Oliyad Teferi Dibisa
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Oliyad Teferi Dibisa has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Tim Andreas Osswald
Polymer Engineering Center, Department of Mechanical Engineering University of Wisconsin‐Madison Madison Wisconsin USA
3 shared publications Allen Jonathan Román
Argonne National Laboratory Lemont USA
1 shared publication- Allen Jonathan Román
Polymer Engineering Center, Department of Mechanical Engineering University of Wisconsin‐Madison Madison Wisconsin USA
1 shared publication Grace O'BRien
Polymer Engineering Center, Department of Mechanical Engineering University of Wisconsin‐Madison Madison Wisconsin USA
1 shared publicationHannah Cabush
Polymer Engineering Center, Department of Mechanical Engineering University of Wisconsin‐Madison Madison Wisconsin USA
1 shared publication- Héctor Arroyave-Miranda
Polymer Engineering Center, Department of Mechanical Engineering, University of Wisconsin-Madison 1 , Madison, Wisconsin 50706
1 shared publication
Latest Publications
- Open Access
- 3 July 2025
- Published by Wiley in Polymer Engineering & Science
Characterization of Natural Rubber Latex With High‐Sensitivity, Diffusion‐Ordered, and Time Domain NMR
How reliable is our century‐old understanding of natural‐rubber latex (NRL) when examined through the lens of modern analytical techniques, such as nuclear magnetic resonance (NMR)? For decades, the scientific community has assumed that NRL comprises a branched/network polyisoprene structure, with covalently linked phospholipids and proteins purportedly responsible for its elasticity, curing kinetics, and film‐forming properties. However, this perspective is derived from post‐coagulation solids rather than the native colloidal structure found in living latex. In this study, we meticulously re‐evaluate native latex in three distinct forms: ammonia‐stabilized (pH ≈ 10), ammonia‐free (pH ≈ 3.5), and deproteinized/saponified, then re‐alkalized, utilizing a series of advanced NMR techniques, including chemical shift (1H/13C and 2D), Diffusion‐Ordered Spectroscopy (DOSY), and Relaxation (TD‐NMR). Our high‐resolution spectra provide compelling evidence for a linear cis‐1,4‐polyisoprene backbone that lacks any branched structural features. The 31P–1H HMBC results connect phosphorus resonances exclusively to small‐molecule protons in the range of 3.6–4.2 ppm. The DOSY analysis effectively attributes these resonances to rapidly diffusing phosphocholine and glycerol‐phosphate (D ≈ 5–6 × 10−10 m2s−1), distinctly separated from the immobile rubber matrix. Additionally, the TD‐NMR data delineate a microsecond core (T2 ≈ 5 μs) alongside a millisecond interfacial shell (T2 ≈ 0.8–1.4 ms), which expands in basic conditions and dissipates upon saponification. Importantly, our quantitative inverse‐gated 13C measurements indicate that any phosphate‐terminated chains exist at concentrations below 0.05 mol%. The accumulated evidence strongly supports a pH‐responsive lipid–protein corona encasing a linear polyisoprene core.
- 3 July 2025
- Published by Wiley in Polymer Engineering & Science
Open AccessCharacterization of Natural Rubber Latex With High‐Sensitivity, Diffusion‐Ordered, and Time Domain NMR
How reliable is our century‐old understanding of natural‐rubber latex (NRL) when examined through the lens of modern analytical techniques, such as nuclear magnetic resonance (NMR)? For decades, the scientific community has assumed that NRL comprises a branched/network polyisoprene structure, with covalently linked phospholipids and proteins purportedly responsible for its elasticity, curing kinetics, and film‐forming properties. However, this perspective is derived from post‐coagulation solids rather than the native colloidal structure found in living latex. In this study, we meticulously re‐evaluate native latex in three distinct forms: ammonia‐stabilized (pH ≈ 10), ammonia‐free (pH ≈ 3.5), and deproteinized/saponified, then re‐alkalized, utilizing a series of advanced NMR techniques, including chemical shift (1H/13C and 2D), Diffusion‐Ordered Spectroscopy (DOSY), and Relaxation (TD‐NMR). Our high‐resolution spectra provide compelling evidence for a linear cis‐1,4‐polyisoprene backbone that lacks any branched structural features. The 31P–1H HMBC results connect phosphorus resonances exclusively to small‐molecule protons in the range of 3.6–4.2 ppm. The DOSY analysis effectively attributes these resonances to rapidly diffusing phosphocholine and glycerol‐phosphate (D ≈ 5–6 × 10−10 m2s−1), distinctly separated from the immobile rubber matrix. Additionally, the TD‐NMR data delineate a microsecond core (T2 ≈ 5 μs) alongside a millisecond interfacial shell (T2 ≈ 0.8–1.4 ms), which expands in basic conditions and dissipates upon saponification. Importantly, our quantitative inverse‐gated 13C measurements indicate that any phosphate‐terminated chains exist at concentrations below 0.05 mol%. The accumulated evidence strongly supports a pH‐responsive lipid–protein corona encasing a linear polyisoprene core.
