NO 2 relocation and subsequent hydrogenation, thereby shifting the potential‐determining step and lowering the overall energy barrier. This dual‐relay strategy might offer a generic route toward efficient NO 3 − ‐to‐NH 3 electrosynthesis.
- 13 August 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (41) , e9873433
Chlorination‐Induced Symmetry Breaking in Cu Single‐Atom Sites for Boosting Electrocatalytic Nitrate Reduction to Ammonia
Electrochemical nitrate reduction to ammonia is attractive for green fertilizer synthesis and pollution remediation, yet its performance is normally hindered by the mismatched generation and consumption of active hydrogen (*H). Here, we engineer the planar chloride coordination to break the local symmetry of Cu single atoms over oxygen‐deficient WO 3‐x , forming Cu 1 Cl–WO 3‐ x with Cu–O/Cl and Cu–Cl–W motifs to enable dual interfacial relay of *H and *NO 2 derived intermediates. The Cu 1 Cl–WO 3‐ x catalyst achieves an NH 3 Faradaic efficiency of 99.7% at −0.8 V versus the reversible hydrogen electrode and delivers an NH 3 yield rate up to 63.6 mg h −1 cm −2 at −0.9 V with stable operation. In situ electrochemical characterization and theoretical calculations reveal that the asymmetric Cu–Cl–W interface promotes water dissociation and *H relay, while facilitating thermodynamically favorable *NO 2 relocation and subsequent hydrogenation, thereby shifting the potential‐determining step and lowering the overall energy barrier. This dual‐relay strategy might offer a generic route toward efficient NO 3 − ‐to‐NH 3 electrosynthesis.
- 12 August 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (41) , e9873433
Chlorination‐Induced Symmetry Breaking in Cu Single‐Atom Sites for Boosting Electrocatalytic Nitrate Reduction to Ammonia
Electrochemical nitrate reduction to ammonia is attractive for green fertilizer synthesis and pollution remediation, yet its performance is normally hindered by the mismatched generation and consumption of active hydrogen (*H). Here, we engineer the planar chloride coordination to break the local symmetry of Cu single atoms over oxygen‐deficient WO 3‐x , forming Cu 1 Cl–WO 3‐ x with Cu–O/Cl and Cu–Cl–W motifs to enable dual interfacial relay of *H and *NO 2 derived intermediates. The Cu 1 Cl–WO 3‐ x catalyst achieves an NH 3 Faradaic efficiency of 99.7% at −0.8 V versus the reversible hydrogen electrode and delivers an NH 3 yield rate up to 63.6 mg h −1 cm −2 at −0.9 V with stable operation. In situ electrochemical characterization and theoretical calculations reveal that the asymmetric Cu–Cl–W interface promotes water dissociation and *H relay, while facilitating thermodynamically favorable *NO 2 relocation and subsequent hydrogenation, thereby shifting the potential‐determining step and lowering the overall energy barrier. This dual‐relay strategy might offer a generic route toward efficient NO 3 − ‐to‐NH 3 electrosynthesis.
- 12 August 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (41) , e9873433
Chlorination‐Induced Symmetry Breaking in Cu Single‐Atom Sites for Boosting Electrocatalytic Nitrate Reduction to Ammonia
Electrochemical nitrate reduction to ammonia is attractive for green fertilizer synthesis and pollution remediation, yet its performance is normally hindered by the mismatched generation and consumption of active hydrogen (*H). Here, we engineer the planar chloride coordination to break the local symmetry of Cu single atoms over oxygen‐deficient WO 3‐x , forming Cu 1 Cl–WO 3‐ x with Cu–O/Cl and Cu–Cl–W motifs to enable dual interfacial relay of *H and *NO 2 derived intermediates. The Cu 1 Cl–WO 3‐ x catalyst achieves an NH 3 Faradaic efficiency of 99.7% at −0.8 V versus the reversible hydrogen electrode and delivers an NH 3 yield rate up to 63.6 mg h −1 cm −2 at −0.9 V with stable operation. In situ electrochemical characterization and theoretical calculations reveal that the asymmetric Cu–Cl–W interface promotes water dissociation and *H relay, while facilitating thermodynamically favorable *NO 2 relocation and subsequent hydrogenation, thereby shifting the potential‐determining step and lowering the overall energy barrier. This dual‐relay strategy might offer a generic route toward efficient NO 3 − ‐to‐NH 3 electrosynthesis.
- Open Access
- 4 August 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Society Reviews
- Vol. 55 (15) , 8157-8181
Mechanochemical strategies for environmental remediation and resource recovery
Mechanochemistry uses mechanical force to convert solid wastes and gaseous feedstocks into high-value chemicals, offering a route for environmental remediation and resource recovery.
- 4 August 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Society Reviews
- Vol. 55 (15) , 8157-8181
Open AccessMechanochemical strategies for environmental remediation and resource recovery
Mechanochemistry uses mechanical force to convert solid wastes and gaseous feedstocks into high-value chemicals, offering a route for environmental remediation and resource recovery.
