Elvia Soraya Santos Nascimento
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Elvia Soraya Santos Nascimento has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Cochiran Pereira dos Santos
Physics Department, Federal University of Sergipe, São Cristóvão 49107-230, SE, Brazil
2 shared publications - Herbet Alves de Oliveira
Instituto Federal de Sergipe, Brasil
2 shared publications - Maria de Andrade Gomes
Physics Department, Federal University of Sergipe, São Cristóvão 49107-230, SE, Brazil
2 shared publications - Mario Ernesto Giroldo Valerio
Federal University of Sergipe, Brazil
2 shared publications - Zélia Soares Macedo
Materials Science and Engineering Department, Federal University of Sergipe, São Cristóvão 49107-230, SE, Brazil
2 shared publications
Latest Publications
- Open Access
Sustainable Use of Gypsum Waste for Applications in Soil–Cement Bricks: Mechanical, Environmental, and Durability Performance
This study investigates the use of gypsum waste from civil construction as a partial substitute for cement in soil–cement formulations, aiming to produce eco-friendly bricks aligned with circular economy principles. Formulations were prepared using a 1:8 cement–soil ratio, with gypsum replacing cement in proportions ranging from 5% to 40%. The raw materials were characterized in terms of chemical composition, crystalline phases, plasticity, and thermal behavior. Specimens, molded by uniaxial pressing into cylindrical bodies and cured for either 7 or 28 days, were evaluated for compressive strength, water absorption, durability, and microstructure. Water absorption remained below 20% in all samples, with an average value of 16.20%. Compressive strength after 7 days exhibited a slight reduction with increasing gypsum content, ranging from 16.36 MPa (standard formulation) to 13.74 MPa (40% gypsum), all meeting the quality standards. After 28 days of curing, the formulation containing 10% gypsum achieved the highest compressive strength (26.7 MPa), surpassing the reference sample (25.2 MPa). Mass loss during wetting–drying cycles remained within acceptable limits for formulations incorporating up to 20% gypsum. Notably, samples with 5% and 10% gypsum demonstrated superior mechanical performance, while the 20% formulation showed performance comparable to the standard formulation. These findings indicate that replacing up to 20% of cement with gypsum waste is a technically and environmentally viable approach, supporting sustainable development, circular economy, and reduction of construction-related environmental impacts.
Open AccessSustainable Use of Gypsum Waste for Applications in Soil–Cement Bricks: Mechanical, Environmental, and Durability Performance
This study investigates the use of gypsum waste from civil construction as a partial substitute for cement in soil–cement formulations, aiming to produce eco-friendly bricks aligned with circular economy principles. Formulations were prepared using a 1:8 cement–soil ratio, with gypsum replacing cement in proportions ranging from 5% to 40%. The raw materials were characterized in terms of chemical composition, crystalline phases, plasticity, and thermal behavior. Specimens, molded by uniaxial pressing into cylindrical bodies and cured for either 7 or 28 days, were evaluated for compressive strength, water absorption, durability, and microstructure. Water absorption remained below 20% in all samples, with an average value of 16.20%. Compressive strength after 7 days exhibited a slight reduction with increasing gypsum content, ranging from 16.36 MPa (standard formulation) to 13.74 MPa (40% gypsum), all meeting the quality standards. After 28 days of curing, the formulation containing 10% gypsum achieved the highest compressive strength (26.7 MPa), surpassing the reference sample (25.2 MPa). Mass loss during wetting–drying cycles remained within acceptable limits for formulations incorporating up to 20% gypsum. Notably, samples with 5% and 10% gypsum demonstrated superior mechanical performance, while the 20% formulation showed performance comparable to the standard formulation. These findings indicate that replacing up to 20% of cement with gypsum waste is a technically and environmentally viable approach, supporting sustainable development, circular economy, and reduction of construction-related environmental impacts.
- Open Access
- 2 April 2025
- Published by MDPI AG in Preprints.org
Sustainable Use of Gypsum Waste for Applications in Soil-Cement Bricks: Mechanical, Environmental, and Durability Performance
This study explores the use of gypsum waste from civil construction as a partial replacement for cement in soil-cement formulations, aiming to produce eco-friendly bricks aligned with circular economy principles. Formulations were prepared using a 1:8 cement-to-soil ratio, with gypsum replacing cement in proportions ranging from 5% to 40%. The raw materials were characterized in terms of their chemical composition, crystalline phases, plasticity, and thermal profile. The formulations, molded by uniaxial pressing into cilindrical bodies and cured for 7 or 28 days, were tested for crystalline phases, compressive strength, water absorption, durability, and microstructure. Water absorption remained below 20% for all samples, with an average value of 16.20%. Compressive strength after 7 days decreased slightly with increasing gypsum content, from 16.36 MPa (0% gypsum) to 13.74 MPa (40% gypsum), still meeting the quality standard. After 28 days of curing, the formulation containing 10% gypsum achieved the highest strength (26.7 MPa), surpassing the reference sample without gypsum (25.2 MPa). Mass loss due to water immersion remained within acceptable limits for formulations containing up to 20% gypsum. Notably, samples with 5% and 10% gypsum exhibited superior mechanical performance, while samples with 20% gypsum showed comparable results to the reference. These findings suggest that replacing up to 20% of cement with gypsum waste is a viable and sustainable alternative, promoting circular economy practices and reducing the environmental impact of construction waste.
- 2 April 2025
- Published by MDPI AG in Preprints.org
Open AccessSustainable Use of Gypsum Waste for Applications in Soil-Cement Bricks: Mechanical, Environmental, and Durability Performance
This study explores the use of gypsum waste from civil construction as a partial replacement for cement in soil-cement formulations, aiming to produce eco-friendly bricks aligned with circular economy principles. Formulations were prepared using a 1:8 cement-to-soil ratio, with gypsum replacing cement in proportions ranging from 5% to 40%. The raw materials were characterized in terms of their chemical composition, crystalline phases, plasticity, and thermal profile. The formulations, molded by uniaxial pressing into cilindrical bodies and cured for 7 or 28 days, were tested for crystalline phases, compressive strength, water absorption, durability, and microstructure. Water absorption remained below 20% for all samples, with an average value of 16.20%. Compressive strength after 7 days decreased slightly with increasing gypsum content, from 16.36 MPa (0% gypsum) to 13.74 MPa (40% gypsum), still meeting the quality standard. After 28 days of curing, the formulation containing 10% gypsum achieved the highest strength (26.7 MPa), surpassing the reference sample without gypsum (25.2 MPa). Mass loss due to water immersion remained within acceptable limits for formulations containing up to 20% gypsum. Notably, samples with 5% and 10% gypsum exhibited superior mechanical performance, while samples with 20% gypsum showed comparable results to the reference. These findings suggest that replacing up to 20% of cement with gypsum waste is a viable and sustainable alternative, promoting circular economy practices and reducing the environmental impact of construction waste.