- Open Access
- 14 April 2025
- Published by Wiley in SPE Polymers
- Vol. 6 (2)
Ammonia‐free natural rubber latex photo‐resin for sustainable 3D printing of highly stretchable and tough elastomers
Vat photopolymerization (VPP) is one of the most successful additive manufacturing modalities, offering high printing resolution and a wide selection of photo‐resins for applications in aerospace, electronics, soft robotics, and biomedical devices. However, conventional photo‐resins, primarily derived from fossil resources, present sustainability challenges. They often rely on short‐chain oligomers that form brittle, dense polymer networks, limiting their performance in high‐demand applications, especially for elastomeric materials. In this study, we developed an ammonia‐free natural rubber latex‐based photo‐resin featuring an ultra‐high molecular weight polymer with low viscosity (2. Lower intensity resulted in lower in crosslinked density and higher intensity, in crosslink density. We systematically investigated multiscale structure–property relationships using spin–lattice (T1) and spin–spin (T2) relaxation analysis via inversion recovery and Carr‐Purcell‐Meiboom‐Gill. 18 mW/cm2 with 30 s of curing and drying resulted in two regimens of motion for Rubber polymer with intermediate crosslinking density and intermediate entanglements dominating the network. Also, 35 mW/cm2 with 30 s of curing and drying resulted in two regimes of Rubber polymer: however, one with a higher crosslinked and a mobile polymer phase. Optimized curing parameters enabled the fabrication of highly stretchable elastomers with 5–7.8 MPa tensile strengths and breaking strains of 750%–900%. These results highlight the potential of biomass‐based photo‐resins to advance sustainable 3D printing technologies. Furthermore, we demonstrated the feasibility of this formulation by printing complex geometries using a commercially available SLA printer.Highlights: Ammonia‐free latex resin cures rapidly at 2 curing. 35 mW/cm2 raises crosslink density to 1.4 × 10−4 g/mol for tougher parts. Printed elastomers achieve 5–7.8 MPa and 750%–900% strain in minimal time. Complex 3D prints validated on a standard Form 2 SLA printer.
- 14 April 2025
- Published by Wiley in SPE Polymers
- Vol. 6 (2)
Open AccessAmmonia‐free natural rubber latex photo‐resin for sustainable 3D printing of highly stretchable and tough elastomers
Vat photopolymerization (VPP) is one of the most successful additive manufacturing modalities, offering high printing resolution and a wide selection of photo‐resins for applications in aerospace, electronics, soft robotics, and biomedical devices. However, conventional photo‐resins, primarily derived from fossil resources, present sustainability challenges. They often rely on short‐chain oligomers that form brittle, dense polymer networks, limiting their performance in high‐demand applications, especially for elastomeric materials. In this study, we developed an ammonia‐free natural rubber latex‐based photo‐resin featuring an ultra‐high molecular weight polymer with low viscosity (2. Lower intensity resulted in lower in crosslinked density and higher intensity, in crosslink density. We systematically investigated multiscale structure–property relationships using spin–lattice (T1) and spin–spin (T2) relaxation analysis via inversion recovery and Carr‐Purcell‐Meiboom‐Gill. 18 mW/cm2 with 30 s of curing and drying resulted in two regimens of motion for Rubber polymer with intermediate crosslinking density and intermediate entanglements dominating the network. Also, 35 mW/cm2 with 30 s of curing and drying resulted in two regimes of Rubber polymer: however, one with a higher crosslinked and a mobile polymer phase. Optimized curing parameters enabled the fabrication of highly stretchable elastomers with 5–7.8 MPa tensile strengths and breaking strains of 750%–900%. These results highlight the potential of biomass‐based photo‐resins to advance sustainable 3D printing technologies. Furthermore, we demonstrated the feasibility of this formulation by printing complex geometries using a commercially available SLA printer.Highlights: Ammonia‐free latex resin cures rapidly at 2 curing. 35 mW/cm2 raises crosslink density to 1.4 × 10−4 g/mol for tougher parts. Printed elastomers achieve 5–7.8 MPa and 750%–900% strain in minimal time. Complex 3D prints validated on a standard Form 2 SLA printer.