- 8 May 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (26) , e6295065
Grain‐Oriented Dissolution Enabled by Hydrogel for Highly Reversible Zn Anodes
The reversibility of Zn anodes is severely compromised by dendritic growth and parasitic hydrogen evolution reactions. Directing Zn to undergo grain‐oriented stripping offers an effective approach to mitigating these issues. However, this strategy has rarely been explored, and the underlying mechanism remains unclear. Herein, we design a multifunctional hydrogel composed of aramid nanofiber‐polyvinyl alcohol (ANF‐PVA) and calcium lignosulfonate (LS) to dynamically regulate the anode interface. The ANF‐PVA hydrogel framework possesses excellent mechanical stability and a uniform porous structure that promotes a homogeneous electric field distribution. Concurrently, the incorporated LS preferentially adsorbs onto specific Zn crystal planes, which equilibrates the stripping energy barrier. Through the synergistic regulation between ANF‐PVA and LS, grain‐oriented dissolution is achieved. The in situ formed solid electrolyte interphase (SEI) can further guide uniform Zn deposition and effectively suppress side reactions. Consequently, Zn||Zn symmetric cells exhibit exceptional cycling stability under both ambient (5000 h at 2 mA cm −2 /1 mAh cm −2 ) and low‐temperature conditions (10 900 h at −40 °C). The Zn||I 2 full cell achieves 78.2% capacity retention after 20 000 cycles at 5 A g −1 . Remarkably, pouch‐type cells also sustain 700 cycles. This work opens a new avenue for achieving highly reversible Zn anodes through grain‐oriented dissolution.
- 8 May 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (26) , e6295065
Grain‐Oriented Dissolution Enabled by Hydrogel for Highly Reversible Zn Anodes
The reversibility of Zn anodes is severely compromised by dendritic growth and parasitic hydrogen evolution reactions. Directing Zn to undergo grain‐oriented stripping offers an effective approach to mitigating these issues. However, this strategy has rarely been explored, and the underlying mechanism remains unclear. Herein, we design a multifunctional hydrogel composed of aramid nanofiber‐polyvinyl alcohol (ANF‐PVA) and calcium lignosulfonate (LS) to dynamically regulate the anode interface. The ANF‐PVA hydrogel framework possesses excellent mechanical stability and a uniform porous structure that promotes a homogeneous electric field distribution. Concurrently, the incorporated LS preferentially adsorbs onto specific Zn crystal planes, which equilibrates the stripping energy barrier. Through the synergistic regulation between ANF‐PVA and LS, grain‐oriented dissolution is achieved. The in situ formed solid electrolyte interphase (SEI) can further guide uniform Zn deposition and effectively suppress side reactions. Consequently, Zn||Zn symmetric cells exhibit exceptional cycling stability under both ambient (5000 h at 2 mA cm −2 /1 mAh cm −2 ) and low‐temperature conditions (10 900 h at −40 °C). The Zn||I 2 full cell achieves 78.2% capacity retention after 20 000 cycles at 5 A g −1 . Remarkably, pouch‐type cells also sustain 700 cycles. This work opens a new avenue for achieving highly reversible Zn anodes through grain‐oriented dissolution.
- 8 May 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (26) , e6295065
Grain‐Oriented Dissolution Enabled by Hydrogel for Highly Reversible Zn Anodes
The reversibility of Zn anodes is severely compromised by dendritic growth and parasitic hydrogen evolution reactions. Directing Zn to undergo grain‐oriented stripping offers an effective approach to mitigating these issues. However, this strategy has rarely been explored, and the underlying mechanism remains unclear. Herein, we design a multifunctional hydrogel composed of aramid nanofiber‐polyvinyl alcohol (ANF‐PVA) and calcium lignosulfonate (LS) to dynamically regulate the anode interface. The ANF‐PVA hydrogel framework possesses excellent mechanical stability and a uniform porous structure that promotes a homogeneous electric field distribution. Concurrently, the incorporated LS preferentially adsorbs onto specific Zn crystal planes, which equilibrates the stripping energy barrier. Through the synergistic regulation between ANF‐PVA and LS, grain‐oriented dissolution is achieved. The in situ formed solid electrolyte interphase (SEI) can further guide uniform Zn deposition and effectively suppress side reactions. Consequently, Zn||Zn symmetric cells exhibit exceptional cycling stability under both ambient (5000 h at 2 mA cm −2 /1 mAh cm −2 ) and low‐temperature conditions (10 900 h at −40 °C). The Zn||I 2 full cell achieves 78.2% capacity retention after 20 000 cycles at 5 A g −1 . Remarkably, pouch‐type cells also sustain 700 cycles. This work opens a new avenue for achieving highly reversible Zn anodes through grain‐oriented dissolution.
- 8 May 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (26) , e6295065
Grain‐Oriented Dissolution Enabled by Hydrogel for Highly Reversible Zn Anodes
The reversibility of Zn anodes is severely compromised by dendritic growth and parasitic hydrogen evolution reactions. Directing Zn to undergo grain‐oriented stripping offers an effective approach to mitigating these issues. However, this strategy has rarely been explored, and the underlying mechanism remains unclear. Herein, we design a multifunctional hydrogel composed of aramid nanofiber‐polyvinyl alcohol (ANF‐PVA) and calcium lignosulfonate (LS) to dynamically regulate the anode interface. The ANF‐PVA hydrogel framework possesses excellent mechanical stability and a uniform porous structure that promotes a homogeneous electric field distribution. Concurrently, the incorporated LS preferentially adsorbs onto specific Zn crystal planes, which equilibrates the stripping energy barrier. Through the synergistic regulation between ANF‐PVA and LS, grain‐oriented dissolution is achieved. The in situ formed solid electrolyte interphase (SEI) can further guide uniform Zn deposition and effectively suppress side reactions. Consequently, Zn||Zn symmetric cells exhibit exceptional cycling stability under both ambient (5000 h at 2 mA cm −2 /1 mAh cm −2 ) and low‐temperature conditions (10 900 h at −40 °C). The Zn||I 2 full cell achieves 78.2% capacity retention after 20 000 cycles at 5 A g −1 . Remarkably, pouch‐type cells also sustain 700 cycles. This work opens a new avenue for achieving highly reversible Zn anodes through grain‐oriented dissolution.