Bangga Dirgantara Adiputra
Bangga Dirgantara Adiputra has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Elisabeth Anna Prattiwi
Department of Aerospace Engineering, ITD Adisutjipto
3 shared publications Sri Mulyani
Department of Aerospace Engineering, ITD Adisutjipto, Indonesia
3 shared publications- Fajar Khanif Rahmawati
Institut Teknologi Dirgantara Adisutjipto
2 shared publications - Arwin Datumaya Wahyudi Sumari
State Polytechnic of Malang
1 shared publication - Asih Pujiastuti
Universitas Antakusuma
1 shared publication - Denny Dermawan
Institut Teknologi Dirgantara Adisutjipto
1 shared publication
Latest Publications
- Open Access
- 22 January 2026
- Published by Institut Teknologi Dirgantara Adisutjipto (ITDA) in Vortex
- Vol. 6 (2) , 53-60
Analysis Problem of Air Bleed Maintenance Message Using Fault Tree Analysis (FTA) Method
The Airbus A320 has two main engines and an Auxiliary Power Unit (APU) that generate high-temperature, high-pressure bleed air used for cabin cooling, anti-icing, and pressurization. Two temperature sensors, Fire Loop A and Fire Loop B, monitor the bleed air distribution line for hot air leaks. An Air Bleed Maintenance Message signals a malfunction in these fire protection loops and requires quick maintenance to avoid system failure. Leaks, especially near the wing and fuel tank, pose significant hazards. This study uses Fault Tree Analysis (FTA) to find the root causes of this message. The main causes identified are damaged interconnecting cables, failure in the Bleed Monitoring Computer (BMC), and faults in Fire Loop A or B. The FTA diagram helps technicians trace each component's role in the failure, aiding efficient inspection and maintenance. This method aims to boost system reliability and improve flight safety.
- 22 January 2026
- Published by Institut Teknologi Dirgantara Adisutjipto (ITDA) in Vortex
- Vol. 6 (2) , 53-60
Open AccessAnalysis Problem of Air Bleed Maintenance Message Using Fault Tree Analysis (FTA) Method
The Airbus A320 has two main engines and an Auxiliary Power Unit (APU) that generate high-temperature, high-pressure bleed air used for cabin cooling, anti-icing, and pressurization. Two temperature sensors, Fire Loop A and Fire Loop B, monitor the bleed air distribution line for hot air leaks. An Air Bleed Maintenance Message signals a malfunction in these fire protection loops and requires quick maintenance to avoid system failure. Leaks, especially near the wing and fuel tank, pose significant hazards. This study uses Fault Tree Analysis (FTA) to find the root causes of this message. The main causes identified are damaged interconnecting cables, failure in the Bleed Monitoring Computer (BMC), and faults in Fire Loop A or B. The FTA diagram helps technicians trace each component's role in the failure, aiding efficient inspection and maintenance. This method aims to boost system reliability and improve flight safety.
- 23 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 631-636
A Unique Dataset for Aircraft Maintenance Assistance's Human Following Robot
Datasets are a critical component of an Artificial Intelligence-based system, specifically Machine Learning and its derivatives, such as deep learning. Datasets are the primary requirement to build knowledge about a phenomenon faced in the real world. This research is part of designing and implementing the Human Following Robot (HFR), a robot designed to follow humans with specific tasks assigned to them. Our designed and implemented HFR is intended to help aircraft technicians or mechanics perform aircraft maintenance in shelters that can be very far from the storage room of aircraft maintenance equipment by bringing the aircraft maintenance equipment or tool kit. We have developed the DINI dataset to enable the HFR to assist the Indonesian Air Force technicians effectively. This custom dataset stores image data from the typical uniform color of the Indonesian Air Force personnel, namely the blue color, which was built specifically for HFR. The dataset development involved finding the image data sources, data collection, dataset creation using Roboflow tool, and dataset testing. The created dataset with 1,451 images is vital to train and test HFR's ability to recognize blue uniforms. To measure its performance, the dataset was tested using YOLO version 5n (YOLOv5n). The results show that the DINI dataset achieved a Precision value of 100%, a Recall value of 42%, an Accuracy value of 87%, and an F1-score value of 59%. These results also show that the DINI dataset can be enhanced to accommodate other colors as needed in the field.