- 1 March 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (3)
Comparative rheology and microstructure analysis of natural rubber latex with conventional and eco-friendly preservatives
This study explores how three distinct preservation techniques affect the microstructure and rheological properties of natural rubber latex. Traditional ammoniated systems were compared against two emerging eco-friendly preservatives developed by AFLatex Technologies, which demonstrated enhanced latex properties reported in Ammonia-Free Latex Compositions, US Patent Application 63/267,167.2022. 2023. Rheological data were modeled using the Cross model to capture the non-linearity of viscosity and the Krieger–Dougherty (K&D) model to describe viscosity as a function of volume fraction. We also proposed an extended K&D model to better fit experimental observations. Additionally, Taylor–Couette flow simulation were performed to investigate shear-induced particle migration, providing insights into the dynamic behavior of particles under varied shear conditions. Our findings showed differences in critical volume fraction; the ammoniated system exhibited a critical volume fraction range of 0.6–0.7, while the ammonia-free systems had a lower range of 0.4–0.55. These values align closely with the predication from the Cross model, which suggests critical volume fraction of 0.4–0.5 for ammonia-free systems and above 0.6 for ammoniated systems. The extended and original K&D models corroborated these findings, with the ammonia-free systems typically reaching a critical volume fraction of 0.55 and the ammoniated systems approaching 0.7. Simulations under simplified assumptions revealed that shear-induced migration can maintain approximately 20% of the particles at a critical volume fraction of around 0.48, underscoring the complex interplay of particle dynamics and preservation technique in determining natural rubber latex material properties.
- 1 March 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (3)
Comparative rheology and microstructure analysis of natural rubber latex with conventional and eco-friendly preservatives
This study explores how three distinct preservation techniques affect the microstructure and rheological properties of natural rubber latex. Traditional ammoniated systems were compared against two emerging eco-friendly preservatives developed by AFLatex Technologies, which demonstrated enhanced latex properties reported in Ammonia-Free Latex Compositions, US Patent Application 63/267,167.2022. 2023. Rheological data were modeled using the Cross model to capture the non-linearity of viscosity and the Krieger–Dougherty (K&D) model to describe viscosity as a function of volume fraction. We also proposed an extended K&D model to better fit experimental observations. Additionally, Taylor–Couette flow simulation were performed to investigate shear-induced particle migration, providing insights into the dynamic behavior of particles under varied shear conditions. Our findings showed differences in critical volume fraction; the ammoniated system exhibited a critical volume fraction range of 0.6–0.7, while the ammonia-free systems had a lower range of 0.4–0.55. These values align closely with the predication from the Cross model, which suggests critical volume fraction of 0.4–0.5 for ammonia-free systems and above 0.6 for ammoniated systems. The extended and original K&D models corroborated these findings, with the ammonia-free systems typically reaching a critical volume fraction of 0.55 and the ammoniated systems approaching 0.7. Simulations under simplified assumptions revealed that shear-induced migration can maintain approximately 20% of the particles at a critical volume fraction of around 0.48, underscoring the complex interplay of particle dynamics and preservation technique in determining natural rubber latex material properties.