- 23 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 631-636
A Unique Dataset for Aircraft Maintenance Assistance's Human Following Robot
Datasets are a critical component of an Artificial Intelligence-based system, specifically Machine Learning and its derivatives, such as deep learning. Datasets are the primary requirement to build knowledge about a phenomenon faced in the real world. This research is part of designing and implementing the Human Following Robot (HFR), a robot designed to follow humans with specific tasks assigned to them. Our designed and implemented HFR is intended to help aircraft technicians or mechanics perform aircraft maintenance in shelters that can be very far from the storage room of aircraft maintenance equipment by bringing the aircraft maintenance equipment or tool kit. We have developed the DINI dataset to enable the HFR to assist the Indonesian Air Force technicians effectively. This custom dataset stores image data from the typical uniform color of the Indonesian Air Force personnel, namely the blue color, which was built specifically for HFR. The dataset development involved finding the image data sources, data collection, dataset creation using Roboflow tool, and dataset testing. The created dataset with 1,451 images is vital to train and test HFR's ability to recognize blue uniforms. To measure its performance, the dataset was tested using YOLO version 5n (YOLOv5n). The results show that the DINI dataset achieved a Precision value of 100%, a Recall value of 42%, an Accuracy value of 87%, and an F1-score value of 59%. These results also show that the DINI dataset can be enhanced to accommodate other colors as needed in the field.
- Open Access
- 29 March 2025
- Published by Atlantis Press SARL
- p. 102-110
Virtual Reality of Low Bypass Turbofan Engine Components as Educational Tourism Media
- 29 March 2025
- Published by Atlantis Press SARL
- p. 102-110
Open AccessVirtual Reality of Low Bypass Turbofan Engine Components as Educational Tourism Media
- Open Access
- 14 January 2025
- Published by Institut Teknologi Dirgantara Adisutjipto (ITDA) in Vortex
- Vol. 6 (1) , 22-28
Analysis Pneumatic System of The Causes of Engine Bleed Trip on Boeing 737-900 ER Aircraft Using the Fault Tree Analysis (FTA) Method
The Engine Bleed Air system is one of the primary systems in an aircraft and Its components include the Pressure Regulating Shutoff Valve (PRSOV), Bleed Air Regulator (BAR), High Stage Valve (HSV), High Stage Regulator (HSR), Precooler Control Valve (PCCV), and PCCV sensors 390 and 450. Any malfunction in these components can directly impact aircraft safety and flight operations. This research analyzes the performance failures of the system in regulating the temperature and pressure distributed by the bleed air system, particularly focusing on engine bleed trips. This study aims to determine the percentage of necessary component replacements in the air bleed engine system using the Fault Tree Analysis (FTA) method. Primary data is collected from aircraft maintenance databases and interviews. The percentage of main component replacements needed are: thermostat sensor 390 (42.3%), Precooler Control Valve (19.2%), Pressure Regulating Shutoff Valve (11.5%), and Bleed Air Regulator (7.7%). The remaining components account for the other percentages.
- 14 January 2025
- Published by Institut Teknologi Dirgantara Adisutjipto (ITDA) in Vortex
- Vol. 6 (1) , 22-28
Open AccessAnalysis Pneumatic System of The Causes of Engine Bleed Trip on Boeing 737-900 ER Aircraft Using the Fault Tree Analysis (FTA) Method
The Engine Bleed Air system is one of the primary systems in an aircraft and Its components include the Pressure Regulating Shutoff Valve (PRSOV), Bleed Air Regulator (BAR), High Stage Valve (HSV), High Stage Regulator (HSR), Precooler Control Valve (PCCV), and PCCV sensors 390 and 450. Any malfunction in these components can directly impact aircraft safety and flight operations. This research analyzes the performance failures of the system in regulating the temperature and pressure distributed by the bleed air system, particularly focusing on engine bleed trips. This study aims to determine the percentage of necessary component replacements in the air bleed engine system using the Fault Tree Analysis (FTA) method. Primary data is collected from aircraft maintenance databases and interviews. The percentage of main component replacements needed are: thermostat sensor 390 (42.3%), Precooler Control Valve (19.2%), Pressure Regulating Shutoff Valve (11.5%), and Bleed Air Regulator (7.7%). The remaining components account for the other percentages.